Master Mechanic Restores A High-capacity Air Compressor Forgotten Perennial // Full Restoration
Vložit
- čas přidán 17. 10. 2023
- ► Contact Me: wtgroupvn@gmail.com
Thanks for watching, LIKE, Subscribe & Share!
Master Mechanic Restores A High-capacity Air Compressor Forgotten Perennial // Full Restoration
► Subscribe to channel: bit.ly/43ijIvt
►Restoration: bit.ly/3WLFBAA
© Copyright by Restorations Skills
#RestorationsSkills #Restorations #Skills
Air Compressor Tank should be check and inspected by authorised competent person to ensure that the fitness of the tank are in good working condition to prevent tank explodes if the machine is to be re-used again. Good job man.
Thank you for your feedback so we can improve future products. Wishing you good health
Просто нет слов. ОДНА СПЛОШНАЯ ХАЛТУРА!!!!!!!!!!!!!!!!!!!
You did a great job, the machine is beautiful, you are very talented. An old machine that has been restored to perfection and works great! Congratulations ! It's great. I want to see more videos like this!!
Thank you very much . Please always support us!
за такой некачественный ремонт надо руки отрывать! подшипники заменили с помощью молотка😂, весь инструмент один молоток! нет сьемников, и остального инструмента. Поршень зарядили кольцами с помощью отвертки. Ужасный ремонт, некачественный. Цилиндр ржавый был при сборке. В общем просто почистили и покрасили. это не ремонт а просто переборка кое как😂😂😂. я такому мастеру не доверил бы даже детский велосипед!!!
Quando ele bateu nos rolamentos com o martelo doeu até meu coração kkk. Use uma chave soquete para fazer isso meu amigo, assim vc bate por igual nos rolamentos.
Thank you very much my friend
the second part of this video was way over my head. I learned so SO much Thank a bunch Granny 92 USA.
Thank you very much
Perfectly good way of hammering in new ball bearings.
Belo compressor já nao existe disse restaraudo e uma loucura!
I love watching your videos ,no drama just great videos of a person who has great skills working with minimal tools.
Your videos are some of the best on any site I watch on utube. But the compressor for its size with 3 cylinders to compress air didn't build up much air pressure.
No
😅
ZiQkRi
Compared to other restoration videos this guy is toward the top of that list. Yes I would have concern also about the relief valves.
Awesome job on the on welding those parts together
The rust is real but the vines are fake, no need to makeup, the guy is skilled. That's all that matters, won my like.
Thank you very much. Please follow and support us!
@@restorationsskills4967 @
,
Congratulations. Hope you release more products🎊🎊
never knock the tab washer over on fly wheel
Um belíssimo trabalho parabéns abraços.
Thank you very much. Please follow and support us!
nice to see some primmer before top coat of paint
Thank you very much
I always enjoy your videos. This one from start to finish was very interesting. Thanks for sharing looking forward to your next project..
Thank you very much. Wishing you and your loved ones good health
@@restorationsskills4967thank you for saying that. I wish the same to you and your family.
That first part was awesome great work now the second part .
Thank you very much. Please follow and support us!
Hats off to you man.. that was a fantastic bit of work you done.. simply outstanding 👏 👌
Thank you very much . Please always follow and support us!
You need a sandblaster
Con xe tải biển quê e luôn ❤
Xem kênh của các anh rất cuốn nhé. Ủng hộ các anh 👍🏻
Thank you very much . Please always follow and support us!
How did you fix the rust in the air compressor cylinders?
I don't think he did,for a compressor this size it didn't build very much air pressure. I'd be interested to see how much pressure it will build and hold after running 5 minutes. As rusted as those cylinders were I'm pretty sure it's got blow by issues.
Probably a good thing with those tanks the way they are.... BOOM@@william6526
I did not see any honing of the bores, not even any pre lubing
Teflon tape not needed on a tapered joint.
E bom vê esses vídeos de restauração de de motores e de carros
Thank you very much
Excellent fix thanks
Un saludo afectuoso,para los mejores mecánicos que hay en CZcams...desde CHILE Bendiciones
Thank you very much. Please follow and support us!
Parabéns!!Seu trabalho é simplesmente maravilhoso.
Thank you very much my friend
New ball bearing monted with hamer, good job!
An old machine perfectly restored and working well! Congratulations ! It's great I'd like to see more videos like this !!
Thank you very much. We will try to perfect more products.
❤
❤❤😂😅
This definitely NOT a perfect restoration!!!
Restauração perfeita coisa nenhum. Muita porrada nos rolamentos novos, parafusos enferrujados e por aí vai
Very good🎉
Brasil
I wish I could be a excellent mechanical engineer like this guys, so mesmerizing” and learning from watching it, amazing ❤😊
Thank you very much. Please follow and support us!
@@restorationsskills4967 surely I will 😊😇
Luar biasa lestorasinya berjalan dgn lancar ,top markotop
Thank you very much. Please follow and support us!
Gostei pela restauração parabéns!!
Thank you very much. Wishing you good health. Please follow and support us!
Very good video, I really like it ❤❤❤
Thank you so much
Beautifull
Thank you very much . Please always follow and support us!
Two thumbs up great job.
Thank you very much. Please follow and support us!
The work was fantastic and your channel is great.
The only caution with this compressor would be the pressure relief valves.
Thank you very much. Wishing you and your loved ones good health
Nice Job.
Thank you very much. Wishing you and your loved ones good health
Using the old bearing to beat in the new one is a good way to go sometimes.
Thank you. That's a good idea too
GREAT ❤️ JOB MY FRIEND *****
Very nicely done.
Thank you very much
YOU MEN AMAZING WORKERS *****
Thank you very much. Please follow and support us!
Para fazer uma reforma dessas tem que ter bom conhecimento de mecânica.
Thank you very much . Please always follow and support us!
Skill luar biasa
Thank you very much. Please follow and support us!
gostei do compressor belo motor gostei passeiro tamo junto valeu
Thank you
Inpresionante el soldador de metal untrabajo muy bueno 😊
Thank you very much.
трясётся как меркель.🤣🤣
Classic job done
Thank you very much. Please follow and support us!
Invest in a press so you don't have to beat up the bearings with a hammer.
We are also planning that. Thank you
Parabens pelo bom trabalho!
Thank you very much . Please always follow and support us!
Cylinder sleeves on well used air compressors(or ones sitting out in the weather for 25 years) are always the first to get worn(or rusted) and cause little air compression, maybe new rings on the pistons will hold for a few uses but not for long.Why not just get them bored out at a machine shop if you're going to all this trouble.
I call this guy the paint mechanic,make it look pretty and it fixes any piece of junk!!
Those poor bearings, that was painful to watch
Wo😮 that’s amazing
Belo trabalho passeiro parabéns gostei do vídeo passeiro tamo junto valeu
Thank you very much. Please follow and support us!
Состояние цилиндров не мешало бы оценить с помощью микрометра, похоже компрессор имеет сниженную производительность. Спасибо за интересный ролик!
Thank you for your feedback so we can improve future products. Wishing you good health
какой микрометр, вы чего? Они подшипники молотком забивают, куда им микрометр... Если бы я так работал, меня бы пристрелили давно...
Восстановить такой агрегат что бы накачать колёса. Простым насосом не пробовали?
it can be used for quite a few things. because its capacity is quite large. we just resurrected it
did you flush the tanks out
Podrian haber cambiado el manometro...
Are not . We found it near the machine
Just a suggestion get a dead blow hammer with a lead or copper head for pounding in the race ball bearings. Pipe of a similar size to the shaft is better than a driver. When you assemble the pistons you were putting in the gudgeon pins while the piston was contacting the steel bench. Take more care and you will get more respect.
Thank you for your feedback so we can better improve future products. Wishing you and your loved ones good health!
I nearly cried watching those bearings smashed in like that.
That is the prettiest boat anchor I have ever seen. Please remove oil and fuel befor useing.
Thank you very much. Please follow and support us!
Nakarrara takachima😊
He didn't wash the grinding paste off after grinding the valves. Big error. Also big huge error beating ball bearings in with a big steel hammer. Set the valves by pulling them open to see if gapped. No, that takes a feeler guage.
Thank you for your feedback so we can improve future products. Wishing you good health
Muito bom.
Somente sugestões::
Não se bate diretamente em rolamentos.
Brunir camisas dos cilindros motor e compressor...
Usar óleo para montar as peças pistões e cilindros.
E pra finalizar nas conexões flangeadas das tubulações de ar não se usa fita veda rosca, não tem nenhum efeito.
Abraço
Thank you very much. Wishing you and your loved ones good health
😊😊
I have a question for you. What is the name of the spray you use on those persistent old rusty nuts and bolts that refuse to come loose? I've seen you use it in many other videos.
That is Selleys RP7 anti-rust and lubricant spray bottle made in Australia
Great clean up and reassemble job, but c’mon guys. That’s a full workshop compressor, surely you could have run some heavier hose and a one inch impact on a few huge rusted truck lug nuts to give it a workout?! It’s a little big to be using to fill up tires or soccer balls isn’t it? I’ll give you one 👍🏼 for the restoration, but you’d have to prove it’s worth for the other one😉
Thank you very much . Please always follow and support us!
зайдёт для тех кто нихрена не понимает !у всех практически резьбовых соединений от стояния на улице во влажной среде ( а это явно не дубаи )появляется ржавчина ! и кстати давление в топливных магистралях не держится вечно !да много чего !просто тупо потеря своего времени !
Молотком по обойме может у них и принято, но это не хорошо. Кольца когда одевает царапает поршень, похоже культура ремонта им неизвестное понятие😊
Thank you for your feedback so we can improve future products. Wishing you good health
13:26 Was this crack due to water freezing in it and expanding?
Thank you very much for your comments. It had been neglected for quite a while and over time it had expanded
@ 23:08 That was a sad way to install the bearings.
Inspite of the negative comments. I think .they did a great job! The parts they're hammering on are way tougher than you think.
Thank you very much . Please always follow and support us!
I qw w@@restorationsskills4967
Pior que 5 moro,de lona é muito caro.
Why don't use paint stripper instead of wasting electricity??
We will try to improve the product further.
Son espertos en lo que les gusta
Thank you very much.
Esto es nada mas desarmarlo lavarlo pintarlo y volverlo a a armar cual restauracion
Chlapy super práce.
Thank you very much
very nice videos !
Thank you very much . Please always follow and support us!
No es la manera de poner los rodamientos, como los puso no va durar mucho tiempo.
once again great job i enjoy your work
Thank you very much
Are you going to upgrade the better wheels and axles later
Yes. We will upgrade them so they work and move better
Waduh parah bearing main gedor aja,ya rusak duluan 😁
Good stuff but hammers and bearings is not a great mixture
У них все это просто на улице валяется?
Master Chief mechanic 🎉
Thank you very much . Please always follow and support us!
Nimeipenda sana hii video ❤
Thank you very much. Please follow and support us!
Don't worry broo!! Pamoja💪💪
Estes vídeos são feitos em qual país?
Ráp xì ron bình nước rồi.
Belíssimo trabalho 👏🏼👏🏼👏🏼👏🏼🇧🇷
Thank you very much . Please always follow and support us!
serviço porco
Pls my machine consumes engine oil daily and it's still new but looses alot of oil on crunksharf breather
When he is a master mechanic,the first thing he have to do is going to a real master Who know how to used his tools
Thank you very much . Please always follow and support us!
What a pleasure ❤ too watch a skilled tradesmen work!😂
Saludos de Venezuela Edo Trujillo 🇻🇪👏👍 excelente trabajo exitos cada día más hermano tremendo trabajo lo del complesor de aire excelente exitos
Thank you very much. Please follow and support us!
I
The sledge has a name. Planned Obsolescence
So I haven't watched the video yet but I know it's gonna run, Because it's not made of plastic😮
Di akhir video angin tidak bisa ngisi penuh karena terbuang kembali sekedar saran lebih baik di kasih tambahan check valve untuk mencegah angin keluar kembali melalui kop hisap
Thank you for your feedback so we can improve future products. Wishing you good health
тут и так всё работало дизеля они не убиваемы,разобрать помыть в розовый цвет покрасить,пакистанский ремонт.
Thank you for your feedback so we can better improve future products. Wishing you and your loved ones good health!
Я смотрю, они там совсем незнакомы с таким понятием, как сбор металлолома!!!!
это не ремонт, а некачественная переборка с покраской😂😂😂. гнать таких ремонтников надо
Nice
Thank you very much. Please follow and support us!
The guy needs to go a little more easier on the coffee before he starts welding.😂
Thank you very much . Please always follow and support us!
Good job ❤❤❤
Thank you very much. Please follow and support us!
@@restorationsskills4967 👍👍👍🥰🥰
👍🙂🚜🚚
凄いけど、ベアリングをあんな感じで叩いて大丈夫なのかな？
Thank you very much. it still works very well
Only on the last job he used the plyer the right way.
👍👍👍👏👏👏