CEN F450 How To Change Transmission To High Gear and Easily Remove The Wheels (ONLY 2 screws +Nut)

Pre-order then at Amain:
🔥🔥Galaxy Blue: bit.ly/CENF450Blue
🔥🔥Gray Titanium: bit.ly/CENF450GREY
Here's some quick tips on how to remove the CEN F-450 wheels and switch your transmission to the High Speed gearing. The wheel is a piece of cake and only requires you to remove 2 screws to remove the cap and get to the nut that holds on the wheel. It reveals a 12mm wheel hex that you can put a lot of different wheels on.
The transmission is more involved, but pretty straightforward. Hopefully this helps motivate you to switch it. Definitely get more speed in this setting.
Click to subscribe ⇨ bit.ly/Sub-CCxRC
SUPPORT THE CHANNEL:
The channel is supported by affiliate link that don't cost you any extra money, but does give me a percentage of the purchase price for directing traffic their way.
CCxRC Shirts and Merch ⇨ teespring.com/stores/ccxrc
Where I Buy RCs Online: Horizon Hobby ⇨ bit.ly/Horizon_Hobby
Amazon ⇨ amzn.to/2TMmmHT
Support Via Paypal ⇨ paypal.me/ccxrc
SEND US MAIL: I love getting stickers and other cool things you guys send. If you have something you are trying to send to CCxRC, you can do that here:
CCxRC
PO Box 16802
Chesapeake, VA 23328
----------------------------------
Connect with CCxRC
----------------------------------
Facebook ⇨ / ccxrc
Instagram ⇨ / ccxrc
Twitter ⇨ / ccxrc
-------------------------------------
Recommended RC Gear
-------------------------------------
Venom Pro Duo Charger: amzn.to/2GwQOhe
Venom Pro Quad Charger: amzn.to/2DNm9hN
Lipo Bags: amzn.to/2GsR2pt
Venom Pro LiPo Checker Multi Tool: amzn.to/2DYUg5u
----------------------------------------------
CCxRC CZcams QuickLinks
----------------------------------------------
Most Recent CCxRC Video ⇨ goo.gl/yrZZEk
Most Popular CCxRC Videos ⇨ goo.gl/HBoMqk
----------------------------------------------------------
Best CZcams Account Management
----------------------------------------------------------
Tube Buddy ⇨ bit.ly/YT_TubeBuddy
----------------------------------------------
Disclosure
----------------------------------------------
The product shown in this video may have been sent to me for review. Regardless, I do not get paid to make the videos but many of the links contained in the description are affiliate links and I may benefit from a small commission if you purchase something using the links. It is my duty to you to provide you with my honest and unbiased opinion about the products that appear on this channel to help you make informed decisions. If you plan on making a purchase and want to support the channel using the links, I thank you in advance. I look forward to making more great reviews for you.

[@CCxRC]

Pre-order now available at Amain:
🔥🔥Galaxy Blue: bit.ly/CENF450Blue
🔥🔥Gray Titanium: bit.ly/CENF450GREY

[@thebigsho665]

Get mine 3-16-21 I went with the blue I've never even seen one up close or ever owned a cen product but I can tell you now I'll end up owning atleast 2 of these!!!Not only am I a ford fan but these trucks are versatile imma make a tow/hauling/pavement princess.Then a scale dragster brushless go fast scale basher!I'm glad it's got open diffs so you can control it!If your going to make a big ass crawler/mudder/snower then yes lock em!!!But if not you would have to be a moron to lock em!

[@sy55legrc]

Perfect thank you for this, going to sort mine out now

[@sirchirpalot]

Great vid Tony, I just got mine and i was wondering how to switch to high speed gearing, I'm surprised how easy it is.

[@CCxRC]

It is very simple. Gives more room for additional power buy changing the pinion at a later time

[@chucksmith155]

Thankyou Tony this is my come back to video on changing the gears I just got my second 450 and have changed other peoples gears for them thanks again for this video

[@bl_jacobs]

Thx for the tip when I get mine ima make it go insanely fast

[@theoneandonlyalford]

Was the pinion metal?

[@SwampersRC]

Great job on the demonstration!👍 That's a really cool feature they've built into this truck. The more I look at this truck the more I like it! (It's still tempting to see if they make the bodies and wheels available!) For $370 US it looks like a great deal! I would like to see it next to your TF2 for a scale comparison!

[@ReadySetRC]

Great video Tony! Very informative👍👍 Can't wait until I get mine.

[@andrewnoonechangethename614]

Unfortunately this doesn’t work on my motel the gere that the rod comes out of it dose not come out

[@vbspeed7571]

These r bad ass..rigsss..got the gray one

[@meefthepotatoe4363]

🤔 so new out the box it’s geared low ? so once this is done it’ll run faster ?

[@CCxRC]

Yes

[@jknewb6276]

Good morning Tony way off topic but i didn't really get to run her last night was a little dark. I'm only using a 3300 mah 50c 3s as of now. I should be running 5500 as you already know lol. I was worried about a grinding noise in the back when you push it. Pretty sure it's just the metal gears i popped off the cover and the gears are in line. Thanks Tony for being welcoming and helping out a Newb!! 😎🤘

[@CCxRC]

J&K Newb that’s normal with metal gears. They chatter when you push them 😀

[@jknewb6276]

@@CCxRC awesome brother i really appreciate the quick reply my man you rock!! Have a great day!! 😎

[@rodneystewart2691]

If you take it all apart make sure you put the mini gear on the output shaft above the pin

[@fords4life914]

Is that a 12mm hex?

[@bocefuss4500]

thanks for the link on pre-order! nobody mentioned what size wheels it's running need to know so i can shop around for different tires

[@CCxRC]

They are like 2.8” it’s not detailed on the specs and that’s my rough measurement

[@bocefuss4500]

@@CCxRC Thank you sir !

[@freaky_vro]

@@CCxRC hey man, so when I try to take off the spur gear thing it doesn’t loosen just turns even when I hold it

[@chrissmarduksrccarcarnage4940]

Nice...👍

[@ScarabChris]

I was wondering if the same could be accomplished by putting a slightly larger pinion gear on the motor. I have the truck. I don't need it to be super fast but I would like it a little faster on the pavement. But I don't want to lose the torque because I like to do some light off road running and I tow a 16 lbs RC boat on a big trailer. I wish there was a 2 speed (auto) trans. I know they exist but if anyone knows of one that will easily go into the CEN 450 please reply.

[@frederickbehn5610]

Can you put Tamiya diesel truck rims and tires on this truck, and give it a more stock looking Dually?

[@spoolyboi9434]

Would have been awesome if you were able to change gears with a servo and 3rd channel vs opening it up to do so, but very cool either way.

[@freaky_vro]

I need your help, the truck makes a whining noise and won’t move, I thought it was the gear but they look and move fine. Do I need a new motor? And it’s getting very hot almost Instantly, same with the wires

[@CoachD386]

Your thoughts on how do you think this will hold up with a brushless system in it?

[@CCxRC]

Transmission should be fine. Diffs may need the aluminum casing added. Not sure yet. Plan to find out though 😉 I’ve got the heavy duty diff gears and cases on standby.

[@CoachD386]

CCxRC that’s what we(gap, myself, mobay, etc.)want to see. I say it’s more the for the scale guys honestly, I’m looking at it as a hauler and also maybe testing some other waters with it. 😈

[@Ecobeastsoffroad]

What brand 1/4” bits are you using and what brand is that shock wrench?

[@CCxRC]

I'm using the Integy Hex bits: bit.ly/Integy_Hex_Set
MIP SPeed Tip Ball Hex : bit.ly/MIP_SpeedTip
Protek Shock Pliers bit.ly/Protek_ShockPliers

[@DavidMartinez-ju3eh]

That is cool

[@wootwootjr]

My driveshafts won't spin while attached to the motor after switching to high speed gearing, wheels are completely locked up. I'm not sure what I did wrong. My mesh isn't too tight, any looser and it starts to slip.

[@covermchone99]

Can you get a arrma kraton exb

[@CCxRC]

I have one. Haven’t opened it yet.

[@TazBeGaming]

Does anyone know when this truck goes up for sale for the public?

[@CCxRC]

it's up for Pre-order. SHould be out in Oct/Nov

[@TazBeGaming]

CCxRC Thanks, got one on preorder!

[@hollerboy9452]

@@TazBeGaming did u get urs yet

[@TazBeGaming]

@@hollerboy9452 yeah just before Christmas it’s a sweet truck

[@LuisOrtiz-ju7ot]

Where I can buy one of those?

[@migueltorres4736]

When I get mine I'm putting hydro's in it ..

[@LRCR]

That is a cool way to swap speed gears, do you know if the spur can be upgraded to metal? ✌️😎👍 HFLPRCing 🌟 RCF4L 😷 Stay Safe Tony

[@isiahanderson3001]

What is the name of that tool u have plz need one

[@paulclancy2404]

A drill 😆

[@paulclancy2404]

I think thats ryobi 6volt screwdriver

[@CCxRC]

Ryobi screwdriver with MIP bits (and I they bits, but they can be out of stock a lot)

[@paulclancy2404]

Those are good bits , I need to get , stupid bc buy set than still need the 3.0 I think one of them 🤔

[@mr.sinister1279]

Wow u think they could of made it much easier than taking all this shit apart!!

[@garrycraig1425]

Was the video ever in focus? OMG it was horrible to try and watch lol

[@Ikonzrc]

#28👍