iPhone SE 2020 with No Touch & 3 Min Restart: DO THIS to Permanently Fix It
Vložit
- čas přidán 11. 09. 2024
- Here is my latest method for repairing an iPhone SE 2020 with No Touch and/or 3 Min Restart. We use 3 long jumpers to solve the "Missing Sensors: Mic1" issue.
🚨 Do you need your iPhone or iPad repaired? Send me a message for a quote: www.vccboardre...
The touch jumper requires you to scrape out the traces next to the SIM slot.
The 2 mic1 lines go to resistors on the side of the CPU.
This makes it really easy to run all 3 jumpers & guarantee it’s not going to come back under warranty later.
Read more about it here
✨ iPhone SE 2020 Latest Solution: vccboardrepair...
Make sure you review the panic logs if your iPhone SE 2020 is restarting
🎥 • What Is Causing Your i...
Past videos on this subject
🎥 • How To Fix an iPhone S...
📹 • The NEW Touch Disease....
Aixun T3B Soldering Iron Station:
🎥 • UNDER $150 Soldering I...
🛒 JBC Conical Tip: amzn.to/3rPkZZB
Here are some of the tools used in today’s video:
🛒 Polarizer Microscope Light: s.click.aliexp...
🛒 Insulated 0.02mm Jumper Wire: amzn.to/3piIFCT
🛒 2uul UV Mask: www.mobilesent...
🛒 2uul 3D Tweezers: www.injuredgad...
🛒 Best Scalpel Blades: www.mobilesent...
Let me know how you have been doing the jumper solutions for iPhone SE 2nd Gen with No Touch or Random Restarting.
🚨 Support the channel by checking out these links🚨
🧾Find & contribute to repair solutions to the Repair Wiki: repair.wiki/w/...
🏆Become a member of my new Private Community of VIP Techs: vccboardrepair...
👨🎓 Want to join our 90-Day Microsoldering Mentorship Program? Click here: vccboardrepair...
🔥 Full list of tools I recommend: www.vccboardre...
►Check out my new T-Shirts, Hoodies & more: merch.vccboard...
►Amazon Storefront: www.amazon.com...
►Join the new Facebook Group for Repair Techs vccboardrepair...
🛒Buy The Seek Stand by VCC Board Repairs here: vccboardrepair...
🕶 Buy Macro Lens here: www.vccboardre...
📸Buy The Seek Compact Pro here: amzn.to/34I4whX
🚀Today's shirt can be purchased here: merch.vccboard...
▶ Follow us on TikTok: / vcc_board_repairs
► Like us on Facebook: / vccboardrepairs
► Follow us on Instagram: / vcc_board_repairs
⚠ B2B & Wholesale pricing for mail in repairs is available for repair shops in the USA. Contact us for more information: www.vccboardre...
Please note: This page contains affiliate links. If you choose to make a purchase after clicking a link, I may receive a commission at no additional cost to you. Thank you for your support!
#Microsoldering #iPhoneRepair #DataRecovery
What up Sensei! Doing this tonight and watching your video to get my confidence right.
You got this! 🙌
Only this channel brings this kind of deep informations.
Thank you!
I’ve always had the flux oozing problem. What I do it buy the 30g and I fill smaller syringe and that helps. What I use to do was after pressing the plunger is pull it back slightly and you will see the flux go back in. Hope that helps.
Yeah, I've had to pull back the plunger now. But sometimes, I'm in a rush or not paying attention & forget... then next thing i know, it's all oozing out 😂
Thx mate, i had same problem, all 3 lines are broken. Keep up with great work! 🍻
Haha nice! Glad you solved it!
Hi my phone is messing up just like this second generation SE and I just want to get enough touch to be able to upload my voice memos. Is there any way you think i can press the back of the phone or sim card area in order to temporarily fix this problem?
I don't read the title just tap on notification when I'm lucky to see it before the show is over
Makes sense! Thanks for joining the live chat!
so is this a common issue for this model? similar to iphone 7 plus audio ic, that when the board bends or gets dropped hard this happens?
Yes it's a common issue. It's a board defect
Great Video thank you
Thank you! Appreciate the support!
Great Job.👌
good job thank you for ur hard work
Thank you too!
Hello what solder paste do you use for iPhone 12 & 13 series sandwich boards
Same paste I use as other models.
G lon 148C
Good job
I really appreciate your support. Thank you so much
Teşekkür ederim sorun çözüldü
Thank you! Appreciate the support!
Videodaki işlemleri yaparak mı çözdünüz sorunu yoksa anakart değişimi mi? Siz yaptıysanız size nasıl ulaşabilirim acaba
Hey there, is there a way to get the Macro lens in Europe? Because shipping is 35$, which is quiete a lot! But i really want one, because i think its a great product!
Yes, you can buy from UK reseller: www.replacebase.co.uk/tools-equipment/equitment/equip-thermal-cameras/camera-adapter-lens-for-seek-thermal-compactpro
@@VCCBoardRepairs Is this the exact same product from you guys?
@@VCCBoardRepairs And do you have a personal dicsount code for me ;)?
Yes, this is my product
They also sell my seek stand too!
And no, there's no coupon codes
@@VCCBoardRepairs Thank you very much for the quick reply!
What if i'm getting 0,330 on I2C1_AP_SDA?
yes, that's technically normal reading. But you should run the jumper regardless
@@VCCBoardRepairs Thanks for the reply, will do!
IPhone could have guessed.
Yes, iPhone.
Great job!!…🔥🔥🔥
Thanks 🔥