Egress Windows For Fire Safety | What Are They? Where Are They Needed?
Vložit
- čas přidán 8. 12. 2022
- Looking for a window company in your area? jeffslist.com/
Egress windows are required in homes so you can safely escape if a fire occurs. Because of this, it's essential that you know what they are and where they're needed.
houstonwindowexperts.com/
Temper Code: • Tempered Windows | Do ...
Seven Ways To Save: • Seven Ways To Save Mon...
#HoustonWindowExperts
#Remodeling
#BuildingCode - Jak na to + styl
Thank you Jeff for introducing me to Anlin Windows. After looking at so many manufacturers, we're going with Anlin. They make a well-built, quality vinyl window with lots of color choices.
You're welcome! It's s great window.
My daughter is renting a room while working at a local hospital- her mattress against the wall of the basement window …we were thinking of a pool ladder hinged to the wall and a dog key with rope on the other side of the window. A 5Ft ladder wouldn’t fit in the room. We even considered a rope ladder from the ceiling. Thank you for this video I really appreciate it! We just don’t want to order things we don’t need
All the best to you. It sounds like you need a creative solution in your case.
FiberFrame something new you just started carrying? The closest dealer is too far away from me, but Marvin and Pella are the only options I've found for fiberglass windows around here, and unfortunately JeffsList doesn't have anybody for my area, either. I'm definitely looking to go fiberglass for my climate, probably/hopefully going to be replacing my windows and sliding glass door next year.
Yes, they are not Nationwide like many other brands are. They make a really good product and it's too bad you can't get it where you are. I would suggest the Pella Impervia in your case.
Jeff,
Thanks for all your videos - I have learned a lot and still learning
Do you have a recommendation window company in the greater Cincinnati area?
Thanks again for videos
I think we do. Please check out JeffsList.com to see if we have anybody near you.
No clear opening that doesn’t mean double hung
Please explain..
If the support joist are perpendicular to the window that I’m enlarging generally a steel structural window do I need both a header and a temporary support wall ?
Anytime you are removing framing that has a load on it, you need temporary support.
What if it’s a smaller window like 30x36 casement or 40x42 slider
I don't think I've ever seen a window that was load bearing. However, if it is, you've got a problem if you remove it.
Hi Jeff, I was wondering if you could help me?
We just added a full shed dormer to our second floor cape cod. Our boroughs codes meant that we would have to install an egress window. We purchased two 3'x5' specifically marked tempered egress windows. The inspector is failing them repeatedly. My contractor as well as the window company stands by their product 100%. We are also in agreement because there's something odd about the way he measures that puts our windows at 5.3 sqft when the manufactor, contractor and us do our math separately all come to 5.7. He measures from the inner most part of the frame width wise. Making the opening a good 1.5 inches shorter then if he measured the clear opening on the face when he took the height. I hope that makes sense?? I'd really appreciate it if you could let me know if there's a specific way to measure?
As much as I like to think I am an expert, I'm not sure what the exact rules are regarding the location of the measurement.
I would assume that they are probably measuring from the smallest portion of the clear opening. Obviously, that would be the restriction if you were trying to fit a 5.7 ft item through the opening. Look for the smallest part of the opening, and measure from there. If you're larger than that, then this guy doesn't know what he's talking about.
@Houston Window Experts you're awesome, thanks so much for the quick response and explanation!
You're welcome. I hope this helps.
I was hoping to see windows. 7:10 and we’re still talking about regulations
I'm sorry to disappoint you.. this video was about regulations regarding egress, not a specific window.
I have over 200 other videos to choose from that offer window specific topics. Please take a look around.
What if the original window (old home) you are replacing doesn’t meet todays code and you replace it with the same size/ style? Is that allowed?
I have seen language in some ordinances that say it's ok as long as it's an existing opening and you aren't changing the operational style. If you are adding a new opening or reframing an existing opening, you must meet the current requirements. But I would advise you to check with your city inspections department or window installer.
My house was built in 1978 and some of my existing windows fall short of the area requirement. I'm having to convert some windows from oriel to equal sized sashes and even then they will just barely meet the area requirement. A lot of homes in my area have had to do the same. But I haven't seen any enlarge an opening just to comply with it, that would be very expensive.
One thing you may pay attention to is the width of the profiles on the windows, as the window you choose can affect the egress area based on the frame thickness. Many manufactures have size charts available on their websites for their standard sizes showing which ones meet egress. You may also find section drawings on their websites from which you may be able to estimate the egress area, if you're good at reading drawings. That would usually be found in the architects/professional section of their website.
Thank you for sharing this information. You are correct.
Hi, im looking to purchase this new construction window 36x60 at lowe’s model 5208288… im getting mixed answers, would you know if this is egress?
That's too close to call without being sure. I would check with the manufacturer. They would never lie to you about this because this is a liability for them if they did.