1. Start with driver door Open 2. Insert and remove key twice 3. Close door twice leave open 4. Insert remove key once 5. Close door twice leave open 6 insert key, close door, 7. Turn ignition, turn back off remove key 8. simultaneous press lock and unlock buttons 9. Press lock or unlock
After the last step when you turn the ignition on/off you have to press the lock and unlock buttons on the new key fob (the one you want to program) for 3-5 seconds. And it should work!! I just programmed a key fob for a 2012 Scion XB.
Thanks!! The steps worked! The only thing is that on the step when you have to press both lock/unlock you didn’t specify that you have to press those buttons on the NEW remote for at least 3-5 seconds but it works. Thanks!!
Thank you! I found instructions written online but they were not exactly clear. Seeing you do it and mimicking your movements I got it on the first try! Saved me so much money!
Awesome. I can confirm these steps worked on my 2009 Scion xD. It took me a few times to get all the steps right, but it worked great with the aftermarket fob. At fist I thought it didn't work when I tested inside my car, but when I stepped out and tried from outside it worked! Now to find a locksmith willing to cut my new key...
Hi, we're you able to do this without cutting the key? How where you able to turn on and off the ignition?? I tried this without cutting the key but I couldn't turn the ignition on and off.
@@Beto_toro i’m on the same boat. the old key i had doesn’t have the controls on it im not sure if that affects if doing these steps works or not cause of that. i was able to program the immobilizer but not the lock controls
I just ordered my key! I can't wait! I only have a key without the lock and unlock feature on it. So i been having to manually lock and unlock my car. I checked to see if i can get into programming mode with this key first and i was able to do it! Can't wait to have keyless entry again! And for only 14 dollars! The dealership wanted to charge me 400 dollars for the same key fob! And i almost paid a private guy 175 dollars to put in a whole new remote keyless entry system into my car until i realized after reading online i could just buy one on ebay for cheap and program it myself! Sweet.
hello. were you able to get into programming mode with these steps? i too only have an old style key with no controls on it and it doesn’t seem to work i’ve done everything in the video and nothing
This totally works! My son and I were laughing hysterically while trying to perform the steps correctly and in order. We finally got it right on the 7th try. THANK YOU!!! 😄
Perfect Works great for my Toyota Scion 2010 You need to be patient, it’s necessary hold lock and unlock at the same time That’s part was difficult for me
Hi just wanted to thank you for your help with providing the information to program the key fob. It work it gave me a hard time at first but then I realized that you need to do it quickly in a timely manner for it to work. Thank you for your video it's very informative.
En mi Scion tC el último paso funcionó presionando el botón “unlock” lo estaba tratando de hacer con el botón “lock” y no funcionaba. Thanks for the tutorial master!
Llegó a la parte donde la puerta se cierra y abre ( additional mode) Pero Lugo presionó los dos el de bloqueo y desbloqueo simultáneamente presionó el desbloqueo durante 45 segundos pero no logró Algún consejo..
Lo tienes que presionar rápido primero los dos botones simultáneamente de lock y unlock y después de unos segundos solamente el botón de lock O unlock por sólo unos 3 segundos también y listo.
This worked to program two MOZB41TG keyless entry keys for my 2008 scion xD. Tried like 20 times and like other comments mentioned, the lock and unlock buttons need to be held for 3-4 seconds and it works. I had the keys cut at Home Depot while getting copies for house keys. They don't usually do it when you bring your own blank but just ask kindly. Thank you very much!
Door open Insert key and pull out 2 times Close and open door twice leave it open Put key in and take it out Open door twice then put key in then close the door
Hi my friend, this does work but you should consider editing your video so that we can get all the steps closer together... otherwise we have to write the steps down or go by memory😳 just saying, take care😊
***Do all these steps within 40 seconds and you should be good*** Starting with driver door open ... Step 1: insert and remove key twice without turning Step 2: close and open door twice Step 3: insert key & pull it out Step 4: close and open door twice Step 5: insert key and close door Step 6: turn key to ON position then back to lock Step 7: remove key and you should see/hear the locks Step 8: press and hold lock and unlock on the key FOB simultaneously for one second... Step 9: and then immediately press only the lock button for 2 seconds Step 10: DONE🤓
I tried this 20 times already. I got the 2010 corolla into program mode even got doors to lock with new remote but it lock cycles 4 times and never programs. I even tried the ignition twice as well. Can't get it to work.
Thank you very much because I had the same procedure issue by waiting too long and I had to do it three or four times myself....😮. Ended up working out just fine... Thanks again...
THANK YOU very much. You save me 90 dollars. Faster is better. When you pull the key out and press the open and lock you have to do it quickly, then press the open or close button. Very awesome thanks again.
Greats videos. Thank you for your hard work. Cheers. I am always wondering when I am watching your videos about your accent. It reminds me the Czech Republic.
Thank you thank you thank you!! This saved me so much money. I watched both videos and programmed the new key successfully the first time. I really appreciate you taking the time to film and upload this video. I will be sharing this with other people 😁♥️
@@vermouth07 Thanks for the response. I just got a 2005 Scion tc that needs work. Both of the key fobs are trashed. I was thinking of selling the car once I found out it was going to cost about $600 for keys.
Good afternoon friend, I am a follower of your videos that are very interesting and informative and learning at the same time .... I greet you and in turn I ask you for information on how to program a key for a TOYOTA COROLLA 2015 .... I thank you anticipated.
And the dealer said i couldn't do it that they had to program it. Thanks will give this a try on my 08. Xb. Also getting ready to buy tech stream so ill be able to do it either way.
I have Toyota corolla LE 2013, I just have an issue with my remote key doesn't work on the door, I replace the battery key, still not working ? There is no communication with the car. I tried both my remote keys but they don't work either. Can you please tell me what could be the problem ? Thank you
Thanks for that, going to try and add a new key to my truck as I only have the one master key - no spares. Here is a question for you (or anyone else that can pitch in) My truck uses the same key that is used on this video - the electronic buttons all work correctly, however... If I use the cut section of the key (manually in the door lock) I can lock and unlock the cab, but, When I open the door after unlocking manually, the vehicle alarm goes off and I have to use the electronic button to switch it off. As I say, lock unlock alarm all function correctly using the electronic buttons, it is only when I use the "CUT" key in the drivers lock that the alarm goes off. any ideas? Thanks.
Doesn't work on my 2014 Scion xb.. I get to the part where it locks and unlocks on its own but when I press lock unlock simultaneously and lock or unlock nothing happens. Tried it about 300 times
Thank you for this video. I know it's been 2 years, but I have an idea. When doing the video, how about doing it like you did in this video, so we can see and hear you explain it all. Then, just film without explaining anything, doing the steps quickly, so that we can see the actual work being done :o)
Worked perfect except my panic button on new key fob won't work but panic button on original key fob does work. I can shut panic off with new key fob but can't turn it on . Do you have a solution?
I have a Sicon im 2016 the computer is showing me that there is a problem with the immobilizer I changed the immobilizer transponder, and reprogram it, once I reprogram it the car will start but once I turn off the car, the car won't turn ON gain unless I reprogram it can I know what is the problem NOTE: when the car keyfob is in the car key cylinder the security light will turn off can I know what is the problem
@@christopherfranz1547 Yes I watched the whole thing. Did you? He said it works on MANY DIFFERENT MODELS. That general piece of information means nothing to me if "many different models" doesn't include mine. Not interested in crap shoots and rolling of dice. Specifics is what I'm after. I don't want to to order a key and be stuck with it not working for that particular car.
Got an issue got the same car and key fob. Got the key cut and programmed the key fob but it opens and closes the doors but it doesn’t start the car? What can I do ?
Can someone help? I successfully did this. The new key now works to lock and unlock the car. I can put the ignition to ON but the car does not start with this key. The security light blinks when the new key is in the ignition. The car starts without issue with the original key.
I got stuck after the integration relay and heard the click sound for lock and unlock. I press the lock and unlock on the remote then lock button but nothing happened
I imagine you can. If it's just one door (mine has same problem) then it's likely a solenoid or wiring to that door - computer won't know or care about that.
1. Start with driver door Open
2. Insert and remove key twice
3. Close door twice leave open
4. Insert remove key once
5. Close door twice leave open
6 insert key, close door,
7. Turn ignition, turn back off remove key
8. simultaneous press lock and unlock buttons
9. Press lock or unlock
This worked perfectly!
Thank you Sir !
Thank you very much
does it matter if the old key you have has the controls on it or not?
thank youuu 💕
Been a year but thanks for this, made memorizing it easier
Worked for me on my 2011 tc! Took several attempts but finally programmed!
After the last step when you turn the ignition on/off you have to press the lock and unlock buttons on the new key fob (the one you want to program) for 3-5 seconds. And it should work!! I just programmed a key fob for a 2012 Scion XB.
Wow thank you 🙏 Today I just paid $180 to a locksmith and he did the same thing. Did not know that this information was on CZcams.
Thanks!! The steps worked! The only thing is that on the step when you have to press both lock/unlock you didn’t specify that you have to press those buttons on the NEW remote for at least 3-5 seconds but it works. Thanks!!
Thank you! I found instructions written online but they were not exactly clear. Seeing you do it and mimicking your movements I got it on the first try! Saved me so much money!
I love Toyotas ....but I am amazed at the weird steps necessary. I'm surprised you don't stand on your head and rub your stomach! LOL
I guess they need to make it esoteric enough that you'd never manage to accidentally put it in programming mode. Makes sense to me.
To make us crazy lol
Awesome. I can confirm these steps worked on my 2009 Scion xD. It took me a few times to get all the steps right, but it worked great with the aftermarket fob. At fist I thought it didn't work when I tested inside my car, but when I stepped out and tried from outside it worked! Now to find a locksmith willing to cut my new key...
Hi, we're you able to do this without cutting the key? How where you able to turn on and off the ignition?? I tried this without cutting the key but I couldn't turn the ignition on and off.
@@Beto_toro i’m on the same boat. the old key i had doesn’t have the controls on it im not sure if that affects if doing these steps works or not cause of that. i was able to program the immobilizer but not the lock controls
I just ordered my key! I can't wait! I only have a key without the lock and unlock feature on it. So i been having to manually lock and unlock my car. I checked to see if i can get into programming mode with this key first and i was able to do it! Can't wait to have keyless entry again! And for only 14 dollars! The dealership wanted to charge me 400 dollars for the same key fob! And i almost paid a private guy 175 dollars to put in a whole new remote keyless entry system into my car until i realized after reading online i could just buy one on ebay for cheap and program it myself! Sweet.
hello. were you able to get into programming mode with these steps? i too only have an old style key with no controls on it and it doesn’t seem to work i’ve done everything in the video and nothing
How much in ebay?
your honesty and determination goes a long way...we appreciate all your vids . Thank you !
This totally works! My son and I were laughing hysterically while trying to perform the steps correctly and in order. We finally got it right on the 7th try. THANK YOU!!! 😄
Perfect
Works great for my Toyota Scion 2010
You need to be patient, it’s necessary hold lock and unlock at the same time
That’s part was difficult for me
Definitely works! Did it like 3 times because it does need to be a little quicker. Now I can unlock and lock my doors. Thanks man!
Hi just wanted to thank you for your help with providing the information to program the key fob. It work it gave me a hard time at first but then I realized that you need to do it quickly in a timely manner for it to work. Thank you for your video it's very informative.
THANK YOU, you have saved people a lot of money with this info
En mi Scion tC el último paso funcionó presionando el botón “unlock” lo estaba tratando de hacer con el botón “lock” y no funcionaba. Thanks for the tutorial master!
Llegó a la parte donde la puerta se cierra y abre ( additional mode)
Pero Lugo presionó los dos el de bloqueo y desbloqueo simultáneamente presionó el desbloqueo durante 45 segundos pero no logró
Algún consejo..
Lo tienes que presionar rápido primero los dos botones simultáneamente de lock y unlock y después de unos segundos solamente el botón de lock O unlock por sólo unos 3 segundos también y listo.
This worked to program two MOZB41TG keyless entry keys for my 2008 scion xD. Tried like 20 times and like other comments mentioned, the lock and unlock buttons need to be held for 3-4 seconds and it works. I had the keys cut at Home Depot while getting copies for house keys. They don't usually do it when you bring your own blank but just ask kindly. Thank you very much!
Worked perfectly on my Scion Xb 2009. Thanks
Door open
Insert key and pull out 2 times
Close and open door twice leave it open
Put key in and take it out
Open door twice then put key in then close the door
Hi my friend, this does work but you should consider editing your video so that we can get all the steps closer together... otherwise we have to write the steps down or go by memory😳 just saying, take care😊
***Do all these steps within 40 seconds and you should be good***
Starting with driver door open ...
Step 1: insert and remove key twice without turning
Step 2: close and open door twice
Step 3: insert key & pull it out
Step 4: close and open door twice
Step 5: insert key and close door
Step 6: turn key to ON position then back to lock
Step 7: remove key and you should see/hear the locks
Step 8: press and hold lock and unlock on the key FOB simultaneously for one second...
Step 9: and then immediately press only the lock button for 2 seconds
Step 10: DONE🤓
Bro your a life saver. I thought I was gonna have to make a list all by myself😳. THANK YOU
do you know if the existing key has to have the lock controls on it for this to work?
@garcia_2615 not sure sorry
@@chefdeena thanks for the reply
My friend it was great video. Now my remote is working as well. My recommendation to everyone write everything down than work on your remote
Thank works great. On my first try !!
Saved me tons of money.
Got the Amazon key got it cut for $10.
I tried this 20 times already. I got the 2010 corolla into program mode even got doors to lock with new remote but it lock cycles 4 times and never programs. I even tried the ignition twice as well. Can't get it to work.
Did you ever get it to work? Mine is doing that now.
Thank you very much because I had the same procedure issue by waiting too long and I had to do it three or four times myself....😮. Ended up working out just fine... Thanks again...
literally did it in less than a minute, still work 👏
This worked! Saved hundreds of dollars following both videos steps. Thank YOU!
Had to do it several times but it worked and save me a ton of money to program the key professionally thank you thank you thank you very much.
THANK YOU very much. You save me 90 dollars. Faster is better. When you pull the key out and press the open and lock you have to do it quickly, then press the open or close button. Very awesome thanks again.
Do keys randomly stop working?? Or should I try to reprogram my current key
I did the same a few years ago with my 2002 Highlander. Good video.Keep it up.
Greats videos. Thank you for your hard work. Cheers. I am always wondering when I am watching your videos about your accent. It reminds me the Czech Republic.
From where did you obtain the instructions to perform key programming?
Flice Water a good seller normally sends them with the key or have access on a website to them
Thank you thank you thank you!! This saved me so much money. I watched both videos and programmed the new key successfully the first time. I really appreciate you taking the time to film and upload this video. I will be sharing this with other people 😁♥️
Where did you purchase the new key fob from?
@@twofry64 I purchased mine from Amazon.
@@vermouth07 Thanks for the response. I just got a 2005 Scion tc that needs work. Both of the key fobs are trashed. I was thinking of selling the car once I found out it was going to cost about $600 for keys.
@@twofry64 Yes, they almost got me with that crazy price as well lol. This was super easy to do and the amount of money saved was priceless.
Good afternoon friend, I am a follower of your videos that are very interesting and informative and learning at the same time .... I greet you and in turn I ask you for information on how to program a key for a TOYOTA COROLLA 2015 .... I thank you anticipated.
And the dealer said i couldn't do it that they had to program it. Thanks will give this a try on my 08. Xb. Also getting ready to buy tech stream so ill be able to do it either way.
Just programmed it on my new keys, but the panic button don’t work any solution to make that work I would appreciate it
Would this work on 2006 Scion TC?
Any idea where the alarm chirp buzzer is or how to disable? My 08 xb chirps every time i hit the unlock/lock on keyfob
I have Toyota corolla LE 2013, I just have an issue with my remote key doesn't work on the door, I replace the battery key, still not working ? There is no communication with the car. I tried both my remote keys but they don't work either. Can you please tell me what could be the problem ? Thank you
Thank you sir. Your videos are very helpful but my 2008 will not do. The automatic lock will not go into programming mode what is the problem?
This worked like charm, on the first try. Thank you!
I would go nuts smash the key then have a shot of jack Daniel's whiskey
Do you know if 2010 Scion XB key is no chip key?
Worked perfectly 👍
Thank you very much. Worked as advertised
Thanks for that, going to try and add a new key to my truck as I only have the one master key - no spares. Here is a question for you (or anyone else that can pitch in) My truck uses the same key that is used on this video - the electronic buttons all work correctly, however... If I use the cut section of the key (manually in the door lock) I can lock and unlock the cab, but, When I open the door after unlocking manually, the vehicle alarm goes off and I have to use the electronic button to switch it off. As I say, lock unlock alarm all function correctly using the electronic buttons, it is only when I use the "CUT" key in the drivers lock that the alarm goes off. any ideas? Thanks.
Took me a few time but it worked. Thanks for your videos
Doesn't work on my 2014 Scion xb.. I get to the part where it locks and unlocks on its own but when I press lock unlock simultaneously and lock or unlock nothing happens. Tried it about 300 times
Thank you for this video. I know it's been 2 years, but I have an idea. When doing the video, how about doing it like you did in this video, so we can see and hear you explain it all. Then, just film without explaining anything, doing the steps quickly, so that we can see the actual work being done :o)
Worked perfect except my panic button on new key fob won't work but panic button on original key fob does work. I can shut panic off with new key fob but can't turn it on . Do you have a solution?
I had to almost memorize the steps to do it faster but I got it done by the 3 time!!!
Is the process the same for all Toyota vehicles? Also saw your vid on ignition program.
Thanks for the video
I have a Sicon im 2016 the computer is showing me that there is a problem with the immobilizer I changed the immobilizer transponder, and reprogram it, once I reprogram it the car will start but once I turn off the car, the car won't turn ON gain unless I reprogram it can I know what is the problem
NOTE: when the car keyfob is in the car key cylinder the security light will turn off can I know what is the problem
I really enjoy your videos! Thanks for sharing your knowledge! 👍
Wnere did you get the steps for key working ?
Thank you, your video helped me program my new key same as yours!
Thank you for helping me program my remote. 👍
How did you program the alarm and how do you reprogram it if it needs 3 or 4 button presses to fully unlock all doors, but lock works fine?
Thank you boss. I successfully programed my spare key.
i was able to program a new key fob I just got but I can’t seem to get it to work for the controls. Can someone help please?
How do I get the car to beep when I lock or unlock the car?
Worked for me the first time!
Sane question i had on the last video...will this method work on a 2014 Toyota Corolla LE?
Did you watch to the end of the video?
@@christopherfranz1547 Yes I watched the whole thing. Did you? He said it works on MANY DIFFERENT MODELS. That general piece of information means nothing to me if "many different models" doesn't include mine. Not interested in crap shoots and rolling of dice. Specifics is what I'm after. I don't want to to order a key and be stuck with it not working for that particular car.
Did the transponder chip had to be programed first with the ignition.
Got an issue got the same car and key fob. Got the key cut and programmed the key fob but it opens and closes the doors but it doesn’t start the car? What can I do ?
Thank you for the video, sir. Is this the same process for a 2013 Scion tC ?
Love your channel. Keep up the great work.
Doesn’t work for my 2016 RAV4 LE. Can you please make a video for that SUV. Thanks in advance.
Great video and information as always.
What if all you have is a valet key ? Got a 2015 scion tc.
Hi thank you for time.
Would it be the same for 2011 as well?
Can you add the key using a bi-directional scantool like an Autel, Launch or Techtool?
Thank you sir!! I was able to do it! A life saver 😊😊
Can I complete these steps if I don’t have the master key with the buttons?
It worked... thanks for the video.
Thank you! Love your videos!
Worked like a champ
Thank you much, it wirked great 🎉
Best stuff buddy hope you keep making content on this scion tc your pretty awsome!!💪💯❤❤❤❤
Thanks again. Hope it works on my 2009 RAV4.
Did it work on your 09 ? I’m trying it on a 2011 Corolla 🤞🏻
Guys anybody tried the panic red button? That one is not working. For me .
100% util logre programar mi llave. Mil gracias por la aportación muy util
Como hiciste?
My doors just keeps locking and unlocking with pressing the buttons it’s endless. Don’t know what to do
Great Information! Thanks Brother!!
Can someone help?
I successfully did this. The new key now works to lock and unlock the car. I can put the ignition to ON but the car does not start with this key. The security light blinks when the new key is in the ignition.
The car starts without issue with the original key.
What if the ignition doesn’t turn?
Thanks!
Would this work for a 2011 Toyota Corolla le ? Thanks
Omg, thank you so much sir!!!!
I got stuck after the integration relay and heard the click sound for lock and unlock. I press the lock and unlock on the remote then lock button but nothing happened
I drive Scion tC 2008
If my toyota rear car door lock is not working with power, can I still program a new remote key with my toyota?
I imagine you can. If it's just one door (mine has same problem) then it's likely a solenoid or wiring to that door - computer won't know or care about that.
I did it !! Thank you, dude !!!
Will this work on 08 XD hatchback ?
Would this work with camry 08?
Im stuck on last step. Press simultan lock and open butt, press lock butt. And im wating. Nothings happen,? This my 5th try
thank you it work.
OK so I guess you need to have the key cut before you can program the locks since you need to be able to turn on the ignition.
why is every tc i see wrecked in the quarter
Nice job