Noisy Tumble Dryer, Rear drum bearing change Candy, Hoover, Iberna, Kelvinator, 03210179
Vložit
- čas přidán 24. 07. 2024
- This video is on a tumble dryer that is noisy. this video will show you how to replace the rear bearing it can be used on any vented or condenser tumble dryer made by Candy, Hoover, Iberna, Kelvinator.
we will show you how to strip down the machine so this the machine while you're doing the work on how to replace the rear bearing while inspecting the forward drum support Wheels and the Motor jockey Wheels
🛒 Candy tumble dryer parts for all models
repairpartsteam.co.uk/en/cand...
🛒 Hoover tumble dryer parts for all models
repairpartsteam.co.uk/en/hoov...
🛒 New & Used Parts we carry in our warehouse
www.how-to-repair.com
🎥 All Hoover Candy Tumble dryer Videos
www.youtube.com/@How-to-repai...
🔍 How to test NTC sensors
• How to test a NTC Sens...
🔍 How to test Tumble dryer relays
• Tumble dryer printed c...
🌟 Stay up-to-the-minute with our appliance repair guides and tips! Smash that subscribe button and ring the bell 🔔 for the latest updates: [Subscribe and Stay Updated!] (www.youtube.com/@How-to-repai...)
💖 Your support is our backbone, and if our videos or website have been a beacon of help, sharing them on your timeline means the world to us! 🌐
🍻 Saved a few quid or clocked some extra time thanks to our tips? Feel free to [Buy Paul a Beer](how-to-repair.com/help/buy-pau... cheers from us to you for keeping the advice river flowing!
👍 Make us your go-to by marking us as your favorite. If our content hits the spot, give us a follow on social media for an ongoing treasure trove of appliance wisdom. Your support amplifies our work and keeps our community thriving.
(CZcams) / @how-to-repair
(Facebook) / how.to.repair.appliances
#Hoover #Candy #tumbledryer - Jak na to + styl
Thank you for an excellent video. I'm just glad that my machine is conventionally vented and so doesn't have all the condensing gubbins getting in the way!
Hi @dcbain thanks a lot for your comment. It would be really helpful for me to get my video seen, as I'm no IT expert, to either share the channel or at least post it to your friends. My videos might not be CZcams superstars, but they save Appliances from the scrapheap. Share and help us fight appliance waste! Please remember to subscribe to our channel, as that really helps us 😇
Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/ Thanks 👍
@@How-to-repair Shared!
For anyone coming here now. I’ve just followed this step by step to replace the bearing at the back of the drum. Worked a treat.
Brilliant - both describing the problem and the dismantling of the dryer. Once got to it, sure enough the bearing had worn excessively, to the point of being a U shape rather than bull circular bearing.
I'd add one thing ... once the drum is out, probably getting that new capacitor fitted. I didn't, put all back together to find that drum only rotated when empty, but not wish any weight inside ... weak capacitor. As the video says, it very confined with drum in place - possible, but ended with a few scrapes and bruises. ... for the extra £10, wish I'd done whilst drum was out for the bearing replacement.
Props for replacing the screw under the heating element, some techies would not have bothered.
Nice guidance on the belt removal and fitting.
Superb demonstration !!!
Repaired and up and running again thank you very much x
Saved me alot of money for anyone thinking about replacing there capacitor motor themselves there's nothing to it just follow this demonstration!
Cheers again x
Thank you so much this has helped me to do my bearing replacement on my Candy Grand'O'vita Tumble dryer,
Brilliant Video....
great demonstration! saved us tonnes replacing the support wheel where we usually would’ve just bought a new one! thank you!
Just followed your video to replace capacitor on my Candy drier and voila I now have a working drier again £7 well spent and 1 hour to do thank you
thank you very much for creating this video, I was able to disassemble and clean up the whole inside of the machine
Brilliant tutorial.
Just replaced the rear drum bearing because of this 👍
Very cool video! I replaced, together with my son, the bearing and the rear felt seal ! Excellent description. Thank you very much!!!
Glad it helped I hope we have a promising engineer for the future @PfidiK please remember to subscribe to our channel as that really helps us czcams.com/users/shortse432SAb2g08 Thanks, Paul 👍
Thanks for this. Great video, got both front and rear bearings replaced on our Candy TD.
Thank you, you have guided me through a successful repair!
Iam Glad we could help you. If you ever need help please use our site for 24 hour response www.how-to-repair.com/help/contact-us/
If have a question please use our site for 24 hour response www.how-to-repair.com/help/contact-us/
Please remember to subscribe to our channel
czcams.com/users/Apart4u
Remember to Shop with www.how-to-repair.com and it would help us by posting the video or
website on your timeline. This helps us a lot and if we really helped you can
always buy us a beer how-to-repair.com/help/buy-paul-a-beer/
Please remember to mark us to your favourites also I would be grateful if you would
subscribe to our channels social media as this really helps my site and keeps
us going.
CZcams. czcams.com/users/Apart4u
Facebook. facebook.com/how.to.repair.appliances
Brilliantly simple and helpful tutorial, thanks!
Thank you For leaving a comment this is for you czcams.com/users/shortse432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍
Your videos have saved me a fortune, thanks again.
I'm glad we could help you remember there's always a live show every couple of weeks
Perfect one. Super nicely described what to do! Thank you so much!
You're very welcome! Wrinkly hands fix appliances, not algorithms! My videos might not be CZcams superstars, but they save Appliances from the scrapheap. Share and help us fight appliance waste! @Drimer87 please remember to subscribe to our channel as that really helps us czcams.com/users/shortse432SAb2g08 Thanks, Paul 👍
Another top video, just stripped down a similar candy and think the belt has stretched causing the tensioner to contact motor shaft. I will see tomorrow when I fetch new belt and put back together.
Superb video. Really glad to have come across this channel. Saved me loads of time. Keep up the great work!
Muchas gracias, me ayudó mucho en reparar mi secadora.
We bought a Candy condenser tumble dryer and it's made a thunking noise during use since day 1 - and always at the same point of the drums rotation. I've been trying to find an audioclip of what they should normally sound like to compare, but every review skips over this seemingly basic piece of information. It's really annoying, because pretty much every issue with these things (if there is one) can be diagnosed within seconds by the sound alone.
This video is probably the most useful one I've found yet - given that you mention it thunking, and show a very useful teardown - but it would have been more useful still if you had included the actual audio of what this fault sounds like. It might be something to consider in future videos.
We’ve just got a Candy condenser installed and we put the first lot of drying in. As soon as we turned it on it’s made a thumping noise, a bit like a loud heart beat. Ker thump, Ker thump. It makes the same noise empty. We will phone Curry’s tomorrow.
Thanks for that. On my three year old machine the bearing was actually fine but the three pot rivets holding the shaft to the drum were loose and worn. Replaced with M4 screws and nuts and it was good to go.
Iam Glad we could help you
Please remember to subscribe to our channel
czcams.com/users/Apart4u
Remember to Shop with www.how-to-repair.com and it would help us by posting the video or
website on your timeline. This helps us a lot and if we really helped you can
always buy us a beer how-to-repair.com/help/buy-paul-a-beer/
Please remember to mark us to your favourites also I would be grateful if you would
subscribe to our channels social media as this really helps my site and keeps
us going.
CZcams. czcams.com/users/Apart4u
Facebook. facebook.com/how.to.repair.appliances
Ive got a whitenight condenser model b96g8w i need to change fan motor wbat way does the nut turn that holds fan in place
I followed this video trying to diagnose a squeal sound in my DNC D813V-80. Having found nothing obvious wrong, I reassembled only to trip the power on testing. Any idea what I may have done incorrectly to cause this? I did disconnect the motor ansd remove to give everything a thorough cleaning. Thanks
Hello, should the pulley wheels move freely? I can't spin mine as well as you did in the video, is this a sign they need replacing? Thank you very much for your video!
Excellent video.
Thank you very much! @user-ts7dh1rv8r please remember to subscribe to our channel as that really helps us czcams.com/users/shortse432SAb2g08 Thanks, Paul 👍
Hi I have a Hoover visiontech infinity sensor condenser 8kg vtc580b
When it goes into reverse spin cycle it as a extra load noise would that be this issue???
If so do you have a part number/picture of the part
Thanks
Are there any part numbers for bearing and drum ect. Where is the best place to buy
Mines a slightly different model and the drum seems to still be attached without any visible screws at the back. I'm not sure how to uncouple it.
Very well explained
Could the squeaking on every rotation be down to the rear bearing ? Or something else or is it best to replace all the serviceable parts together . Thanks
THANK YOU VERY MUCH FOR YOUR VIDEO IT DID THE JOB
Can you do us a favour and please share this video on your timeline Facebook twitter etc .
This will help other people who can’t get engineers out to help them.
czcams.com/video/rFyGAHVFUW8/video.html&t
facebook.com/how.to.repair.appliances/
Thank you so much for your clear explanations. Great job.
Hi there, I'm in the process of replacing the bearing. Your video helped me alot. But I have a question. Would it be a good idea to lubricate the bearing with some cooper grease? To prevent further wear...
hi i have a bosch dishwasher and i have a problem with check water, i don't know what to do
Thanks for this video
It was great useful
Glad it helped you get your tumble dryer going @khaledyazouri4805 please remember to subscribe to our channel as that really helps us czcams.com/users/shortse432SAb2g08 Thanks, Paul 👍
thanks sir very very good
It's really helpful vedioclip
Glad you think so! @moisesrodrigues2797 please remember to subscribe to our channel as that really helps us czcams.com/users/shortse432SAb2g08 Thanks, Paul 👍
Thank you
Similar to Candy GO DC 36
Now I can get Access to the Pump...
First capaciator Change was done with a cut Out on the Side...worked very Well but doesn't Look Professional :D
Thank you for leaving a comment, I would love you to leave your opinion on our poll about manufactures building in obsolescence to appliances. czcams.com/users/postUgkxygHomnUySd_bYjaJBdEHPO6T4dYo9Ahm
and this is for you czcams.com/users/shortse432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍
Has worked very well. No problem to deassemble and assemble the dryer.
Video was really helpful...thank you
Just wondering what metal the shaft and bearing are made from, is the bearing made from a softer metal than the shaft?
Yes, bearing is softer so is sacrificial.
good video
Can you do us a favour and please share this video on your timeline Facebook twitter etc .
This will help other people who can’t get engineers out to help them.
czcams.com/video/rFyGAHVFUW8/video.html&t
facebook.com/how.to.repair.appliances/
My hoover condenser dryer when it goes into reverse spin it start making a loud banging noise ,
Would that be the bearing ?
the bearings do cause dryer to bang when turning
Great video very helpful, have you thought of getting a cordless screwdriver?
Iam Glad we could help you
Please remember to subscribe to our channel
czcams.com/users/Apart4u
Remember to Shop with www.how-to-repair.com and it would help us by posting the video or
website on your timeline. This helps us a lot and if we really helped you can
always buy us a beer how-to-repair.com/help/buy-paul-a-beer/
Please remember to mark us to your favourites also I would be grateful if you would
subscribe to our channels social media as this really helps my site and keeps
us going.
CZcams. czcams.com/users/Apart4u
Facebook. facebook.com/how.to.repair.appliances
(a) It isn't a great hardship.
(b) He's probably very aware of the lack of mechanical training of most of his viewers and would rather not risk them overtorquing, snapping heads, stripping threads or cross-threading, which could cause them even longer delays. Doing it manually means their inexperienced fingers will be able to sense the early warning signals that things may not be going right.
(c) He may use battery-powered screwdrivers when not filming.
Hi there, I've just put it back together it is now starting and turning with the new capacitor but the drill is making a grinding noise now, any ideas what could be wrong?
check its seated correctly on fron pads Thanks 👍 for watching and please remember to subscribe to the Channel as that's what keeps us going in able to make the video for you
How much would it cost to get someone to fix plz
Cand you make a video on how to replace of drum support wheel on Candy grand vita
You should find this in one of my older videos on Hoover or candy machines Wrinkly hands fix appliances, not algorithms! My videos might not be CZcams superstars, but they save Appliances from the scrapheap. Share and help us fight appliance waste! @MrHDBABA please remember to subscribe to our channel as that really helps us czcams.com/users/shortse432SAb2g08 Thanks, Paul 👍
Great videos, do you have any on noisey dryers, mine makes a squealing noise but only in one direction?
Can you do us a favour and please share this video on your timeline Facebook twitter etc .
This will help other people who can’t get engineers out to help them.
czcams.com/video/rFyGAHVFUW8/video.html&t
facebook.com/how.to.repair.appliances/
Hi Tony! Did you find the problem? Same here! Only one direction and sounds in the rear bottom area
My hoover dryer is screeching on some settings. Everything else works fine. Any ideas ?
WHY DON'T YOU UPLOAD A VIDEO OF THE FAULT TO CZcams AND THEN I WOULD BE ABLE TO HAVE A LOOK AT IT FOR YOU, trying to analyse faults when I do not have the machine in front of me is very difficult difficult so upload would make it much easier for me to be able to help
Hi I'm looking to know how to replace candy gvs c10de-80 bearing , I can't find anything on it can you help please
this will be coming later in the year. Really glad it helped you fix your problem Thank you for leaving a comment this is for you czcams.com/users/shortse432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍
If shafts gone do u just drill out and pop rivet new 1 on cheers
You can either grill or grind, but make sure you do not leave any burd ends as this will snag the clothes. If you have a look at our channel, I have done a pacific video on this. Please remember to subscribe to the channel is that really does assistance glad we could help you @stevepest3184 this is for you czcams.com/users/shortse432SAb2g08 please remember to subscribe as that's what keeps this channel going. Thanks 👍
@@How-to-repair I'm struggling get shaft and bearing for one touch condenser hoover dryer
Great video, got me out of a bind. But in what world is that a bearing? These machines are obviously designed to fail! Metal rubbing on metal is not modern engineering at its best, is it folks?
I cant get the pulley out. Darn it
👌
oh dear what have i started
Why dont you use a powered screw driver ?????
I normally do, might not have had it to hand when I made this video
Great Video, but it exposes poor quality components especially the drum bearing which is a manufactures ripp-off trick that the government should halt.. Using a heavy duty bearing would avoid all this work having to be carried out.
I disagree slightly as the machine was built for a price, but if all heavy parts are put in it would not be a cheap machine. the has to be a balance! Thank you For leaving a comment this is for you czcams.com/users/shortse432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍
Thank you for your very informative video. You helped me a lot to service and replace capacitor in my Candy dryer. Cheers
Thanks so much for a very detailed video. It helped me to 100% of changing the bearing. Very Best Regards from Leffe Sweden
Can you do us a favour and please share this video on your timeline Facebook twitter etc .
This will help other people who can’t get engineers out to help them.
czcams.com/video/rFyGAHVFUW8/video.html&t
facebook.com/how.to.repair.appliances/