Cnc laser engraving machine DIY

Buy Now : s.click.aliexpress.com/e/_DBh...
Buy Now : s.click.aliexpress.com/e/_DBh...
NOTE: this machine is send unassembled, we will send a download link instruction videos and software or we can send a link for download.
1.6-5.5w
these power laser better for engraving and cut thin materials, like 1-2mm plywood or balsa wood, if you want cut thicker wood or leather please choose bigger power.
15w
can cutting 3mm-4mm plywood in repeat cutting on smaller area, if cut over 40cm area we suggest less 2mm wood, it can engraving on FOAM PAPER,PAPER,BAMBOO,LETHER,FIBER,FELT,FABRIC,CARDBOARD,BALSA WOOD,STAINLESS STEEL, METAL WITH PAINT,
20w upgraded
can if cut on smaller area less 20cm 5-6mm plywood in repeat cutting noproblem, if cut area over 40cm suggest less 3mm, it can engraving on FOAM PAPER,PAPER,BAMBOO,LETHER,FIBER,FELT,FABRIC,CARDBOARD,BALSA WOOD, STAINLESS STEEL, METAL WITH PAINT,GLASS,CLEAR ACRYLIC.
3w-3.5w-5.5w
Wavelength:450nm
LD doide current:1-3a
power supply:12V DC
pmw three pinsfrequency:0v on,5v off
Lens focusable:Yes
Best focus distance:2.5-5cm
15w
Optical power output:6w
Input power:over 15w
Power supply: 12v 8.5a
Focused beam:from 0.1-10mm
Wave length:450NM
LD doide current input:3.5-4a
TTL frequency:0v on 5v off
Laser driver:power adjustable
Best focus distance:2.5-5cm
20w
Optical power output:7w
Input power:over 20w
Lens material: optical glass coated with high permeability film
Shell material: module copper, aluminum anode red shell
Working mode: continuous light output, long working hours
Laser wavelength: 445NM
Power supply interface: xh2.45-2p
Power supply current: 4a , 12v 8.5a power
Power control: PMW signal control and TTL
Cooling mode: forced air cooling
Light output form: dot adjustable focal length
best focus distance:2.5-5cm
30w
Optical power output:8w
Input power:over 30w
Lens material: optical glass coated with high permeability film
Shell material: module copper, aluminum anode red shell
Working mode: continuous light output, long working hours
Laser wavelength: 445NM
Power supply interface: xh2.45-2p
Power supply current: 4a , 12v 8.5a power
Power control: PMW signal control and TTL
Cooling mode: forced air cooling
Light output form: dot (adjustable focal length)
best focus distance:2.5-5cm
Z KIT ROUTER
IF YOU NEED Z KIT ROUTER PLS OPEN THE LINK BELOW ADD IN CART PAY WITH MACHINE TOGETHER, ROUTER PAY EXTRA.
Buy Now: s.click.aliexpress.com/e/_DBh...
Buy Now: s.click.aliexpress.com/e/_DBh...