Video není dostupné.
Omlouváme se.
Good Auto Supports Lychee Slicer Tutorials, how to get the best prints possible
Vložit
- čas přidán 14. 08. 2024
- Good Auto Supports Lychee Slicer Tutorials, how to get the best prints possible
For more videos like this, check out our Fully Supported Series and more on our channel.
#fyp #3dprinting #3ddesign #3dprintingtutorial #teaching #tutorial
Links to all our creators that we work with or just plain think are awesome.
Gaz Minis
/ gazminis
Digital Dark
/ digital_dark_pinups
Exclusive 3D
www.exclusive3...
Crippled God Foundry
/ crippledgodfoundry
Officer Rhu
/ officer_rhu
Printed Obsession
/ printedobsession
Witchsong Miniatures
www.myminifact...
#teaching #tutorial #3dprintingtutorial #3dprinting
This tutorial assumes you have some experience with Lychee or other slicers.
Change Log
mango3d.io/cha...
Thanks for watching.
My NEWEST Lychee Settings
Super Light and Light supports
1.10 - 1.22 bar diameter
0.10 - 0.22 tip diameter
3.10 - 3.55 tip length
raft - line/support triangle, or shape
bottom thickness on supports .30 - .25 - .45, raft is .50 (varies based on object mass)
Mediums on 1/24 scale or higher only
1.33 - 1.44 bar diameter
0.33 - 0.44 tip diameter
3.33 - 3.55 tip length
raft - line/support triangle, or shape
bottom thickness on supports .45 - .50 - .55, raft is .60 (varies based on object mass)
Heavy on terrain and heavy parts only
1.55 - 1.77 bar diameter
0.55 - 0.77 tip diameter
3.55 - 3.77 tip length
raft - line/support triangle, or shape
bottom thickness on supports .50, raft is .70 (varies based on object mass)
Happy printing!
Check us out on Instagram too:
/ printmy3dmini
printmymini.store - Shop Buy physical prints!
printmymini.com/ - Hire us for pre-supporting, teaching, training and more!
The future is AI-placed supports. Lychee needs to get on this while they can still be the front-runner. Whoever does this well first will have a huge advantage in the marketplace. Most of my time printing is spent placing supports, with the 2nd largest annoyance being trying to remove them without damaging the model. Nothing will save users more time. I would select any slicer that does this well using AI over any other slicer that does not. It would make printing MUCH more enjoyable, and would significantly increase the amount of printing that I do.
That sounds like a great concept. Would love to see it put to use.
Hey! Great video! My team and I discovered the layer specific island scans a few years back and I published a very similar workflow for (what I call) "Semi-Auto supports" for minis in one of my videos. I think it's a really good entry level option for users who want to try to kitbash, use eldritch foundry or the such, or for users buying from smaller artists who cant afford to pay for professional presupports!
That said, you can take the technique even a step further. Little known fact, Real island scan not only takes layer height into account, but also XY pixel size! If you want to be even more particular or carve out even finer details, you can scan using 2 different pixel sizes too! Like the original Saturn has a 50um XY res and the Saturn 2 has a 28um.
This is taking it to a level most probably don't need, but for the obsessive people out there, this is a trick to taking things further.
Good on you man for getting out there and teaching others! We need more people in our community who are putting in the work to educate and share their knowledge! You got a new subscriber :D
Thanks for sharing that. Really great info. Really appreciate the sub, and the kind words as well. I love teaching, we do comic cons, and expos, and i meet so many people who say they got a printer only to never give a good solid try because they had a fail or two. I hope my videos help them get pas that. Also, thanks for the sub, I am fan, so that means a lot.
@@IPrint3dMinis Right?? I remember being so incredibly frustrated. I'd have just as likely thrown my printer from the roof as to continue to just fail over and over.
I think the better educated out community can be, the more people we will have in the hobby, the more people the more these companies will invest in new tech and resins. Its good for everyone! Keep it up man!
Sound intresring!!how to go down that way? Just configure differenti printers?
@@pierluigimarchi8108 Configure alternate resin profiles, I mean you can add a printer if you want. I just create multiple profiles at different layer heights.
Is there a specific reason to go from small to bigger layer?
You don't have to start at 20um, you can go backwards. I usually print at 35um or 50um so I start with 20 and go up.
I only have Small Object Bracing, Tall Object Bracing, Strong Bracing and Default Bracing in my Support Bracing Presets. Where'd you get the others, like "Small Strong Object" from? I also have Lychee Pro
Sorry I did not explain that in this video, Small Strong Object is a preset I created. You can create custom bracings in the newest edition of Lychee Pro.
@@IPrint3dMinis Do you mind sharing your settings for these presets?
@@privat9605 I will do one better, I will do a video follow-up explaining how to create them. It will be up in a week or so at most, the Small Strong Object is like the Small Object bracings, but I am using thicker braces by a little bit, it's not too drastic of a change.