Thermocure is non toxic, anything that came out of your engine is product of the iron oxides that dropped out, harmless to environment. Now any actual coolant is toxic, unless you use Sierra or Prestone Low Tox it's also safer for your cooling system as it does not become acidic like other coolants in 6 years or less, so if you spill some you don't need to worry about the implications it's base chemical is used in cosmetic products lol...... Oh yea Sierra, and LowTox Prestone is ok to use with aluminum engine parts....
Cleaning vinegar and distilled water also works well as a cooling system flush.
That stuff works great, I've used/suggested it many times.
You are tenacious.
Can you show how you replaced the two rear coolant T's that you mentioned at 13:08?
czcams.com/video/auLj97YR66s/video.html
Thermocure is non toxic, anything that came out of your engine is product of the iron oxides that dropped out, harmless to environment. Now any actual coolant is toxic, unless you use Sierra or Prestone Low Tox it's also safer for your cooling system as it does not become acidic like other coolants in 6 years or less, so if you spill some you don't need to worry about the implications it's base chemical is used in cosmetic products lol...... Oh yea Sierra, and LowTox Prestone is ok to use with aluminum engine parts....
@@blkcoupequattro great info, thank you!
Hey my hose have rust in them, is there a way to clean them out, im unable at this time to get the two hose.
Sure, you could remove the hoses and soak them in vinegar for 24 hours and then take a plastic bristle brush and scrub out the insides of them.
Not for nothing, if you change your coolant/antifreeze on time it would never break down like this and/or use water to top up!