Building a DIY Wide Body Kit for my Mid Engine 67 Ford Mustang Fastback
Vložit
- čas přidán 5. 10. 2022
- In todays episode were building a wide body kit for the 67 ford mustang!
Get a 60-day free trial at shipstation.com/bisforbuild. Thanks to ShipStation for sponsoring the show!
❱ Shop - bisforbuild.com/
❱ Patreon - www.patreon.com/user?u=3364742
❱ Facebook - / bisforbuild
❱ Instagram - / bisforbuild
❱ Twitch - / bisforbuild
Music:
Fareoh - Cloud Ten - Auta a dopravní prostředky
That catch on the design and the change is genius. I envy people who have an eye for that stuff. My brain just sees all the gaps filled with tape and is like "Done! It's wide bodied now!" but you made the character of the car speak through those fenders so much more. Bravo
It's TTC! I love when I catch my favorite channels watch one another.
@@DankoleClouds didnt expect to see TTC here. love em. they do so much good testing
I agree. It’s gonna be a show stopper!
whoa worlds collide, nice to see ya here
I remember him catching something like that on one of the Lamborghini builds. His eye for design is incredible..
I do custom composite work like this. A great trick is put aluminum foil over the tape, and you can remove the whole under structure. Works like a reverse plug. Love the build!!
That's a fantastic tip actually!
Why not just spray it with mould release?
@@rallycsx the tape isn’t a perfectly flat, non porous, so the pva won’t coat everything. If you run foil, you can flatten it out and the resin doesn’t stick.
Also, resin/fiberglass will not stick to clean plastic surface. On boat i often prepare a piece of fiber on a layer of plastic sheet before placing it in place on the boat with the plastic facing outside. Once it's cured the plastic sheet just peel away and you are left with a pretty clean/shiny fiberglass surface.
@Jbellz
Good idea , I used packing tape over the blue tape works great as well!
these blue tape timelapses were some of the most satisfying
buddy
ya like cars ?
THE GUY BECOMES COOLER DAY BY DAY
Holy shit High Boi?? Absolutely love ur stuff
Oh shit it's the High Boi
Lets go, High boi is also a Car boi
Dude what?! Why are u here?!😍
"As you can see it, it, it's not there..." 🤣🤣🤣🤣 That got me
Good call with the back fenders. Excited to see you pull this off!
This build, and the production quality of recent episodes is amazing. The tunes are on point, and I am loving Chris's energy output, positivity. Oscar, as per usual, is killing the fab work! This guys skills overall are seriously impressive. Would be good to see some film on the rest of your team and their contributions. You all kick a$$ !!!
I use a similar technique for widebodies/flares/sub boxes...except I stretch spandex over the skeleton and just brush the spandex with resin so it tightens and hardens before I lay the glass fibre down.
Again, Oscar did everything. You are the choreographer and money guy
I love the new plan to follow the rendering, looks so sick!
That's the coolest widebody Kit ive ever seen.
Fixing the rear that little bit made a WORLD of difference. Great eye for detail.
Looks incredible guys. Just one tip from a guy who built fiberglass Humvees for military training simulators. Spend a couple extra minutes with the brushes and pound those air bubbles out between laminations and the whole layup will be massively stronger. Also a quick scuff with 40-80 grit helps each layer bond to the previous. You guys can obviously make anything!
Bro.. I love this channel. The creativity, ingenuity and passion you guys display is infectious. I can not wait to see this build. Well done gentlemen!
This channel and the Mustang whose name shall never be mentioned got me through most of the COVID lock down!
Looking amazing guys... The body kit is looking like a 1972 corvette stingray
Front 1/4s are for sure
The angles of the front archs are giving me major 60's Stingray vibes, its an interesting look combining it with the Mustang.
Amazing work as always, really makes me want to try something like this myself!
This is outstanding. I wish I would have known about the aircraft material when I started my build on my '71 Mustang. I did use a lot of tape on the console build. A few of the guys at the military craft shop could not believe I used tape and cardboard to build it. Right now it is sitting under my carport gathering dust. I can't complete the build due to my back issue. You are breaking my heart seeing how you guys make it look so easy. Keep it going.
Hey just a FYI to help with crafting. If you spead some wax on a flat surface. When the wax dries you can lay a sheet of fiberglass on it with resin. When it dries you have flexible fiber sheets you can cut an shape by hand
6:10 now that's an insane view
I love when channels ACTUALLY go through the process, including the mishaps along the way. I am looking to do this to an Oldsmobile Cutlass Coupe that my dad gave me the remains of 😂
It’s amazing how quickly you guys knocked that out. And that method of structure…..brilliant!!
Your guys adjustment to the width of the rear
Was just what you needed 👌looks awesome
We need a longer video showing the glass fibre process in real time please 🙏🥳🤩👍🏼
Greetings from Germany🇩🇪, your videos are awesome.👍🏻
Love the afterthought change to the body kit! Made it look so much better, Great work!
100% agree on adding the width. It’s looking epic.
Your fab table kills me ahaha! With everything you have and a giant warehouse. You use a plastic folding table as a fab/welding table and some cheap tools! Such a bad ass build
Good call on the rear fenders. This is starting to look like the bat-mobile mustang. Way cool!
18:22 i just fell in love with that three-quarters look instantly! Looking good boys!
Hell yeah! It's looking really good so far.
These kind of projects are why I love this channel
You guys are awesome! This build is really coming together!
Insane! You guys are SO creative!! Unreal!
Y’all making hard work look easy!!
I thought it was the 70's quarter window that made the rendering look so much better than I could ever imagine a 67 body being but I'm starting to think a lot of it came down to that ledge you just added, it's IMMENSELY better, and more authentic. Very nicely done 🤗
Front fenders are giving me c3 corvette vibes and i love it!
Love these vids!!! Lee them coming! Thanks for the update on “B is for boat” can’t wait to watch this one!!!
Love the imagination you guys have building!!!! Looks like a jet !
Wow. The difference in the look of that thing just by lowering it!! Awesome
Automotive designer here. What you're doing with the tape and constructing the planes is actually similar to what we would normally do in Clay on the cars. The only downside I can see is that you're not able to get as much sculpture or crown in the surfaces. I would just give a little caution to letting the fenders have a negative curvature. Always try to be positive in fullness to look stronger. The Pull out of the belt to shoulder line was pretty cool! It's crazy to see the 3D steel lattice work; almost like you're 3D modelling in person.
great call on those rear fenders, they look great. u guys are kicking ass on that build !!!!!
I'm following you guys now for a pretty long time.. that been said I've never been more curious how this build and especially the wide body is going to look like when it's completed... you guys nailed it again!! Love this build
Great video, loved it!! I can't wait to see the rest of the build!
The car looks great 👍 looking forward to seeing it when it's finished.
It's been so awesome watching you learn how to do all this from scratch in just a few years.
👆👆Congratulations you’re shortlist among the winner today use the telegram handle above to DM…
Looking fantastic gang. Can't wait to see the finished product. It's going to be wild.
This tape method is genius! Really gets the gears turning in my mind for my Dodge Magnum project.
Mustang Stingray :D I think it would really be cool to integrate functional air intakes in the rear fenders, since this is a mid engine mustang.
Was just watching your truck episode ! Then this came along !
This thing is going to be awesome!! Love your work 👏👏
That was a great call and the top edge on the rear looking amazing keep trucking
The rear fender looks Much better after changing the line from the top!! Good job and good eye!
Great episode… loved that you were faithful to the design (even though it looked like a PITA to start again)!
I never really comment but man you and your team just amazes me with your knowledge and skills just always amazed and cant stop watching your builds
I know all about deadlines working in the classic car industry, but man I can't imagine trying to tackle a crazy build like this with that short deadline that you have. You are flat killing it though!
Love that you are trying this technique for fabricating the body again, it makes what seems to be a totally impossible task accessible with the application of familiar materials.
This body kit looks wild BTW. Good job boys.
It's awesome as a relatively new car guy to learn new things. Making my own body kit has always been a dream of mine but since I have never been building any kind of stuff on my own I do not yet have the intuition to figure out techniques like demonstrated on this video myself. Learning new shit is cool.
Heck yah ! This channel just gets better and better. You Videos are dope good sir. 👍
Loving this Wide Body Kit, it will be one of the best looking 67 mustangs out there! ✌😎
Dude, the flow of the plastic shrink is killer. The tape works, no doubt, just... it's so much work, and.. meh too late now.
Killer project. can't wait to see more.
So damn cool, can’t wait to see the finished product!
I just love watching Oscar doing what he does best, what a master fabricator
Love that you added the "Hips" on the car 👍🏻
Awesome the wide body, it gives a mean look to the Mustang 👍
Gotta use a roller dipped in acetone to get those bubbles out of the fiberglass. It will much stronger and save you days of bodywork. Available at any composite shop.
Very cool project, keep after it!
^^THIS^^!!!😊
Yes!!!! Thumbnail looks amazing!😎
Awesome concept, love you cut the 1/4s to widen them first, looks 1,000,000x better. Good luck!
That was educational to see and get a basic understanding of how a widebody is made
Moving that main body line made this project imo 💚
🤩 damn that’s some project Chris, I’m really looking forward to seeing how you create the body kit as I have bumpers that I’d like to create 👌🏻
Can't wait to see it when it's done, hopefully I see it cruising around the mean streets of Portland!
Great job on the widebody and that wider hip thing you did was the right move
Scam
Thank u for showing this wow this going to be really nice
Good call on the rear hips. Widening that body line makes a huge difference.
That is so badass! You guys make that look so easy makes me wanna do some crazy stuff like that to my car!! Lol!! Great job!!
i was skeptical on the “hips” widening until i saw the original design next to the widened version, that looks 10x better good stuff dude. can’t wait to see the final productttt
Damnit man, You put ideas in my head and motivate me to try and do what you guys do. I already have enough projects but guess i will have to start another one, Thank you gentlemen and excellent work
Loving this Stang! Grate job!
Scam
THIS BUILD drew Me in!😍
Frickin' Awesome!
@@tombeebe7215 it's a scam. Don't.
This build is awesome 👏
You guys are crazy. Thank you!
Pumped to see y'all found one local for cheap, that's best-case for sure!
huge fan from brazil ,been following channel since the GTR and you guys make the best projetcs .. PEACE!
You going the extra mile, looks fantastic and it is so worth👍😁😁👍👍👍
Best episode by far! Can't wait for the next one.
Scam
I want to make an all metal wide body-ish kit for a 4th gen 4runner and the skeleton that you made gave me some great ideas for a template.
I'm lovin' this build.
Literally building my dream car, amazing
Awesome stuff!!
The Mustang is coming along prudently can't wait to see it finished and then see you drive the Beast lol
So dope!!! Great work.
Good call on the rear fender body line.
Good job guys you are doing great work it's very fun to watch
It might help with the fabric to use an iron instead of the heat gun. You make several passes at increasing temps. It would help to be able to control the shrinking of the fabric a little more. That is how they do it in aviation at least.
Crazy work
I have some cool design ideas For the next project
B is for Oscar.... impressive fabrication as always 👏
This is my 1st comment on CZcams ever and it's because you said what you said about widening the hips on the Mustang That's why I watch this channel So no matter what the result its still gonna look d*** good
It looks really good, man.
Loving this build just like all before it. Gotta say though, I quite like the concave shape to the arches. Looks more complex and fluid and adds a little 911 flare!
I agree. I liked the concave look even if it was just muted down a little
Outstanding sir!
Thank you im so exited to see the end 😍