The DIYPC Q3 Case Has FLAWS You Need to Know About
Vložit
- čas přidán 18. 06. 2024
- This video is sponsored by Brilliant! To try everything Brilliant has to offer-free-for a full 30 days, visit brilliant.org/NerdonaBudget/ The first 200 of you will get 20% off Brilliant’s annual premium subscription.
DIYPC ARGB-Q3 PC Case: newegg.io/41b603b
Official Nerd on a Budget Merch: www.bonfire.com/store/nerd-on...
Improve your Amazon shopping experience with VETTED today, use this link when installing to help support the channel (100% FREE)! bit.ly/3AguCmO
Check out products I use/recommend here! vetted.ai/creator/nerd-on-a-b...
If you're shopping for anything on Amazon or Newegg you can use these links to support my channel, it costs nothing extra to you and a tiny bit of help from a lot of people goes a long way:
Amazon: amzn.to/2acMPuf
Newegg: bit.ly/3hB8yKj
Timestamps:
0:00 - Intro
1:53 - Pros
5:48 - Cons
14:01 - Final Thoughts
Follow me on Twitter and Instagram!
/ nerdonabudget
/ nerdonabudget
Channel Music by ManKarate:
/ mankarate
/ mankarate1212
Mailing Address:
NEW (starting Dec. 2022):
Danny Le
12918 Mukilteo Speedway
Suite C-23 PMB235
Lynnwood, WA 98087
OLD (Don't send to this one anymore):
Danny Le
P.O. Box 2385
Lynnwood, WA 98036
Try Amazon Prime Free for 30 days:
amzn.to/2tTmwlz
Try Audible FREE for 30 days:
amzn.to/2tLohAU - Věda a technologie
This video is sponsored by Brilliant! To try everything Brilliant has to offer-free-for a full 30 days, visit brilliant.org/NerdonaBudget/ The first 200 of you will get 20% off Brilliant’s annual premium subscription!
i was wondering u mentioned that u could override the fans via motherboard software if the motherboard had 3pin 5v connectors, my mother board does but i do not understand how to connect the molex to the 3 pin 5v, could u explain that to me as i really dont want to spend more money to change the fans. my motherboard is asrock b660 pro rs btw
@@mich1904 The molex has to be connected to the power supply, not the motherboard. The additional 3 pin connector coming off of the case, that is what connects to the motherboard. Molex primarily is there to spin the fans, and the 3 pin to control the colors. If there is no 3 pin connected to the motherboard, then the molex ends up also powering the controller to create the rgb effects built into the case
@@nerdonabudget thanks man ill try this right now, im actually using this newly build pc rn, its running great and looks great, but it would look better with synced rgb.
@@nerdonabudget ok so the 3 pin in connected to the motherboard and the molex to power supply like u said, however it is still cycling through effects randomly, i even disconnected the reset button from the controller thinkin it would stop doing that, also what software do u think will control the lighting for the fans, currently i have the asrock polychrome software, however it isnt detecting the fans
@@mich1904 i’m wondering if you ever got a solution of this. I’m having almost the exact same predicament. I’m using an external controller that’s plugged into the motherboard argb header, and also have the RGB from the fans connected to my other RGB header on the motherboard, but I still can’t control them even with the controller’s remote, or with polychrome RGB. Are we supposed to remove maybe the white molex from the centipede chain? What’s crazy is that all my fans and devices are in sync, but I don’t have control of them, and even the ones that are completely independent, seem to be overwritten by the case?
I wanted to do some background research on this case and I'm glad you did all the heavy lifting for me. Thanks Danny!
yooo no way scatter volt i love ur vids wasnt expecting to see u here
I mean it's a cheap 011D mini. I agree with some of the cons but really can't complain with the cost cutting measures for 2 glass panels and a dual chamber case. Nevertheless, thank you so much for going over this case! I've been looking for a good review on it!
Definitely 💯 helped! I went with the green/Mint version of this case! For the price you can’t go wrong. I did end up going with 9 fans from a different company and that company’s controller instead just so it was maxed out with cooling and lighting ! I also went with the same white theme for coolers and fans as well! I did all white cooler and white housing argb fans ! I will show a update as soon as the rest of the parts arrive! Waiting on the new CPU , Ram & SFX FULLY MODULAR psu comes to get rid of the non modular psu out as well as the sleeve cables I went with! Thank you for your review 😊
You could give that pc to Meg since that she’s been hanging to your LAN parties often
I have been seeing this case on newegg and thought about it for an HTPC build. I was thinking of an all intel with an I3 12100f and an Arc A380.
TY. Have black and white cases but I do look at pink ones on sale or consider painting a white one sometimes.
Does it always constantly cycle colours or can it change colour and have it stay as the colour I selected? Can it do this with its given pc fan controller?
THANK YOU!!! I am also scratching my head on the fans. Mine has the 3 molex but only 1 fan (rear) has the argb 3 pin...is this right? Havendone the build...waiting on mobo
I've recently seen the fractal design focus 2 rgb for $54 after shipping on Newegg, that seems like a steal tbh
At $65 this case is a steal! I just don't understand the obsession with building cases in this CUBE like dimension.
Have you not seen the height of air coolers these days?
Thank you, Thank you, Thank you for this review. I am glad that I passed up on this case for my main gaming rig, and instead just bought it for my mid-range "back up" rig I'm building with spare parts. You are right, there were so few vides talking about this case in depth. I just subbed.
kudos. was shopping and came along this pc case. thanks for the review man. newegg shipping to canada is high af.
Thanks for the video. Could one use a small AIO with this case? Just bought a i5-12600k for a Plex build and curious if a small AIO would work with the small space.
how did you connect the pwm id cooling 214 cpu cooler to the molex is there some adapter?
Great video! This helped a lot! I'm currently building a budget pc and really like the sky montech two and lianli look but both are kind of expensive! I saw this but after seeing your review I will probably not get this case because I do care about the air flow and rgb. Again great video!
thanks for showing the case but is there a link for the corsaihair controller you used??
Just bought one of these cases for my roommates build. Hope it goes well
Can the case fit a normal atx power supply or do you need to buy a micro atx psu
Here in the UK at least, there are now other companies selling similar cases to this without fans and with (hopefully) better fans for generally affordable prices
Just so you know Ionz is the trading name of DIYPC in the UK so the Ionz Dual Dynamic is this case.
@@FoxDrenoh I didn't know that
can you use a vertical gpu if it fits? just wondering?
Danny I do not think you know but even the more expensive beQuiet! Pure Base 500DX and FX have the same mounting method for the TG side panel.
So what case especially in white do you reccommend?
Thanks for the video you saved me from buying this maybe!
🤔Interesting and at the same time a bit confusing for me that especially in North America so many PC builders are so interested in absolute budget cases. I currently own 3 ALL AMD systems myself and with a rather average income of 1500 € I still used a real Lian Li case for all 3 and have always handled it like this before 😌 of course I won't use an O11EVO for the 2 and 3 system 😌 But it ended up being a Lancool II Mesh and a Lancool 216. One of my rules is never skimp on the power supply unit and the case, one ensures the system has a solid power supply and in the other I have to be able to work and build sensibly and nowadays also look at it every day, which is purely aesthetic but an important point. In addition, cases from brand manufacturers are not much more expensive than the low-budget compromise solutions, as you can see very nicely with a Lian Li Lancool 216. For around €100 or a little over $90, I think you get a lot with very good features 🙂👍🏻👍🏻
Yo bro do you know if it can fit a 360mm radiator with 3 fans? It says on the website it cant but it can fit 3x120mm fans? I dont get it
Have you guys checked out the sama ar01 argb case?
Nice case Danny!
How did you get the Rgb fans to turn on? Idk how to get the Rgb fans on
I got that case once and those fans cables started to melt and smoking when I powered it on. I immediately removed them and swore of ever user Molex fans EVER again.
yo btw for new buyers the case has changed i recently purchased this case and there is no annoying line going through the 2 of the tempered glass panels its even more simular to the lian pc case
thx for the update bro i got nervous cuz i just ordered it
@@GabeN-br6kk np btw the rgb is changable using certin rgb apps like signal rgb so u can custimize the fans and stuff
Id say the best way to make it look good and perform well thermally would be to have a backwards mounted CPU cooler and using the rear fan as intake. That would balance looks and performance depending on what cooler you get.
When i bought mine i cannot conrol the rgb of the fans AT ALL there is one cable coming from each fan and its a four pin connection that i have never seen its not the usual connection.. i didnt even get 4 pin molex connections
So, how do we stop the fans from cycling through? We just buy a new set of them with a rgb controller?
Will it fit an atx psu?
Montech Air 100 ARGB doesn't look as good, but it does have better ARGB control and Cable Grommets and has been around $60 lately.
That's the one I got, it's pretty good. I'm using a stock AMD cooler and that and the included fans keep it breezy without being annoyingly loud. I like it a lot, I'm deciding between buying another or this case for a family member.
It looks like a crappy cheap case the price makes sense
The fans are the only bummer that would honestly bother me....I wanted this case but it was always only available thru back order...I would likely either get a different controller or different fans
just reverse the two fans polarity
@@clutchtomcat2498 I was referring to the rgb aspect...yeh I'd definitely reverse them
How did u change the colours of the fans. I have the exact same case but in black. It only had power switch and reset switch on top
in the case it should come with another cord that has a blue tip that you need to plug into your motherboard and if you have a rog or a compatible motherboard you can control the fans in armory
If I want to connect the RGB fans to the motherboard, do i still have to plug in the molex connector?
No the fans should have on the top left one the only exhaust it should have one small cable for the motherboard plug that one into the motherboard
@nerdonabudget what cpu fan did you use and how did you make it sync with the case fans?
ID Cooling SE 214XT amzn.to/3D8HTRE I hooked up the 3 pin connector from the cooler fan to the 3 pin connector that are linked to all the fans on the case so then they all sync together with the built in controller
Like this case! Don't like molex! I think most can live with the thumbscrew glass panel, but the lack of a better rgb controller will make me reconsider a more expensive case. I really wish it had usb and audio access on the front panel though. But no one can get this look for the budget it offers.
if your motherboard has 3 pin argb header It's a good deal
1:39 damnit Danny lol
Hey Bud can you put a 240 water cooler on top?
None of the cons are big deals for me, I just ordered one. Went with the green because it's the cheapest option, $50 on sale right now, and it's not white or black! I don't have anything about white or black cases, but seeing those colors almost exclusively for twenty years now, they're kind of played out. I have extra fans and controllers already, so that part is a non-issue for me.
I'm kind of with you on how they mounted the glass panel, but I don't think it's that huge of a thing. Heck, my current case, a wood one, uses _eight_ screws on the side panel that you have to undo every single time, even to access the PSU switch because it's internal.
Now let's just hope it gets here in one piece.
Bought this one in black, looks great but i agree with your criticisms. I got it for $60 after tax and shipping, and i ended up buying a kit of 3 argb fans from thermalright for an extra $15 shipped. Overall the included fans really are a buzzkill, since theres so many case options for around the same price that have actually good fans pre-installed (like you mentioned in the video). I probably won't buy a case like this again, but i really do like the form factor and design.
thats unfortunate, I like the design too, but damn the molex and fan hub not working well throws it off for me.
@@Random-ed2xf It is very easy for sure, you're not wrong about that, but buying a separate fan kit adds 15-20 dollars to the price. Then you're looking at around 83-88 dollars total for this case and fans, and at that price point it's not very good value anymore. There are better cases that require less work in the 80-90 dollar range.
i mean you can reverse the polarity of a fan fans can blow both ways
@@mannydcbianco any good case recommendations?
so the two fans that are exhausting instead of intaking you can just reverse the polarity of them to make them intake so you dont have to physically swap them its pretty simple just swap the negative and positive wires
I think I can overlook the flaws when its that pretty. Great vid!
Mine came with 3pin power and 3 pin argb both have daisy chains and all worked fine. It seems there is some variance in what fans people receive.
Thats also what i got
I've done a couple of builds in this one, it's a good deal at under $60 but frankly over that and there are higher-quality options. I do love the concept of a MATX O11 clone. But of course this is a cheap, relatively low-quality case meant for budget builds.
The RGB control is definitely disappointing. It's fine for a new user who's unlikely to care or fiddle with it too much, but for anyone who wants real control, it simply isn;t good enough.
It's a good option for flips, overall, simply because of the price.
Any recommendations on budget cases, especially in white? Micro atx prefered!
Dumb question but can you use a traditional atx psu or do you need a small sfx type psu
Did u find out?
No but I think you can
I've used this case three times and two of the times I replaced the fans since when I tried plugging into a motherboard I couldn't control the RGB. Also I used the 9 fans I had from the three builds in one of the cases and it's hilarious
Were you ever able to get the RGB to work? I just set up this case for my daughter, and I expected there to be the difficulty with the fans and RGB… But even after plugging in through a controller to the motherboard, they still continue to do the cycling thing and polychrome can’t take over. Was I supposed to remove a connection or a molex or something?
@@rgracon never. I ended up replacing them with thermalright RGB fans since they are like 5 bucks a fan, work well and can be controlled from motherboard or external controller.
@@joelm-e1084ok, thx
The V2 went to a slightly better controller, The DIYPC ARGB-Q8 was also quietly upgraded to the slightly better fans as well. It seems they are phasing the Molex crap out of all their cases, But going back 5 years ago I was getting cases from the same brand, at the same price point with real 6 fan controllers with remote and 5v passthrough. So they just went way backwards, just to realize they cheeped out to much and trying to find the "acceptable" line with corner cutting. So the v2 is better, but I've seen better from the same company.
I am building my first build in this case soon. Everything that I’ve seen mentions how problematic the molex fans are. Are they really that big of an issue or are they still pretty easy to install?
How was the pc build process? Any problems you had to deal with and how’s it holding up
@@rajvirsanny8592 The build process was simple and everything went to plan. I used 2 different tutorials to make my way through. It’s holding up well and working perfectly.
@@collinwitte6387how did you connect the fans
I just purchased this case for a budget build. The rgb also constantly cycles.
I installed signal rgb and can control all 3 fans fine. I don't have molex fans though just 3 pins power with daisychain 3 pin argb
There's the gamemax infinity for $72 which is a bigger version of this case (also got inspiration from the same lian li O11 dynamic) that supports up to 10 fans and a 360mm aio. I just built my pc using this case.
Yep I was playing on using that case too.
it has no fans+it doesn't cost 72 normally
Gamemax Infinity
Ionz KZ-Z Dual Chamber
Check these out if you're interested in a budget "011 Dynamic" style case.
The newest version of the case can stick to one color with the exception of the rainbow mode, additionally they fixed the new fans to be a standard 3/4 pin and sata rather than Molex
I just ordered this case on new egg last week. Is the newer version standard, or is it a completely new model?
@@elliot_alderson75 I did it from their eBay and my case was slightly different than others I’ve seen. My fans weren’t the old Molex style and my pcie slot cover for the slot one was also included in the box.
Both panes were also seamless unlike the panels some in the comments have said
@@elliot_alderson75 on eBay it’s listed as DIYPC ARGB-Q3.v2-W
@@CollectingWeeklyhow are the quality of the fans? I'm thinking whether I need to swap out.
You mentioned the panels are seamless? You mean the glass panels?
i am currently building a pc with this case and am having so much trouble with the fans, is there any way you could show how to connect the fans so rgb works
did you figure the rgb fans out? i cant get mine to work.
Did you figure it out @@owenjohnson4965
Has anyone been able to figure this out? I’m trying to reroute the reset button to control the rgb
this is the style of case a lot of prebuilds are moving to. as for fans I'm going to have a radiator there anyways. im going to use the biggest liquid cpu cooler I can in this case lengthwise, so it cancels the fan issue out. as for the way the tempered glass was mis mounted i had a panel just spontaneously explode in my hands. that was mostly my fault. i was just too lazy to do cable management and had to buy a new case. the case on my other computer had kind of a lip on the glass that catches on the metal fame then 2 thumbscrews on top. it's still an old design and that case isn't made anymore. so, I didn't have that issue. las i saw it i saw it for $!5 and it had bad reviews but i haven't had any major issues.
the best budget case I've ever seen is the Tecware Forge M2 air. Basically a clone of a Meshify mini with shitty ARGB fans for 39.99€. Sell the fans for 10€ and get some P12s and you're golden.
how did you connect the cooler to the rgb i cant find where to connect it
did you figure it out? im having the same issue
@@owenjohnson4965 just bought an rgb hub lol
Almost bought this case but some guy sold me a silverstone ld01 for $20 brand new
😲WOW! what a bargain
The case seems to offer a good space design, but some of the includes seem to be lacking
This case is selling like hotcakes cuz ppl really love the O11 dynamic design
do you think a 6800xt will fit comfortably in that case?
Easily
Understand the glass mounting due to recycling an old case design, but the controller and fans are a whole other issue. I think the DIY PC building community as a whole has increased expectations for case features while not wanting to pay more for more modern tempered glass and rainbow unicorn case options.
can it be used for a mid tower atx motherboard?
Idk I had the same question
@@igotthisgamerkid2548 it is a micro atx case so it wouldnt work with a big atx mobo
Anyone got the V2 version
This case being cheaper than the AP201 is crazy... even if the fans are cheaper than my ex wife.
Despite the horrible RGB controller, I like this case. It looks good, the fans themselves work, and this makes any build look better. I can deal with the niggles, I build something it stays that way (as in I rarely if ever open it up again). I get the points you've made, but for most folks it's really not that bad. Monotech cases were my go to for flips...but I hardly flip anymore so something a bit above that for myself to use is what I'm after now. Good review s always Danny!
What so hard to change molex to 3pin?
I'm pretty sure the frame side of PC fans is always the exhaust side
I wish it was sold on amazon
G'day Danny,
It does seem to be the way where you find a case that you really like the look of at an affordable price & there have been some annoying corners cut to get there, with some of them like the side TG mount just making you go ???🤷♂???
Ps we spoke about you getting video sponsors to help support funding content in Livestreams & I think Brilliant was a very good choice.
It is not only inline with what you hope to achieve with the channel educating about PCs, but Promoting Real Educational Content is very important these days with so much misinformation/Blatant Lies to push a narative or to scam people using Social Media & the Internet.
Bro... U blew my mind with the resert buttom lol My fans the cycled. I sacrificed the fans to science lol
i prefer the Montech Sky Two.
The kiediers one mentioned in tech sources 800$ pc is pretty good too
I'm using that case too
Bro $70????
I can get that case $35 fans included everydays in my local market but in Southeast asia
Which I already have one using
BTW TO NEW BUYERS THE CASE HAS CONTROLLER AVAIBLE ARGB U JUST NEED TO DOWNLOAD SINGNAL RGB FOR IT TO BE USED PROPERLY WITHOUT BUYING OTHER THINGS
How would I do this?
KEDIERS PC Case - ATX Tower VS DIYPC Q3?
Nope it's a fish tank lol
Who knows how I can’t change the rgb color?
Can anyone tell me how to get the fans to stop cycling through
You have to buy a separate RGB controller
Oh ok thx
@@nerdonabudgetcan I ask which one you used since idk which one to buy there are cheap $10 ones then there are $40 ones
@@sinceredtb3227 the one I used was from an old cooler master case I had on hand, any of the ones on Amazon can work. Just to make sure though, does your motherboard not have a 3 pin ARGB header on it? which motherboard do you have? if it has one, then no need for a controller
@@nerdonabudgetI have the asus b450m a 2 can you tell me if it has it I think it does so would I just have to hook up the fans to that
So you bought a cheap knockoff case and they sent you a cheap knockoff case.
You wanna see flaws. Look no further than the Hyte Y60. Glaring flaw #1………Vertical GC mount way too close to the glass. Glaring flaw #2……….can’t use full height cards. Glaring flaw #3……….USB ports at the bottom of the case (bye bye usb stick). Glaring flaw #4………..terrible airflow.
man wish they sold the 210i
I think the Pink version is 55$ so you throw in few Arctic fans and be happy.Seriously though , you comeplain waaay to much .
Pointing out flaws that might affect people's purchasing decisions is complaining too much? Didn't I still give it a generally positive review by the end of it?
@@nerdonabudget
Some of those "flaws" seem Like a nitpicking .
Inventing flaws .
Or such was my impression.
But yeah,you did generaly give it possitive review.
Overal video is good enough for me to recommend it👍
I mean like its not bad for 66 bucks
Brooo @1:39
Am subscribing my names Danny too
I build and sell PCs as a side hustle, and I am right now building one in a DIYPC case and the fans are just like the ones in the case in this video connected through molex, and they are AWFUL. Worst fans I have ever encountered in a case. Absurdly loud, and you of course can't control the speed nor the RGB. And for being as loud as they are they don't really manage to move all that much air either.
I will never buy an entry level DIYPC case ever again. I'll stick to Sama, Raidmax and Gamdias and the like for my affordable builds (which are by far the ones that sell that fastest). None of the aforementioned cases are great, but for the same money (40-65 dollar range) they are in my opinion much better than DIYPC cases.
Your fans are backwards there's no intake
Did you watch the video? I'm well aware, 3:23
what is new with the Nvidia shill?
Oh you know, simping for Nvidia like usual
This guy is the opposite of a Nvidia shill. He promotes buying cards that are good for value especially used AMD cards. Stop being a hater
What's up with this brain dead in the comment sections
@lakaymark
@@nerdonabudgetdon't waste ur time on this brain dead mother fuckas
@@fahimchowdhury5900 It's a joke from last livestream
Why does your voice look like 🤓
This might be old news at this point, but there’s now a version on Newegg that doesn’t include the fans for $53. I’m building my first PC and I’ve been considering this case, so this video really helped me out:)
idk that much abt PCs and im planning to get this case but im pretty confused on where the PSU would go?