Best Budget Foam Cannon? | Sooprinse | Review & Testing | Foam Tips
Vložit
- čas přidán 17. 04. 2022
- Today we try out what could be the best budget foam cannon yet. What makes the best is not only foam, but functionality, efficiency and ease of use are deciding factors as well. Enjoy the video and the bloopers.
Follow Me on Instagram - / carswithkeav
Check out my Amazon Storefront - amazon.com/shop/carswithkeav
Sooprinse Foam Cannon - amzn.to/37nMAut
Gtechniq Products W4
Code Heidi10 for 10% off at www.gtechniq.com
or check out the Gtechniq section of my Amazon Storefront.
The Cheap Wash Cart
Cart - amzn.to/3KDlLR1
Portland Pressure Washer - amzn.to/35C0xn8
Also available at Harbor Freight
Greenworks 1500 (Similar to the 1700) - amzn.to/36gIZxb
Greenworks 1700 - Only available at lowes
Spray Gun and Foam Cannon - amzn.to/3gFRQKQ
Garden Hose Quick Disconnects - amzn.to/3FT4Sih
Braided Hose with fittings - amzn.to/3ALgLWK
Hooks - amzn.to/3I2A0ND
Brass Shutoff Valve - amzn.to/3q2hy1m
Other Products I use:
Awesome Multi Tool Wrench - amzn.to/3ghAOTM
MJJC Foam Cannon - amzn.to/3v00rO6
MJJC Site - www.mjjc.com/collections/foam...
Pressure Washer Hose - amzn.to/2WEaD2M
Pressure Washer Hose Reel - amzn.to/2HwjdIZ
MTM Swivel Spray Gun Fittings installed - amzn.to/3dTuKPh
VE52 Pressure Washer - amzn.to/3fWWqp9
1.1 foam nozzle - amzn.to/3ocVCj4
pressure gauge - amzn.to/3qWOIQG
1/4 T fitting for pressure gauge - amzn.to/33SsEho
Sponsors and Discount Codes:
Sliplo - HEIDI at or 15% off sliplo.shop/carswithkeav
Gtechniq - Heidi10 for 10% off at gtechniq.com
Blackvue - Heidi10 for 10% off at blackvue.com/ref/Heidi_the_335/
BBS Wheels- www.bbs-usa.com
Eurofed - www.eurofedautomotive.com
Street Approved Customs - www.streetapprovedcustoms.com/
Liqui Moly USA Canada - www.liqui-moly.com/en/us/
Camera Equipment:
Main Camera - amzn.to/2IbheXB
50 mm Lens - amzn.to/3anD06y
Camera Light - amzn.to/3jtDAHW
Lights - amzn.to/3hhxGXD
GoPro - amzn.to/3wnxTxZ
Dashcam - amzn.to/38jFlOB
Tripod - amzn.to/3hoVCcZ
Gopro Mounts - amzn.to/38hmnrN
Main Camera SD Card - amzn.to/2x00FeV
Gopro & Dashcam Micro SD Card - amzn.to/2Ti2PQ0
Main Camera Batteries - amzn.to/2IqoIGF
Filters - amzn.to/2VPYPYL
My Social Media:
Instagram - / carswithkeav
Facebook - / heidithe335
Tiktok - wm.tiktok.com/WEM11y/
#foamcannon #carwashing #sooprinse - Auta a dopravní prostředky
This is on Amazon right now for $24.99
it is 17.59 right now due to amazon prime deals
This is the only guy that test cheap tools most of us just wash our cars ourselves at home in our day off early in the morning we don’t need expensive equipment to get the job done unless you do detailing for a living
There is always something for everybody so why focus on the expensive stuff. I do review a little bit of everything. Glad we got so many good choices at any price level in todays world.
the bloopers are killing me man. Keep it upp!!!
I got more where that came from. All day everyday. LOL
I know very little about foam cannons and other water related car wash tools. This is definitely my go to channel for this type of content. Thanks a lot Bro and great work as always 💯💯
Appreciate you bro!
Saw your video, was looking for a new foam cannon and quickly went to Amazon when I saw how good it was! Thanks!
Hope it works great for you.
I hadn't seen that foam canon before... I'm really digging the way it looks and how it doesn't fall over easily like my older PF22.
It was a great find searching Amazon. Problem is it seems to be delayed a good bit on shipping and they raised the price.
Not bad! Another great review man!
For less than $30 you can't beat it.
Sweet Heidi cold start, sounds good!
Sooprinse also makes a shorty pressure washer gun with a swivel for ~$32, 3 yr warranty.
I might have to try that. Sometimes i run out of ideas that would be a good one to do a quick video on. Thanks for the suggestion.
I have both the MJJC and the Sooprinse, I use the MJJC for the Car and Truck body with Adams Mega Foam and the Sooprinse for the wheels and tires with P&S Brake Buster…great system
I use several and I kind of like the Sooprinse as it gives me the right amount of foam. For youtube you have to go for thickest stuff as that's what people like and its fun to do. Effective foam though is better when it runs off the surface easy.
I’m a fan of the clear bottle lol seems like a pretty legit foam cannon for the money 👍🏽
Clear bottle is better to me, not sure why its not the norm.
Great cannon for the money. I sent one a month ago to my cousin for his first foam gun and only bought it because of the clear bottle as I think that is a nice touch.
The clear bottle is great. Not sure why nobody is using them. Lets you see how clean the bottle is when changing chemicals and how its diluting.
That paint is 🔥! Sweet sweet ride!
Thank You
The clear bottle is legit and the levels for dilutions 👍🏻
Agreed
I installed a MTM PF 22.2 Filter in my Sooprinse Cannon. For about $5 you can Significantly Upgrade this Foam Cannon.
Its easy to remove the old filter and install the PF 22.2 filter.
You can also get the filters for the MJJC as well. You can get their silicon tubes and weights balls as well.
Thanks for the video. I have a $15 one like the "free one" you showed.. it does well with my Dewalt 2100 pressure washer. I just ordered the Trinova, got it today and I think its going right back when I just saw this one, came on here and see your thoughts and say yep, I am glad I ordered this one. The other two go back tomorrow I think. . I like the bottle. The MJJC, I dont trust reviews, they ship everyone free ones to say good things about them. Sorry. And for $90 for a plastic bottle with a sprayer on top I just cant justify.
MJJC even though they sent mine for free are amazing, but we’re much better in the $60 range where they used to be. You can get on Amazon for $80, but I understand it’s a good bit. Sooprinse is all you need really it does it all with just slightly less foam, but still great foam.
Here's my review.
.
Disclaimers
This is my 1st foam cannon and 1st use of any foam cannon. So I have nothing to compare to
I only had Meguiar's Gold Classic car soap. Not a dedicated foam cannon soap.
I used 2 oz of Gold Classic to 30 oz of warm/hot tap water in the bottle.
The water for the pressure washer was straight from the tap. No filters of any kind.
I haven't tested the hardness of my water but an internet search shows 158 ppm for my city.
My pressure washer is a Sunjoe SPX3500 (2030 max PSI, 1.75 max GPM)
.
.
The nozzle seems well built. It moves freely. I didn't try the vertical to horizontal adjustment. Though that moved fine. It was little tighter feeling.
The bottle I'd be concerned it might crack if you dropped it.
The bottle felt top heavy when empty. When full it seemed fine. If I had to set the wand and cannon down, I just turned the wand 90 degrees and it was stable.
The markings on the bottle were very hard to read. Small, a little blurry and not very raised. I'll probably highlight them with a Sharpie or paint
The pickup tube had a filter at the bottom. It was long but that allows you to bend it and use all of the soap solution in the bottle when you hold the bottle at an angle.
The wide mouth on the bottle made filling super easy.
The widest spray pattern was too wide, the center of the spray was thin and the edges of the spray had the most foam.
Opening the spray pattern just a little made for a good spray (foam) distribution. I'll just leave it set here.
Like Keav says, use turn the soap/water ratio knob to the right and leave it.
It was rather runny foam but it clung and dwelled well. My gut tells me this is better for loosening dirt than the shaving cream or styrofoam thickness.
I was able to foam a 2017 Accord and tires/wheels twice with a little left over.
.
For $23 I'm happy. I'm guessing it achieves 80-90% of what more expensive foam cannons can do.
Great review. The tightness is good so the spray pattern stays in the same spot. I think you will see a big difference using a dedicated foam soap. Gold Class is more of a lubricating bucket soap for mitt wash. 1 more oz to get that 10 to 1 and a foam soap and you should see great results. Sharpie is a great idea.
Ha. I just ordered this the other day so I could use it on my wheels and fender liners. Great review!
It is a great product. You will be pleased.
Thinking if you put tape or pipe dope on the cap that may not leak too. I will give it a try on mine.
Might work. Not sure if the hole on top of the cap is needed for vacuum or something like that. The ones that are leak proof still have the small hole it just filled with rubber that only allows air in, but nothing out.
1.Are you on coilovers 2.your fitment looks good 3.nice color on the car
Thank you and I am in Bilstein B14 Coilovers
I wonder if you screw the mjjc top on the clear bottle does it still leak if you turn it upside down?
It does not leak. The part that leak comes from the top itself. The MJJC has a breather that doesn't allow water to get out. This one its just a hole in the top so its going to leak.
Does yours leak on the bottom part of the teal nozzle where the two metal pins are when its in use?
I have not seen it leaking there. Might be a gasket inside either out of position or failed maybe.
Hey boss in your opinion which one is a little better that one or the bearforce thnx
Bear Force all day.
Thank you, perhaps next time use front half of the car with one canon the other half with the other cannon. Great video.
I will take that into consideration. Thx for the feedback.
I put a 1.1 orifice on it using a cheap ryobi 2,000psi 1.2gpm pressure washer and it created zero foam. Ended up spraying out less pressurized slightly soapy water. Any thoughts on whats happening for me with this setup?
Got to be something with the orifice. Possibly the wrong size was given. I think we are having a DM convo on Insta about this.
Did you have trouble replacing the privacy can you make a more detailed video on how you switched irt
I had no issues, but made a video on changing them out. Here it is. czcams.com/video/4unMmhMWVpc/video.html
how did you take that thing off in order to get to the orifice off. That sucker is hard to get off. I just got my gun today and been trying to take it off and it's hard and won't budge.
I have had some that are very difficult. Sometimes it takes a very big screwdriver to get the leverage. They sometimes use thread lock that’s makes it difficult.
As long as it throws shaving cream consistency, I'm fine with it.
I’m with you on this!
Currently delivery time is June 21. Great video!
Dang, things change so fast. It was 21.99 and I got it the next day. That was two weeks ago and showed many in stock. That's why I edited out the mention of price in the video. I was going to make it the best $20 foam cannon money can buy. Then as I looked it up during editing it was out of stock. Then when I uploaded the video and put the text link from Amazon it showed 29.99 and back in stock, but didn't check the delivery date. LOL
@@CarsWithKeav Back in stock as of this post with a $24.99 price. Is it worth buying if I own the MTM and Griot's BOSS?
@@davidbram only if you want that clear bottle to use with the BOSS or another wide neck foam cannon.
@@CarsWithKeav the bottle fits the Boss? What about an extra cap?
@@davidbram Yup, BOSS and MJJC both fit on that bottle. The BOSS actually fits on the MTM PF22.2 as well with those inner threads.
Keav, just need some clarification, the foam gun comes with a standard 1.25 orifice? and then you swapped it out for a 1.1 correct? I use a gas pressure washer 3500PSI and 3.5GPM so I need a 1.25, thank you
This unit comes with a 1.1 installed. Sorry for the confusion I mentioned the 1.25 just to explain how I tell which is which. You for sure with that high a gpm would need a 1.25 maybe even a 1.35 or 1.5.
@@CarsWithKeav my pressure washer has 2.5gpm can I still use the 1.1mm? Or should i go back to the 1.25mm??
@@matheusgomes919 All depends on the pressure washer. If it’s gas then for sure it needs 1.25. If it’s Electric let me know the model. A lot of ones out there say they have 2.5, but it’s close to half that especially from Amazon.
@@CarsWithKeav it’s gas, thanks man, can the 1.1mm one mess up my pressure washer if I don’t switch it back to 1.25mm??
I’m switching it to 1.25mm tomorrow, I’m just curious if it would cause any damage
Powerplay electric
SPYDER 2000 PSI 1.4 GPM what filter I need ?
Do you change the orifice the same way on this one? I’m trying a similar one just red and black top but the quick connect on the back is tough and not wanting to loosen like others. I don’t want to break it if it loosens another way
Some of the manufacturers like to put lots of thread lock in there. Takes a good it of leverage and sometimes some heat to loosen it. I wouldn't worry about breaking anything as long as you have the wrenches on the metal parts.
@@CarsWithKeav okay, I appreciate it! As long as I know that’s the correct way. Some of those other ones have that color material on the threads so it was loosening pretty easily.
@@CarsWithKeav and please never change your videos. Having bloopers at the end was def creative and funny as hell
Hi! Do you attach this to a garden hose for the water?
Has to be attached to a pressure washer using a 1/4 quick connect.
I just purchased the Spooprinse foam cannon, but I’m having a very difficult time removing the lid after use. Anything I can do to solve this problem?
This happens to most foam cannons with large necks. The pressure tightens it. Just got to use the manifold hold on tight to the bottle and loosen.
@@CarsWithKeav I’m not sure what you mean
Keav, would this be good for someone who has never hand washed? I have a lexus.
Should be, but best way to clean is to hand wash especially after driving in the rain and it drying on. Unless you are ceramic coated then a maintenance wash every few months.
@@CarsWithKeav yes I just got it ceramic coated sir but which foam cannon should I order that has no “orfice” adjustment like you were just doing at the start of video?
Just to clarify the office that came with the soprinse foam cannon stock was a 1.1 mm orfice? Also I picked up this foam cannon a month ago and haven’t used it yet the clear bottle is what did it for me and at $20 it was a great price I plan to put break buster in it
The one I had did have a 1.1mm orifice. We got lucky, i got mine for 21.99 and next day delivery. It is now 29.99 and it doesn't deliver till June.
Does it need the pressure gun in order to work?
No, if your Pressure Washers stock gun has a 1/4 quick disconnect it will work with that. There are some adapters out there that will allow you to connect to the stock gun.
Will the mjjc pro top fit any other bottles like the griots
It fits most all of the big neck bottles except the Griots Brilliant finish. That bottle has its own size nobody else uses, but the BOSS cannon bottle fits perfect. I switch bottle around all the time when doing comparisons. So I have the same diluted solution in a single bottle and just swap the heads.
@@CarsWithKeav awesome thank you very much
confused....is a 1.25 or 1.1 orifice in the gun when it arrives from factory ??? i have one on delivery.
Comes with a 1.1
The bottle is brittle?
Has not been for me. Possibly if you used all the time with different chemicals and let UV light hot it all day.
Did u say it came with the 1.1 orfice or you had to add it?
Comes with a 1.1mm installed. I just took it out to check to see what it was. the example I used in the video was one I had lying around. I got them laying around and lost like 10mm sockets. LOL
The + sign is for more water - for less water. Being obsessed with foam this seems completely ass backwards.
Agreed
Astroai vs Sooprinse?
I have only tried the Sooprinse so far. Most of the listings I have seen for the Astroai they look very familar. They might even be the same build just rebranded and different colors.