Hi, I'm Steve, nonda's lead mechanic engineer. Feel free to leave your comments here if you have any mechanic questions, I will be glad to help you out!
I have an 08 suburban with this code. Light goes away when gas is on E and stays off for a day or so after filling my tank. Then appears again. Gas cap? Bad gas?
I installed a new 02 sensor in the bank 1 sensor 2 in my 2008 chevy malibu 2.4L. But Still getting a code. The wire on the sensor was severely damaged and shorted the 10amp fuse. I replaced the fuse and sensor. But still showing the P2270 and P0140. I even installed a new factory exhaust manifold to. The old one was totally cracked open
Any chance this page is still active? I’m having this issue currently with me ford explorer and would love some info/tips 😢 have been to mechanic multiple times now
@@nondainc No I'm running K tuner so it only happens when I flash the tune so I flashed back to factory & it hasn't come on since, so I'm wondering is it the tune itself
Hi Kam, if the suggestion in the video has been applied and the issue still persist, we recommend having your vehicle visually checked by your local mechanic for further diagnostic.
Dont use gas for lubricant its good for fuel and the best cleaner ever. Most exhaust leaks come from the manifolds im not even watching the rest of the video terrible advice
![How to Fix P2272 Engine Code in 5 Minutes [4 DIY Methods / Only $8.34]](http://i.ytimg.com/vi/HhtqkmG2iqA/mqdefault.jpg)
![How to Fix P0017 Engine Code in 6 Minutes [4 DIY Methods / Only $6.81]](http://i.ytimg.com/vi/Vcj-f_J2hyo/mqdefault.jpg)
Hi, I'm Steve, nonda's lead mechanic engineer.
Feel free to leave your comments here if you have any mechanic questions, I will be glad to help you out!
What about a vw jetta hybride mk6 2013 model with the same message?
Yes, the information provided in the video is applicable.
I have an 08 suburban with this code. Light goes away when gas is on E and stays off for a day or so after filling my tank. Then appears again. Gas cap? Bad gas?
Hello, kindly check the fuel injectors if leaking, and try cleaning the MAF sensor.
I installed a new 02 sensor in the bank 1 sensor 2 in my 2008 chevy malibu 2.4L. But Still getting a code. The wire on the sensor was severely damaged and shorted the 10amp fuse. I replaced the fuse and sensor. But still showing the P2270 and P0140. I even installed a new factory exhaust manifold to. The old one was totally cracked open
Hi Tommy, kindly check if there is an exhaust leak. Repair the leak, and see if the issue will still persist.
Any chance this page is still active? I’m having this issue currently with me ford explorer and would love some info/tips 😢 have been to mechanic multiple times now
I have a 2013 suburban will it work.
Yes.
I have high flow catalytics converters installed with a down pipe that has a defouler on it but I'm running a code of p2270 how do I get rid of it
Hello, have you checked if you're having a leaking fuel injector or MAF/Oxygen Sensor issues?
@@nondainc No I'm running K tuner so it only happens when I flash the tune so I flashed back to factory & it hasn't come on since, so I'm wondering is it the tune itself
I drive a 2010 Chevy Cobalt could this work?
Hi Kam, if the suggestion in the video has been applied and the issue still persist, we recommend having your vehicle visually checked by your local mechanic for further diagnostic.
Dont use gas for lubricant its good for fuel and the best cleaner ever. Most exhaust leaks come from the manifolds im not even watching the rest of the video terrible advice