Latency…..you need to work on a LOWER latency wireless system with LESS compression to work with Focus Pro. Your current wireless solutions, including this one are not great for focus pulling.
@@antone9751 people play competitive shooters with 35ms of latency just to the server and back, not counting input latency, I think 35ms is just fine...
This isn't a solution for focus pullers, not primarily at least. This is a cheap solution for off camera monitoring. Regardless, 35ms of latency really isn't a big deal in most situations if you're at all experienced at pulling focus. I've accurately pulled focus with the original Ronin RavenEye, and that's low resolution wifi. Much worse than this is. If you want sub 20ms latency, you need an analog solution. And DJI is just never gonna do that, because it's antiquated technology with plenty of downsides of it's own.
It would be great to have the transmitter built-in to the monitor (like the Hollyland Mars1) eliminating the bulky addition of a transmitter. The current DJI monitor is only a receiver 🫠
I'm still waiting for a drone or whatever that will reach ISS and bring back some beautiful footage. DJI! What are you waiting for? Or a submersible drone perhaps?
The increasing demand for livestream prompts us to perceive UVC output as a must-have feature on both Wireless Video Receiver Units & Cameras. Therefore, I hoped to see integrated UVC on the Receiver unit. Now that UVC output is missing, I hope DJI will launch SDK for Third-Party developers to integrate the USB-C video output into their App for farther management, especially Streaming Apps.
It would be awesome if our drone controllers could be used as an extra monitor and gimbal controller with this transmitter. BTW. Already ordered for our film next week
Awesome, a smaller, lighter, much more affordable transmission system with gimbal control for my RS3 Pro, maybe its time to build that cinelfiter after all...
@@joelmulder yes, I own one and have used it quite a bit. My issue is that the connection is often unstable and prone to interference, especially on my shoots where I'm around a lot of other wireless signals (raves, clubs, etc.). Its range is also only rated for like 200ft, and in my experience it's pretty much always worse than that by a lot, which makes it unsuitable for use on a cinelifter. This new system is promising up to 3km (10,000ft) and even if it only gets a third of that, that's more than enough for my needs, especially if I'm flying a gimbal. The previous solution was to use the full-fledged DJI Transmission, but this new system is 1/3 the price and still has 1/2 of the very impressive range of its bigger brother, while being significantly smaller and lighter, which matters quite a bit when you're trying to minimize weight on a drone.
They already have much better transmission tech in their drones. This is more or less an external and paired down version of the O3 transmission system. This has a max range of 3km, while O3 Pro in the Inspire 3 has a range of 13km.
Already ordered! How is the transmitter mounted to the small HD 7” monitor at the 38second mark in this video? I desperately NEED that battery bracket or whatever is being used to mount it that way!
Please make this compatible with DJI Action4. The Action 4 does not currently offer a USB-C to HDMI output (like GoPro has done for years). If that could be fixed in Firmware I'd be so freaking stoked. Thanks
wow... 🎉 amazing and now what happens with the transmitters and receivers that they already have, and what about the dji transmission (monitor), does it replace them or integrate
From the DJI site: "Can I link DJI SDR Transmission with DJI Transmission? No. Furthermore, if DJI SDR Transmission and DJI Transmission are used at the same site, it is crucial to ensure that their central frequencies do not overlap."
Why not use a phone accessory with the charger that launches an app that connects to the other moder And those phones are connected Like the DJI controller
Hi got a question, I am looking to purchase this system, I currently use an A7Siii and an A7IV, I use a alien hydra rig ( I do a lot of car cinematography) My main question is, can I connect my cameras to a Apple tablet and have all the camera functions on the tablet ? Just like the OG DJI transmission ? Main reason I really need this to be honest, for focus leaking and monitoring of meters. If anyone can help I’d really appreciate it Thanks
Hi, I only need this kit for video transmission but when i check the camera compatibility chart I don’t see any higher end cameras like the Alexa. Will it work on an Alexa? I don’t see why not since it has an SDI in, but i don’t see any info that tells me it does, which is weird. Anyone know?
@@joelmulder Thanks for a prompt response. I have only one hdmi port that says "hdmi" on my 4D and i never used it. Is it the "hdmi/sdi" port or there is some additional equipment required (like DJI Ronin 4D Expansion Plate)?. Thanks again
@@timurgafforov8856 Yep, that's it. All this system does is transmit whatever HDMI signal you plug into it. It can control certain cameras over USB-C also, but camera control is not supported on Ronin-4D according to the compatibility list on DJI's site.
@@timurgafforov8856 Yep, that's it. This will transmit any HDMI-out signal you plug into it. It can also control certain cameras over USB-C, but that's not supported on Ronin-4D according to compatibility sheet.
No words on compatibility with the DJI Transmission ecosystem (and also confusing to feature the Inspire 3 on this promo video). You can do better @DJI !
There is, you just didn't bother to look it up. From the DJI site: "Can I link DJI SDR Transmission with DJI Transmission? No. Furthermore, if DJI SDR Transmission and DJI Transmission are used at the same site, it is crucial to ensure that their central frequencies do not overlap.""
@@joelmulder where did you find this? I have read everything on the DJI site, product page and store page plus the FAQ and there is absolutely no info on this. Assuming i didnt bother to look was mean bro, chill.
DJI is thriving in technology. I wish to see a Mirrorless Full frame camera from DJI
OMG. Nice idea. But I don't really think, it's coming soon.
Didn’t DJI buy HASSELBLAD Cameras seven years ago???
tho their pricing of said camera might be too high for a reasonable buyer
@@pauljoseph8338 Nope, DJI is just a majority shareholder. DJI does not own the company.
DJI is the embodiment of " innovation"
I swear, some people dont know what to do with money, I'd buy every single thing from DJI if I'd be rich haha
Congrats on 2 MILLION DJI!
❤
Your Technolgy is amazing , giving us an amazing workflow .. Thanks DJI
Congrats on 2 million🎉🎉❤
Thanks❤
@@DJI Your most welcome 🙏
Damn what an amazing price point!!! Good job DJI!!!
Unboxing ours shortly. Can't wait!
Congrats on 2 million
Congrats for 2mln🎉🎉🎉
Love from India 🇮🇳❤️🤩
Wow, amazing! It's incredible to see how DJI continues to innovate and push the boundaries. Great 👍🏻
Latency…..you need to work on a LOWER latency wireless system with LESS compression to work with Focus Pro. Your current wireless solutions, including this one are not great for focus pulling.
@@antone9751 I dont think 35ms would be noticeable.
@@antone9751 people play competitive shooters with 35ms of latency just to the server and back, not counting input latency, I think 35ms is just fine...
@@eminyesillie122 that's noticeable ... and a lot for a focus puller
@@OurletBeurre bro its 1 singular frame
This isn't a solution for focus pullers, not primarily at least.
This is a cheap solution for off camera monitoring.
Regardless, 35ms of latency really isn't a big deal in most situations if you're at all experienced at pulling focus. I've accurately pulled focus with the original Ronin RavenEye, and that's low resolution wifi. Much worse than this is.
If you want sub 20ms latency, you need an analog solution. And DJI is just never gonna do that, because it's antiquated technology with plenty of downsides of it's own.
Alqassam hella excited for this drop 😂😂❤❤❤
It would be great to have the transmitter built-in to the monitor (like the Hollyland Mars1) eliminating the bulky addition of a transmitter. The current DJI monitor is only a receiver 🫠
I'd really like to try this :)
Damn, DJI is dominating on everything
Looks like a solid device! 👍🏾🔥
Amazing transmission range. This device connects your corporate Wi-Fi network to a server all the way in China.
Can be used for transmitting the avata 2 image or any fpv drone with air unit? Conecting to the phone the transmitter
Congratulations 🎉🎉🎉
Hope to get the actual sound below and around from flying a drone that would be so awesome
dji is the ultimate
I can not wait for the DJI dog.
I'm still waiting for a drone or whatever that will reach ISS and bring back some beautiful footage. DJI! What are you waiting for? Or a submersible drone perhaps?
Awesome
Let's go!!
We are looking for filming production whats your opinion?
The increasing demand for livestream prompts us to perceive UVC output as a must-have feature on both Wireless
Video Receiver Units &
Cameras. Therefore, I hoped to see integrated UVC on the Receiver unit. Now that UVC output is missing, I hope DJI will launch SDK for Third-Party developers to integrate the USB-C video output into their App for farther management, especially Streaming Apps.
LATENCY, LATENCY, LATENCY.
I love DJI
Please please... Start a shop in India. 🙏🏻🙏🏻🙏🏻🇮🇳🇮🇳🇮🇳 We need your equipment.
It's the Ghostbuster Tool :D :D
It would be awesome if our drone controllers could be used as an extra monitor and gimbal controller with this transmitter. BTW. Already ordered for our film next week
@DJI Perfect for multi-member team projects. Nice!!!
In Future we will be able to get our hands on different products not only drones but electrical appliance and devices
Where foicking osmo action 5 pro?
Awesome, a smaller, lighter, much more affordable transmission system with gimbal control for my RS3 Pro, maybe its time to build that cinelfiter after all...
That already exists, it's called DJI Ronin Image Transmitter (previously RavenEye). It's compatible with Ronin-S 2 and up.
@@joelmulder yes, I own one and have used it quite a bit. My issue is that the connection is often unstable and prone to interference, especially on my shoots where I'm around a lot of other wireless signals (raves, clubs, etc.). Its range is also only rated for like 200ft, and in my experience it's pretty much always worse than that by a lot, which makes it unsuitable for use on a cinelifter. This new system is promising up to 3km (10,000ft) and even if it only gets a third of that, that's more than enough for my needs, especially if I'm flying a gimbal. The previous solution was to use the full-fledged DJI Transmission, but this new system is 1/3 the price and still has 1/2 of the very impressive range of its bigger brother, while being significantly smaller and lighter, which matters quite a bit when you're trying to minimize weight on a drone.
Did the DJI app finally update to add anamorphic de-squeeze?
“Introducing, DJI Snap , our first mirrorless camera”
One day. ⏳
Think this will work live-streaming a concert with the cameras?
Great 👍
My question is can i control my sony a7iv camera without the ronin app ,just with RX and TX units and monitor ?
Any chance to get in india??
Amazing, grats for 2m
Ada lagi dong mainan barunya DJI. mantap!!
amazing gadget
but it cant get the Ronin app working on Android 14 or even get it to the PlayStore
When the osmo action 5 pro come out? I can not to wait.
I have a feeling they're going to put this in drones next.
They already have much better transmission tech in their drones. This is more or less an external and paired down version of the O3 transmission system.
This has a max range of 3km, while O3 Pro in the Inspire 3 has a range of 13km.
Ordered! But can’t find any info on the batteries. Can I use the same ones as the transmission??
It uses standard Sony NP-F batteries, so no, you can't use the proprietary WB37 smart batteries used in the Transmission system.
Also via type-c so that can be charged directly from RS Pro gimbals
OH neat, lets stick it on FRS and see who we piss off.
Only missing synchronization AI for Meta lives
Still waiting for a beacon for my drone to follow me🤷🏿♂️
Already ordered! How is the transmitter mounted to the small HD 7” monitor at the 38second mark in this video? I desperately NEED that battery bracket or whatever is being used to mount it that way!
Please make this compatible with DJI Action4. The Action 4 does not currently offer a USB-C to HDMI output (like GoPro has done for years). If that could be fixed in Firmware I'd be so freaking stoked. Thanks
wow... 🎉 amazing
and now what happens with the transmitters and receivers that they already have, and what about the dji transmission (monitor), does it replace them or integrate
From the DJI site:
"Can I link DJI SDR Transmission with DJI Transmission?
No. Furthermore, if DJI SDR Transmission and DJI Transmission are used at the same site, it is crucial to ensure that their central frequencies do not overlap."
Please make a mesh-wifi for w-lan 😅
We want the O4 air unit
Soooooooo this is Like a WiFI Hotspot kind of thing then?! I’m confused.
1:22 Anybody know what building that is? Where this waterfront property is located?
Must be nice to have access to the US Market. "Get it?" 🗿🗿
35ms. Not suitable for live stream or focus pulling.
Esse veio de pra bater de frente com o Pyro da Hollyland
what does this do ?
Why not use a phone accessory with the charger that launches an app that connects to the other moder And those phones are connected Like the DJI controller
how it works with raven eye mounting on rs4 pro when i want to use active track and use this wireless transmission?
But... There was always an sdr type of system in all the wireless things you guys made for handling channel hopping and all those nice things...
what about o3(4)air?. pls one textsheet with numbers for us. range, milliwatts, latency warnings etc.
Make a proper gimbal. One day after purchasing and using it, the power button broke, so I had it replaced after service. Something to reflect on
Hi got a question, I am looking to purchase this system, I currently use an A7Siii and an A7IV, I use a alien hydra rig ( I do a lot of car cinematography)
My main question is, can I connect my cameras to a Apple tablet and have all the camera functions on the tablet ? Just like the OG DJI transmission ?
Main reason I really need this to be honest, for focus leaking and monitoring of meters.
If anyone can help I’d really appreciate it
Thanks
Gleich mal bestellen
Where O4 for FPV
Hi, I only need this kit for video transmission but when i check the camera compatibility chart I don’t see any higher end cameras like the Alexa. Will it work on an Alexa? I don’t see why not since it has an SDI in, but i don’t see any info that tells me it does, which is weird. Anyone know?
So it can extend drone transmission range too?
No. Completely different system.
Dang it thought it was something for long range FPV lol
Just shut up and take my money
I would have chosen a different name than ‘SDR’…
DJI o4 air unit please
Se puede usar con mi Drone mavic 3?
I don't think it's compatible with the drones
That shi cray
Nice😊
DJI👍🏻👍🏻👍🏻👏🏻👏🏻👏🏻❤️❤️❤️
Great
Please, tell us that this thing works with DJI Ronin 4D
If you plug it into it's HDMI/SDI port, yes.
@@joelmulder Thanks for a prompt response. I have only one hdmi port that says "hdmi" on my 4D and i never used it. Is it the "hdmi/sdi" port or there is some additional equipment required (like DJI Ronin 4D Expansion Plate)?. Thanks again
@@timurgafforov8856 Yep, that's it. All this system does is transmit whatever HDMI signal you plug into it.
It can control certain cameras over USB-C also, but camera control is not supported on Ronin-4D according to the compatibility list on DJI's site.
@@timurgafforov8856 Yep, that's it. This will transmit any HDMI-out signal you plug into it.
It can also control certain cameras over USB-C, but that's not supported on Ronin-4D according to compatibility sheet.
1:00 1:04 1:05 1:05 1:06 1:06 1:06 1:06 1:07 1:07 1:07 1:10 HOLA COMO DEVO ASER PARA COMPRAR UN DRON DJI EN SU PAJINA SOY DE ARGENTINA Y GANAMOS LA COPA AMERICA🎉🎉🇦🇷🇦🇷🇦🇷🇦🇷
dji pls like my comment. your drones are so sigma. +100000 Aura
What drones is it compatible with
Anything that uses RC pro
None. This isn't intended for drone use, those (the professional ones at least) have much longer transmission ranges anyway.
@@joelmulder ok thank you bc I was in a conversation while watching this and when I looked down and saw the drone
4th hahaha, cool features
Not sure how this works or how I would use it. Need some real-world examples.
Could you please dji send me osmo pocket3 because i want to start vlogs ?
Yeahhhh!
Dji please give us an 04 fpv receiver with HDMI out, I’m really want a DJI Avata 2 but need an hdmi out
DJI releasing their entire 2025-26 product portfolio before they get canceled in the us
lol the ban was already removed from the ndaa so we’re good
wow great but still not 4k lol
SHEEEESHHHHHH
Dear DJI. make this thing cheap in Indonesia. I guarantee it will sell
how big is latency?
2
80ms. Compared to transmission 70ms
35 ms, according to the DJI website. For reference, DJI Transmission is 25ms in low-latency mode, and analog is as little as 12.
No words on compatibility with the DJI Transmission ecosystem (and also confusing to feature the Inspire 3 on this promo video). You can do better @DJI !
There is, you just didn't bother to look it up.
From the DJI site:
"Can I link DJI SDR Transmission with DJI Transmission?
No. Furthermore, if DJI SDR Transmission and DJI Transmission are used at the same site, it is crucial to ensure that their central frequencies do not overlap.""
@@joelmulder where did you find this? I have read everything on the DJI site, product page and store page plus the FAQ and there is absolutely no info on this. Assuming i didnt bother to look was mean bro, chill.
@@orfeaskalafatis product page spec sheet and FAQ.
👍👍