why won't my remote start work (EP 74)
Vložit
- čas přidán 13. 10. 2019
- One of many things to check for not remote start.
Video Posted Oct 14th, 2019
The fix in my case was • How to change a 02 oxy...
☕🍩 If this video helped you & you would like to make a modest donation to the channel, why not buy me some coffee & donuts? paypal.me/unclemarksdiyauto?l... 🍩 ☕
Paid link:
🛒 USA Amazon product link:
cheap ok code scanner : amzn.to/355Uy7a
a better code reader/scanner: this is one of the many I own: Ediag YA-101 amzn.to/3hBzlqO
Chilton repair manual 2004-2014 Ford pickups: N/A
Haynes repair manual 2004-2014 Ford pickups: N/A
🛒 🍁 CANADIAN Amazon product links: N/A
A good starter code reader: Ediag YA-101 amzn.to/3tNGNnB
Chilton repair manual 2004-2014 Ford pickups: N/A
📖 Haynes repair manual 2004-2014 Ford pickups: amzn.to/3sj2dZp
As an Amazon Associate I earn from qualifying purchases.
⚠️-Disclaimer: Due to factors beyond the control of unclemark, I cannot guarantee against improper use or unauthorized modifications of this information. Unclemark assumes no liability for property damage or injury occurred as a result of any of the information contained in this video. Use of this information is at your own risk. Unclemark recommends safe practices when working on vehicles and or with tools, lifting tools, jacks and or jack stands, chemicals and or lubricants or anything else seen or implied in this video. Due to factors beyond the control of unclemark, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or lost that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not of unclemark.
🛒 -Links on this video to products are for informational purposes only and in no way are a endorsement of the safety or effectiveness of the particular product.
🔧-You should consult a qualified mechanic for your repairs. Statements made in this video are not intended as mechanical advice. - Auta a dopravní prostředky
Good grief. Just bought a 2013 f150 fx4 and just realised it has a remote starter.LOL Thank you sir!
Bonus that you watched the video! Now you have a free remote start! I have other F150 videos in my F150 playlist and always adding to them! Thanks for watching
frontcentermusician!
Thank you. I hadn't O2 sensor that was out with the check engine light on. I was going to take my 2013 Ford F-150 to the dealership, but all I had to do was change the O2 sensor and my remote start started working again.
Glad the video was helpful onetym282.
Thank you! Now I know why my remote wasn’t starting my truck. LOL
Had a similar issue with our Grand Caravan. Check engine light on, but the issue there was a bad EGR valve. If you have a code reader, hopefully it will point you in the right direction Chino7.
Try your hood switch. Underneath the hood is a black rubber switch bend it up a little towards the hood and your remote start should work.. all door’s including hood has to have that closed signal for your remote start to work..
Yes that is another reason the remote may not start! Thanks!
Thanks for this video !
It is probably something many would not think could be related! Thanks for watching Fabian.
So helpful thank you !
Glad it was of help costarica0305.
This was helpful thanks...
Hope it was something to check first Chivy 24. Most would not think this is related.
You sir are a genuis
I beg to differ, Jeffery. Many just put up with a check engine light on thinking it does not effect anything. It does, actually! As seen here. Many are just scared to take it to a shop worrying that they will get ripped off! (That can happen)
Thanks a bunch I changed the o2sensor a few months ago and now it say’s it is bad already
It might be, Juanita! Does it say what’s wrong with it? Mine was a heater circuit. If your vehicle is burning oil, that can cause issues. A cheap sensor can fail sooner. A wire could have broken or a wire connector could be corroded causing a false code as well.
@@unclemarksdiyauto Thank you I’ll check that out
My check engine light isn’t on though, what else could be the issue?
Dead FOB battery, faulty remote FOB, faulty receiver at vehicle. A good tire scan tool can tell if you remote is sending a signal. I wonder too if there is a fuse for your remote start on the vehicle. Is it a factory remote start?
Well I will try the vehicle system tomorrow morning. Thank you.
Let me know if it works
Well I tried it 3×. Nothing worked. When I Hit The Switch.... A multiple gun shot noise happened for 15 seconds. Now that would be a car theft, but they may return fire. A crime scene!!!!
I need assistance thank you.
I was told to try everything from the inside of the truck. Just like what you said. I'll let you know tomorrow.
@@my101209, but is your check engine light on? That was point of this video! If check engine light on, remote will NOT start vehicle. Doors will lock though...
@@unclemarksdiyauto Sorry I missed your message. The Glass Door On The Tailgate Makes The Shooting Noise. No My Check Engine Light Is Not On.
Have you tried letting the vehicle idle for 15-20 minutes after clearing the codes ? Computer needs to reboot itself at idle
I did not. After the fix, all has been good. No more issues and it has been over 2 years now.
You can also get rid of that annoying battery saver msg. I did. 👍
Good to know!
I forgot to relearn a new battery I installed in the truck. Used my code reader and it had a battery reset. Did that and all of the sudden remote start is working again... good times.
Have not had to ever do the battery relearn on anything...yet. Good your code reader can do it, Rainier! You (and I) would hate to pay a shop to do it.
Aint that the truth! haha
My horn responds but I don’t have a check engine light. What could be the issue?
Pablo, your horn is probably responding means the key is sending a signal. It could be all sorts of issues. Vehicle thinks hood is opened for one thing. Could be something with your brake pedal switch. Impossible to do anything without being there. Is there a fuse in the vehicle for the remote that is blown? Those are some simple things. Vehicle could have thrown a code that has not set off the check engine light & the computer is upset. You could scan it for codes. Just a couple quick ideas.
@@unclemarksdiyauto just fixed it, I turned it on with the door open and it somehow fixed the issue lol 😂
Thank you good sir. Now the wife is happy again 👍
Cool Willis! If it was a check engine light on causing remote not to start, I hope you fixed the problem!
@@unclemarksdiyauto sure did! Once I Cleared the code it fired right up. Thanks again
@@willismacpherson9904, unless it was a check engine glitch, expect the check engine light to come on again until problem is fixed! (Hope it does not though)
If I could purchase the code finder I would. Unfortunately I can't. I hate when that happens don't you?
Yep. Reading the codes is just the start Wayne. Many times it can even mislead you down the wrong path & you end up replacing parts that are good. Best to find a good mechanic (ask friends & workmates who they see) that you can trust to be honest & good at their job!
My check engine light is on because of the dreaded P0016 and my remote start worked. For some reason it's not now
Interesting! Battery dead in remote? Was it dropped and now can't work. Other issues can cause remote start not to work (especally if remote start is NOT factory)
@@unclemarksdiyauto no...replaced battery in remote a couple of months ago. I did change battery in the truck awhile back, maybe that has something to do with it.
@@unclemarksdiyauto I just got it to work!!! Weird!!!
@@bearing_aficionado Thst is weird. Could be the remote or bad battery in remote connection, or a bunch of other things! Lol. Take care!
@@unclemarksdiyauto you too, thanks!!!
you need a truck battery also slow crank
I have been milking this battery for couple years! LOL. I will stubbornly hold off until it gives me starting issues.
Look up valet mode
That is another good point. If you saw the fix to this exact situation, (check engine light on) the repair of the o2 sensor fixed the problem and the remote works again!
Why did he take forever for the point?
Sorry if it took too long Priscilla. Yes or no answers are sometimes what you need, but understanding a bit about the problem is usually a good idea too. I see you have no videos or subscribers. You will find subscribers want a little more than yes or no. The better I get at explaining, the more subs I am getting. Take care and stay well.
U talk to much
Thanks for the input. I will try to be more to the point on my next video. It is good to know the exact reason as to what is happening.