I actually just bought this same one for $102 on Amazon that comes with an extension tube to move the camera higher, for coins and such. Thank you for the review though. I get to see it in action, before it gets here. The tube by itself is $15 , by the way :)
When you did your other videos with closeups, what gear were you using (Specifically for the motherboard bent pin repair)? Like your vids by the way, very helpful.
I decided to pick your newest video for a question. I have a pair of Dayton audio plate amplifiers, that I used in a custom build for my home audio. I bought some 8in drivers that were allegedly rated at 4 Ohms. After about a week of listening to my sound system at relatively low volume I started to smell a very stinky smell. The plate amplifiers led still lights up. And the fuse is still good. I then decided to check the actual rating with my digital multimeter on the 8in driver and it showed to be 1.3 ohms and not 4 ohms that it was rated for. Where do you recommend looking to diagnose for a proper repair? I could send it in .. but at the cost of repair ...I'm sure would be the same cost as buying a new plate amplifier. So I'd like to attempt this myself.
hello, my moysuwe digital microscope screen will no longer show the coin images. Can you please help me? It only shows like an infrared screen or should it be in a certain mode
It's been a hot minute. Have you ever looked in to used billboard material for a car cover? I know you had many issues with even the good quality ones.
Thanks for this review. Happy to see you here again. Keep it on going :)
Thank you for the support.. I will try.
I actually just bought this same one for $102 on Amazon that comes with an extension tube to move the camera higher, for coins and such. Thank you for the review though. I get to see it in action, before it gets here. The tube by itself is $15 , by the way :)
you need to add the extension to get the full coin in view
When you did your other videos with closeups, what gear were you using (Specifically for the motherboard bent pin repair)? Like your vids by the way, very helpful.
I decided to pick your newest video for a question.
I have a pair of Dayton audio plate amplifiers, that I used in a custom build for my home audio.
I bought some 8in drivers that were allegedly rated at 4 Ohms.
After about a week of listening to my sound system at relatively low volume I started to smell a very stinky smell.
The plate amplifiers led still lights up. And the fuse is still good.
I then decided to check the actual rating with my digital multimeter on the 8in driver and it showed to be 1.3 ohms and not 4 ohms that it was rated for.
Where do you recommend looking to diagnose for a proper repair?
I could send it in .. but at the cost of repair ...I'm sure would be the same cost as buying a new plate amplifier. So I'd like to attempt this myself.
If you use the 6 inch extender that came with your microscope you will get the whole coin and more in the same picture !!!
hello, my moysuwe digital microscope screen will no longer show the coin images. Can you please help me? It only shows like an infrared screen or should it be in a certain mode
Mine froze on me
Where the hell have you been ? Did you ever fix that wall LOL
I actually did. It's all fixed.
It's been a hot minute. Have you ever looked in to used billboard material for a car cover? I know you had many issues with even the good quality ones.