LK flexible film Screen Protector installation video
Vložit
- čas přidán 2. 07. 2024
- Get hype! Best Deal now. We offer great deals up to 50% off, limited time super sale of various electric device accessories. You buy you earn. Shop now: bit.ly/3wCLTqp
Check out some secret sick deals► bit.ly/3wCsAxu
![LK [Flexible TPU] Screen Protector + [Alignment Tray] for Phone](http://i.ytimg.com/vi/8M1DhzfrTis/mqdefault.jpg)
![LK [Flexible TPU] Screen Protector + [Alignment Tray] for Phone](/img/tr.png)
Check out some secret sick offers ► lk-direct.com/limited-time-sale
PM us a meme on Facebook ► facebook.com/lkdirect88
E
Worked perfectly, the second time, messed up the first. Went on easily, with no air bubbles!! I got it because I just got a crack in my screen from dropping my phone, and now I don't feel it, thank goodness. Great product!
I can honestly say this is the best screen protector ive had for any phone ive ever had , wraps around the edges really well and doesnt lift and if you do it right you wont get any bubbles at all
Does the fingerprint scanner work correctly?
@@JaimeRamirez-gi9pv yes ive found it very responsive
I would have to agree here. It's my favorite brand and application style.
Got it done perfectly thanks to this video, very straight forward and clear. 👏👏👏
This caused me great stress 😂 Step 9 really was a pain. The hard plastic would not come off. I had to pull both sides up slightly then proceed. It worked but left me with some air bubbles in the middle. After a few hours the air bubbles disappeared. So far I like it and I hope it lasts.
How has it held up?
Wait , i think i misunderstood , we rob the bank after setp 7 or step 11 ?
idk what these people in the comments are complaining about. I watched the video once before applying the protector and then watched once again to do it and the screen protector is on very secure and no bubbles. Just follow the steps.
I watched the video many times before doing the installation and still had problems that had me messing up the first one. For all you folks that did it right with no problems, congrats. I feel that the video needs to add some clarification in steps 8 & 9. Address the fact that if you don't bend it back at a sharp angle. when removing tab 2 & 3, the piece that you are pushing off in steps 8 & 9 will not pop up and come off. Maybe it's just me, but I think discussing that would help people. Demo: easy-peasy Actual: cussing was involved.
Moto edge/edge+ first try
Premium case friendly. First try no bubbles no hair no dust. The tpu's back adhesive removes micro lint and dust immediately before setting film. Peel to suggested line to avoid a crease. Fast delivery. Full coverage on curved surfaces. Exactly what I expected. Thanks LK
I managed to put it on first try on my note 9, with the video it'z really easy to do! It's the only one on the 5 i bought that fit perfectly well
Got my phone in August 2019 and used this screen protector. It's been on since then and has been fantastic, I decided to change it today, mostly for fun but I figure there has to be some wear. Anyway, this system is brilliant, thank you!
Wow, I was very skeptical and not expecting the foil to stick to the edges of my P30 Pro but it really worked and the video wasn't only helpful, I'd call it essential to the correct application.
This is the THIRD foil I've tried with this phone. Wish I'd bought this one first. Ten Euro for a three pack is an unbelievable deal. Thank you!
Worked great for me! I have this screen protector on two phones now. I'm glad I watched the video, it makes more sense with the video than it did with just the instructions that came with it.
Thanks for the video! Very easy to follow.
Works great if you follow instructions! Mine came out perfect.Thanks!
Just got and did it straight away and the quality is very good real easy to and value for money is there aswell
Thank you this helped me
Glad I bought this protector. NY skinami protector kept peeling up on the s10 plus curved edge and the glass ones always left an oily looking spot in the middle.
I messed up a little the first one. Still was able to use it for over a year, though. My mistake was that I did not lift Tab 2 properly and went pass the Film starting line. Today I did the second one and it was perfect !!! Good screen protector, sensitive and lasts a long time. I use it with Otter Defender case without problems.
Great illustrations, simple and clear
Super Produkt, mit der Anleitung war es sehr einfach, das Schutzglas zu installieren, absolute Kaufempfehlung!
Whoever thought this design up is genius 😂 Once you get it down it's very satisfying lol! I just keep thinking back to all the times I had to use soapy water installation it was such a pain. 5 🌟 great job LK!
Like most, I f'd up the first one. Second one went perfectly. Luckily, this screen protector set was really cheap.
Same here lol
No blame yah 😄
Same
My first try was a failure…..
so i did it my way, the wet method, (Just like putting glass tint on your car). Much much better!
Great idea for an install. The whole point is your able to line it multiple times, as what is touching the phone isn't the protector yet.
Goes on so perfect I couldn't even tell it was there until I looked closely. LG G8 thinq. Highly recommend.
I will admit i did mess the first one up, I could not get rid of the bubbles only to find i did not let it take that layer of clear off 2:17 . After that it worked perfect . The little sticky pad you put on the desk !! I now use it to put behind my keyboard, it does not slip forward now . Double Win
Wow you saved me some confusion and headache after reading your comment! I didn't notice the film either!!!!
Perfect! Extremely easy to install. 👍I kept watching the video until I completely understood and followed it step by step. Highly recommended x
I love this screen protector it went on perfectly! It’s smooth as glass, but it’s so much better than a glass screen protector! Thank you so much for such great instructions!!
Iub
Do they stay this way? Is it like Hydrogel?
@@liavelgarat6263 It does. Mine lasted over a year before it got a bubble that would go not go back down. I just put a new one on with no trouble at all.
S, die ll
Directions are clear enough. I completed the installation process. It's good
Pretty easy. Thanks for the video!
got it for my s10 and its perfect. finger id works and case friendly and im guessing if it doesnt work with ur case just use the second one and cut off the edges with some scissors
Does fingerprint work with this protector?
@@elchente182 yeah I have it on my phone right now
Just got done. WARNING TO USERS: regarding the black foam block, when I removed the sticker off it and put it on my table, it was horribly difficult to take that sticky stuff off the table! I had to gently scrape it off the table (Table is of DuPont Corian) and use a product called Goo Gone to painstakingly remove the stuff from the table. You can manage without it; watch out!
The film is correctly installed with the camera and speaker openings aligned. However, there are about 30 air bubbles scattered under the screen protector, about 1 to 2 mm size each one. I guess I'll wait one day and if they don't disappear I'll have to use the second one in the pack of three that came in the box. Yes, I did use the squeegee the best I could.
I put mine on an aluminium stool in the bathroom (less dust in the air if it's humid, hence less bubbles!) and had no problems removing it.
But: The cutouts on my S10 screen protectors aren't 100% right, the camera one should be 0.5-1mm further to the left.
Oh
I ordered 3 privacy tempered glass protectors for my new 2 Samsung Galaxy s21 and for phone cameras on back . I got packaged it said for s21 Fe I know for a fact I didn't order the wrong model model number and to really make matters worse , the was a note saying I got flexible protective film instead. It also stated I might be wondering why they gave me this film instead of the tempered glass protectors I ordered
They gave me 3 reasons y 1. That soft film will support fingerprints unlock .and the tempered glass would fail.???
2
Something that it covered the black eges of screen n rainbow light will be seen witch would cause my eyes to fatigue.
3 nails keys n other objects will scratch tempered glass protectors and there film will repair it self in 24 hours . Is this True also the tempered glass protectors I ordered have fingerprints scanner support in the middle . I'm confused please help???
@@Juleru it fit my S10 perfectly
Works for the most part thanks!
Great screen protector and great video👌
Is not great
works without a doubt perfectly fine. good video as well.
You really have to line it up perfectly if you have a tight fitting case. I have one of those cases that has attachment for a car mount and my goodness. The edges keeps getting pushed out. My first protector was perfect spot on. The second one just could not keep its edges stuck. After attempting the 3rd i got it perfect again but definitely not "all case" friendly it require perfection or trimming.
Thanks for your video .
I was able to install my protector's screen on my s10plus
Thank you!
Big help
worked perfectly fine on my oneplus 7 pro
no bubbles or anything
would recommend this screen protector
Directions unclear I got my ear stuck in-between phone and protector please help.
Ha, just your ear? I'd better not do this installation on my lap then, don't want you-know-what to get caught in there? 😂😂😂
Unclear? The video shows you what to exactly do, lol.
@@OnlineMD )
@@nickrom11 its called sarcasm. Get with the times lol
This happen often
June 2021 they do these quite differently (NO black bar! but a white piece you put into your phone to hold the plastic steady, but my phone of course still traveled, next time I'll put a few heavy books in it's place since those will be enough to keep it from moving as the black sticky did)and line 1 is MUCH Smaller, I can't say that's good because it was much harder to line up on my phone, though doable with a little patience). My tab 3 had fallen off, but I was able to work around that some, still it created quite a few bubbles. If they are still there in the morning I'll try again, or I learned eons ago a warm (NOT HOT) dryer takes care of those if it's a hard screen protector, these are cheap enough I do not mind playing with it, so long as I am very careful with the phone itself. I will say even with my issues, it still looks AMAZING with even the bubbles, again I am quite sure in the AM they'll be gone. TY TY TY for helping us. The concept in the 2021 package IS THE SAME here.
UPDATE: March 2022 its time for me to change it since it kept bubbling up, but still it lasted over a year!! Nicely done LK!! This time around it came with a black plastic to lay my phone on, which kept it nice and still. My bubbles this time is only 2 very small ones. Very happy with it.
So easy to fit just got mine today good protectors
I received this protector as a gift. I had to watch it 2X, but very easy to install.
these are great screen protectors, but I wish they were a tiny bit shorter on top and bottom. With an otter box case it makes the screen protector lift immediately unless you trim the screen protector while placing it. Had this issue with multiple phones, two note 20 ultras, two s10+'s, and an s9+. you have to trim them if you use otter box
Great illustrations simple and easy to understand
Great product, film screen protector lasted over a year on my S10plus. Just applied another one no issues what so ever easy install.
The video is very helpful. MUST WATCH! On step 8: you must lift the top covering sheet to " Film starting line" before using squeegee to push forward. It's easier to push forward not back at you.
this the best screen protector. i use 3 in 2 years. it's great.
The best and you went through 3 in 2 years!! Which one is actually the worst one according to you ??
@@PLATFORMHD yes they very good but after while getting too dirty and less sticky.
This was so helpful! My screen ended up only having 1 tiny bubble but that was actually my fault right at the end and it's really inconsequential to me overall. So grateful to have my screen protected fully again. It's like having a brand new phone :)
Best protector ever
Really helpful installation video! Step 10 is where I had a little trouble, had to re-watch it a few times. Basically you have to "feel" the screen protector covering being ready to slide out like it does in the video. It worked just fine on step 9 going towards the top, but Step 10 was a little trickier. After a few minutes I had the "ah ha!" moment, and I'm really happy with the installation. Just be patient and you'll get it done. Once you figure it out, you'll be like duh!
nice product however im glad they include 3 in the package the first 2 i trashed during install. got it on the 3rd try
#me2
Video is a great guide for galaxy s10+ apart from the little piece of dust I got stuck next to the Bixby button, all is well. Advice.. take your time. Watch the video a few times until you feel confident enough and then watch again while installing
I’m sorry but this wasn’t clear for me
Works well, great instructions. Thank you.
Took me a while to get it, I wasted one screen protector but then I got it right and it worked very well
not the most intuitive but if you get it right on the first try it does its job
Im done with buying protective screens now.
i love this protection its better than other protection
great video! I love these scree protectors for my galaxy s10plus case. they fit perfectly with the supcase unicorn beettle cases I use! don't see to interfere with the in screen finger print reader either!
Work the fingerprint whit this protector?
One of the best screen protectors made! Just took one of from about a year of use, still in good shape just decided I have a few more so might as well put a fresh one, great product if you install correctly
How it keep bubbling up and I can se the middle line
(Edit) the screen protector I followed this and the middle sections just won’t work and you can see it which is bad
WOW! This was so helpful, I got it on correctly with no bubbles on the first try! Usually I go through all 3 before just dealing with a couple bubbles haha- Thank you so much!!!
I tried putting this screen protector on my phone and even though I made sure to do all of the steps right it wouldn't stick to the curved edges of my phone
Same for me
Same for me.
Try adding heat like a blow dryer
Then there is definitely something you didn't do right. People often think they did all the steps right off videos like this but closely analyze every step with everything you did and im sure you will find one tiny thing different that makes a huge impact on the results.
Works just fine for me 👍😁
Amazing!
Your LG V60 ThinQ TPU screen protector is maybe just a fraction too large by half a mm. My corners tend to peel up.
The best screen guard ever...
Installation was easy and I didnt get any bubbles. I thought the tabs/layer design was pretty slick since you can line it up before you actually stick it to the phone. I noticed the foam block did have strong glue, but was lucky that it didnt leave any mark on my table. Now we shall see if it holds up with my case and my kids.
I really like this kit and the LK screen protector line. The S10 was super easy and I just did this on my daughters S8 with no issues. The only thing that sucked was the rubber bump stop is super sticky and it can peal up the surface its attached to, so be mindful of that.
Tried it multiple times on my S10 Edge and it just wont stick to the edges. Plus there is a line going through the middle. Thumbs down for me
Thanks.
Followed instructions and everything went just fine. Nice and easy. Samsung s10
The most relaxing, simple and professional video I've seen to date. The instructions were so clear and direct!!
Would be nice if the kit in the video was remotely close to the one they sent. Totally different.
Same. Missing a few well needed thg's that shld have came with the kit
This is so frustrating. The tabs break off when I try to peel them. The air bubbles come out at step 8, but my One Plus Pro is curved and the sticker doesn’t adhere to the sides. It seems the entire comment box has got it figured out, but it’s not working for me.
Edit: It turns out the green-edged stickers were upside-down; removing them would just expose the sticky side to the air. But there’s no sticky-side down because both sides are protected by film. So to remove the green-edged side - and actually get it to stick to the phone - you have to lift it, carefully pry it apart (because the tabs just break off) and then lay it down by hand. Result: dust and bubbles. To all the folks saying they got it right the first time, congrats, you did well in engineering.
Are these like Hydrogel protectors?
Warning! That black thing you're told to stick on your table leaves itself on your table when you pull it off. I did it on the kitchen work surface and even after lots of nail polish remover it's still a bit sticky.
On my 2nd pack after a year or so and it didn't come with a squeegee :(
Cela protège des impact au sol, ex des chutes ?
great product, my 2nd purchase, am rough on my phone, will likely buy another in the coming months :)
Waaaah so harrrrd 😩😩
This is completely different from the ones I have received.
"remaining bubbles" not "remained bubbles" in screen instructions
this music is so satisfying.. :D
Should I wear gloves while trying this?
If you fail to do this without dust, air bubbles or bad alignment you just have 2 left hands I'm sorry. These are perfect if you do it right.
I waisted 2/3, these instructions did help, just be careful of human error
really need to update video. i did not have a black foam i had a plug it applicator helper instead
Hmmm the hole punch on my 3 screen protectors that come in the box don’t line up and I keep getting divots and indents on my screen because the protector I think is too soft which is the reason why I already gone through the 3. Next time I would spring for I glass screen protector
Watch! The black sticky foam destroyed the top veneer on my desk when I peeled it back off. Watch where you stick it.
Haha those comments here look so fake
Maybe, but i tend to think they are true, mostly. I followed the video and the installation was indeed almost flawless. Almost.
@@skreeog almost what where the problem then ?
the instructions are good i put on the screen good but beware the black stopper thing i put it on my table and there sticky residue my moms going to be mad damn
Is it just me who found this really difficult 😭
I messed up the first one because I didn't follow the instructions, second one ne went on without any problems because I followed the instructions lol.
it was such a clean installation that i thought that i messed up and that it didnt stick to the phone but once i looked closer that yes indeed it was on my phone
Oh gosh! This concept was challenging .. Ruined a couple of them before getting it right. 🤷♂️
Mine have a green net in the middle. I hate this protector!!!!!!!!!!!!!!!!!!!!!!!!
The screen Looks and feels perfekt
I really don't know if it's on it's to Perfect.
Nice product but I have to watch many times just not to waste the 3 of them because of that one try successfully installed.
What is the green mesh imprint that runs through the middle of the screen protector? I think this screen protector I got is a demo or something because the 1 inch line runs over my phone's screen. As others have pointed out, it's also not the same product. The #2 tab broke off during installation and made everything much harder from there. This is a screen protector. Talk about over thinking it. Don't waste your time. As you can see, they don't care to comment on this channel.
Same here, all 3 went in the bin. Total waste of time and money. Infuriating
Tell me youre a part of Fight Club without talking about Fight Club