Transparent Steam Engine (3D Printed)
Vložit
- čas přidán 23. 05. 2024
- Get 60% OFF your first 4-bottle box bit.ly/BrightCellarsIntegza for just $38 plus taxes. Bright Cellars is the monthly wine club that matches you with wine that you’ll love. Get started by taking the taste palate quiz to see your
personalized matches.
3D Models:social.thangs.com/m/40503
Follow me on Instagram: / integza
Support me on Patreon: / integza
Paypal me:paypal.me/jgomes1992?locale.x...
Discord: / discord
Reddit: / integza
#engine #steam #3dprinted - Věda a technologie
You could create a "C" bracket that goes from lid to lid that clips over the ends of the cylinder to hold them in place.
My exact thought, glue isnt always the answer. :)
I would add a flange to the end of the cylinder and the rim of the cap that allows them to be clamped or bolted together.
or make at atmospheric engine, and let the vacuum suck it in place
Or a zip tie.
Every engineering problem can be fixed with duct tape, zip ties, WD-40, a hammer, and an oxy-acetylene cutting torch.
There you go ;)
Now I want to see you 3d print a steam whistle
Yessir
Yessir
Yessir
@@dr.klopper960 chooo-chooo train !
i think you are wining a 3d printer
For a next video, how about building a ramjet engine using some kind of compressor or fan to accelerate the intake air to high speed?
Love your work!🤩
Fun project! I always enjoy your videos, you always have a creative solution to thorny problems.
You can get much better performance from your engine if you lubricate it. Steam engines used hydrophilic oils that would actually be carried by the steam into the cylinders. If I recall correctly, animal fats (tallow) are particularly suited. The engine will also perform poorly when cold and uninsulated. You'll lose tons of power because it's all used up when the steam condenses back into water in the cold cylinders. Harvesting more of the steam's energy as it expands gives you the most efficiency (compound engines do this using cylinders of varying bores, high pressure cylinders have smaller bores than low pressure cylinders after them).
Video idea: Since you've never done anything that flies, why not make one of da vinci's flying machines.
Tomatoes are disgusting!
Congratulations, you just won a 3D printer! Send me your info (Name, Address, Zip code, Phone Number) to integza@gmail.com.
@@integza Feito
congrats on ur 3d printer man.
@@integza Maybe you could try to 3D print a triple expansion engine?
@@integza you sound like a bot
Video idea: create a 3d printed DC motor to use as a pump for one of your rockets, which would allow you to explain a bunch of different physics concepts, maybe a DC motor with Bell electromagnets
Nice
That would be cool
smaller electromagnets so its more compact
Wonderful project! 👏😌
Love you’re videos
Now I know why I was sent this video. Thanks Mars.
Make a steam powered nerf gun
Yeah😂
No
Petersripol?
How does that work?
@@Catherine-tg3zdidk it winds up a plunger or something
How many types of engines have you now built, Joel? 😂 Great vid!
Answer: Yes
A lot , by lot I mean a lot
alot
Wait his name is Joel? I have the same name too
not enough
Video idea: It'd be neat if you created a methane powered internal combustion engine, and then power it with methane derived from decomposed tomatoes/another source [as noted by Dan] or something like that.
I ran a 2 stroke off ethanol I made once, it's very posible
I suspect the acidity of tomatoes would make methane production (or any other decomposition) difficult.
@@danb4275 Yeah that may be so, but that was mostly a joke in reference to his distaste for them. Maybe he could make it from another source... or just buy some to cut some of the trouble.
Your Channel/Videos is so underrated. Very fun and informative to watch!
Amazing channel! Really fond of your narration and innovation! Lots of good wishes from the Indian Himalayas!
Video Idea! Steam Powered Radial Engine!! I would love to see how it would work and I know you can do it!
and with an actual boiler this time, not just a pressure cooker lol
You mean like what I suggested two days ago??
@@edwinvanderhulst7703 ouz wq
I forsee a 3d printer in this mans future
@@duelpistolbro3175 I wish haha
VIDEO IDEA
Produce biodiesel from used cooking oil and propel a rocket loaded with tomatoes to infinity and beyond! 🍅🍅🍅
You can get more pressure without changing the boiler. Just superheat the steam coming from the pressure pot by passing It through a coil that your heat up with a Torch, or that more generally passes through something hotter than 100°C
You should try and make an engine that runs off of a weight on a line attached to a gear ratio along with the steam engine idea, just to give it a little kickstart and help it run better while under load.
Hi, steam locomotive engineer here, and I noticed that while your steam engine does work, it's quite inefficient, and has some potentially fatal errors. First of all, there's water in the cylinder, and this comes from using saturated steam. You could superheat the steam if you wanted, but the most simple solution is to add what are known as drain cocks to the cylinder. Basically, they're valves that you open for the first few strokes of the cycle, to allow the water to drain out. Also, the valve and it's timing, while useful for a simple engine, could benefit from being adjustable. Something like Walschaerts valve gear or Baker valve gear, with a "cutoff" to allow variation in the valve timing, and making the engine more efficient. Also, it seems to leak steam everywhere... I don't have a solution for that one, so just go with your gut on that problem. One thing I'd definitely suggest is getting a dedicated model boiler, like a Wilesco or a Mamod unit. Hope this helps!
I also noticed that there were no piston rings on the piston. With the heated steam, I'm wondering how much blowby he was getting with everything expanding. Though the cylinder doesn't seem to hold much pressure so rings would pose an issue. You would need to solve the issue with containing pressure or design a piston that uses a lubricant as a seal rather than a mechanical seal.
Like the rocket engine, you should try to measure useful work of this engine and then tune it as Mike G suggests.
@@DeeEhm graphite is an excenent dry lubricant, although I don't know about it's efficiency in a very wet environment. Maybe something to consider?
this comment section is filled with people I admire
I don't think he was trying to make the best one he could, he just wanted to have some fun.
@@kingsummit5310 graphite gains a lot of friction in water. It turns into a thick paste as well.
Using alcohol in a steam engine sounds like something I would suggest💣🔥
Have you heard of NAPTHA locomotives!
I would too 😂😂😂
that just sounds so ridiculously dangerous and fun at the same time, as it boils at a lower temperature does that mean you can get higher pressures?
@@Anonymouzor yeah but the temperature will increase with the pressure and ultimately lead to a spontaneous combustion because the ethanol is lighting itself up, wich would be very very dangerous. Since it is hard to controll this system so that this doesn't happen, I would not recommend to try this at home.
@@draco5991rep it was a joke dude. You didn't see that he had a bomb and fire at the end of the comment. Everyone knows that this would cause a catastrophic explosion. SMH just about every one of the comments related to this were sarcastic not serious.
As a businessman, I respect the effort to return to the classics. However, I would recommend producing a better steam production device, to hopefully make the system more mobile.
Video idea: Build an steam engine with four or more cylinders and a crank shaft, and messure how many horsepower it makes and perhaps make a vehicle out of it ;)
P. S. Keep up the good work:) love your videos:):)
never knew a person could fit so many '':)'' in one comment.
maybe the real problem of steam cars is efficiency and water recovery. so i presume they'd need high steam pressure at first. it's better to have a steam air-compressor etc... compressed air'd be good to recover water also.
@enriqueamaya3883 it isn't religion. it's a science question.
Video idea: have a steam propeller engine for a model airplane(to have it portable use the hydrogen and potassium permanganate mixture, and they could get mixed using syringes injecting the mixture. You could use the same method as you did for the Devil's Toothpaste Rocket Engine that was mounted on the skateboard?)
@integza if this person doesn't get top comment I still want to see you make something similar this.
Now that you have a steam engine, wouldn’t it be cool to make a little steam powered car? Or a locomotive?
When you said keep going my boy it made me smile. Because as a fellow engineer I understand how good it feels to succeed
Would love to see a second steam engine video only this time print a liquid escape valve to when the liquid cools it returns to the pot making it a closed system!
you can transform a fog machine to make high pressure steam. I already put instead of fog liquid, water. I've already tried this and it really works because the machine has a mini water pump that generates a considerable pressure and when the liquid goes to the heater it boils instantly which almost triples the original pressure
Just use distilled water if you do this,. Or you'll clog your boiler tube with minerals.
You are using it like a flash boiler.
Fluid doesn't flow to higher pressures. For example, in a liquid rocket the fuel pumps generate all the pressure of the exhaust, the combustion in the combustion chamber just increases volumetric flow rate.
neat
How?
Video Idea: I would love to see projects done with recicled/scrapped electronics so people like me that lives in countries where getting some products/materials is expensive or impossible can learn and do projects from your videos! :)
I second you on that
While we're at it, let's make this the most liked comment so this guy gets a 3d printer
No, we need the Styropyro x Integza collabo! Crazed Laser Maniac x Crazed Tomato Hating Rocket Maniac!
(No hate but)How did you hot a pc?or a Phone?
No the real collab we need is Tom Stanton, Styropyro and of course Integza! Engines, lasers, and rockets!
Hey Integza, steam jet ejector for vacuum generation is one of the most interesting devices I encounter in the industry which has no rotating component but has a unique geometry that allows it to generate vacuum. Can you make a video about them. Maybe modeling and printing different geometries and comparing the vacuum generated would be interesting!
To keep the caps on without glue: A c-shaped bar (3d print it) that runs lengthways the cylinder with the folded ends holding the whole thing together.
Maybe you could make a potato cannon with alcohol Mr Inetzga!!!😉🙈
Love your videos! Technically two video ideas; First make a parabolic mirror reflector, Second use said reflector to power a solar powered heat engine (similar to your steam engine but modified in a few key ways) to go from sun to motion with very few steps!!!
UPPPP this one would be sweet!!!
This would be cool to learn about!
Bonus points if it's a Nitinol engine
@@LDSG_A_Team True that! hard to make but not expensive
Video idea! Steam powered micro generator to charge a cellphone. Maybe take it one step further and make some sort of multi-cylinder version.
2:42 goddamn this takes me back.
Good ol' ASDFMovie
Ive been watching you for a while now Integza, and I just wanna say its awesome to see how much the production quality of your channel has gone up! Loving it man keep it up
Integza! I've spent the last 8 months trying to design the world's first 4 stroke compressed air engine, an I finally have one that works! The problem is it runs like crap and is less efficient than a 2 stroke alternative! I challenge you to improve it!
UPPPPPPPPPPPP Great idea!
How do you even do that?there’s only 2 cycles with pressured air
@@pubz2288 You have a separate camshaft with a 2:1 ratio that opens the valve every other stroke, just like a car engine
@@AxelDayton But why? No need for compression cycles in a steam engine.
You improve it by making it a two stroke - air doesn't explode, so there's no point having a compression/ignition cycle. You've invented something that automatically has half the efficiency (your 2:1 camshaft is the clue).
What a nice little video, much appreciated!
video idea : you should make a gun and bullet with as much 3d printed part as possible.
I'd love to see a second stage to this making a compound Engine.
To improve the efficiency you could try to improve the seals.
I'd love to see a triple expansion steam engine, or steam turbine after this! Maybe even poweing a small boat if possible?
very nice mate, Merry Christmas all the best to you and your sister
Idea: you could also make a steam generator similar to those found in doble steam cars, that way you can make more consistent and longer lasting power.
Can you 3d print sth. to genereate electricity from ocean waves (you could try it in a water container with artificial waves)
Video idea: seeing your interest in engines i cant help but think of a transparent gas turbine engine. Try it please.
hows about using a Nalgene bottle as it can sustain tonnes of pressure
Wow, that was really cool! 👍
If you make the piston bigger it may help because you need less supply pressure but more volume of steam.
Another great video 👍
You should definitely try making a stirling engine. Almost like a steam engine but it runs on air contracting and expanding because of temperature. And you liked engines, right? Great video!
I'm pretty sure he already has... But good idea anyways!
He has already done it
He kind of did but I meant like the ones you can just put on a cup of warm water and they start turning.
6:20 You could have made the base come up at the ends of the cylinder to hold the end caps in and still be able to dismantle it.
the asdf spin off... brilliant :)
Nice info, thank you:)
I'd love to see you build/ 3D print an entire steam locomotive, incorporating your cylinder/ engine
You need to superheat the steam as it comes out of the pressure cooker, so you get dry steam, it will also increase your pressure as well. Run it thru a copper coil with a gas flame heating it.
Thank you for sharing!
1:10 why did I expectated the bottle to explode
Create a Turboshaft Jet-Engine with a small Helicopter-blade, to measure how much force you can produce, or maybe take off.
Video idea: I think the natural continuation from steam engine is to build a Stirling engine. Those are much more interesting than steam engines, but quite as easy to build. Furthermore, there is at least three main types of Stirling engines to choose from.
Your really good at replicating engines, I'd like to see what engines made firstly by you would look like, like the Wright brothers.
Perhaps you could try and combine all of this in to a simple steam powered helicopter or plane? If you could make a radial steam engine that'd be perfect and look so awesome too!!
You can 3d print RC boat
I would love to see how much power you could generate with that. Even if its a low efficiency of 1%, gives you something to try and beat in future versions!
as a fan 3d printing, and aerodynamics, I'm most interested to see what you do when it comes to designing a glider :) if i had a challenge for you i think it would be cool to see you come up with an omni directional wind mil that can charge devices. and be, kind of... portable ;p
Look up the Doble steam cars. They generated steam in about 90 seconds by using a containment vessel that used copper tubes that were heated up. Basically instead of boiling a large amount of water at once Doble steam cars flash boiled small amounts of water quickly. The idea was to have the water pass through the tubes and have the heat of gasoline heat up the tubes and turn the water to superheated steam. Jay Leno explains this. It’s kind of how tankless water heaters work but it’s much more powerful
I think The Napier Deltic engine would be a cool 3d printing project for you! I’ve always wanted to see one built! Thanks for all your awesome content!
that might be cool
I’m dying to know why you shouldn’t drink rose wine in Croatia! 🤔
Edit: Is that a Bowden tube you’re using to get the steam from the pressure cooker to the engine?! I would never have thought that would work. You’re really good at this.
I want to know as well.
I would love to know as well.
As a Croat, I really want to know what's up with rose wine in Croatia!
A future Idea - Making use of all your previous projects to do a Over the top fun video about the Destruction of the Hated Tomato . in which you use the previous projects as a way of destroying the unloved red fruit. maybe a good way to start off the 2022 period.
for anyone who really wants to find out about how steam engines work heres some differences between this engiene and a normal stream engine:
1. normally a steam engine has a much thinner piston
2. that design of piston is designed to be used with a o-ring
3. most steam engine will not use the flywheel for the valve timing. early steam engines used a round peice with and eccentric hole. later engienes used complicated systems that would take far too Long to explain in a comment.
4. most stream engines will use a slide valve and a steam chest. the steam chest is filled with steam/air and the slide valve moves to allow steam/air to flow into one port that is uncovered and connects the other Port to the exhaust hole.
5. alot of engienes use crossheads and crosshead guides to keep the piston rod from bending
ofcourse there are exceptions however this is true for the majority of engienes
Integza, longer videos please. Watching them is a constant reminder of how much we hate tomatoes and it's an escape from their disgusting grip.
I would suggest making a TOMATO throwing trebuchet powered by rocket engine !!! if you are able to make it ofc....
Great job dig your teaching style. I know it sounds crazy but what about the time cameras. Like in the cowboy days. I always wondered how it was made
Great work.🎉
I'm not 100% sure how you'd do it, but a steam or compessed air powered plane/ flying machine would be a really cool concept to try to make
As user C Moore mentioned, a steam turbine would be great! Just to see how much power you can harness from a particular heat source. Either run a driveshaft directly to a vehicle or turn it into electricity with a generator. Messing with the drive shaft gearing or the shape of the turbine blades could be fun trial and error.
So interesting to me how big a role steam plays in our world. Almost every way we have of generating significant, consistent, reliable power is through steam. It feels like we're stuck in a rut somehow maybe? We literally split atoms...to boil water. Nuclear energy is just boiling water with extra steps.
But, those old steam locomotives are such masterpieces of mechanical engineering! Animagraffs has a great video on the "Big Boy" steam locomotive. Really made me appreciate the all mechanical design of it.
You could always add a little sewing machine oil to the cylinder to reduce the friction and that would probably make it so that it's less likely to jam or blow one end of the cylinder off.
You should try redesigning and building or just making your own version entirely of Nikola Tesla’s peace ray or death ray to melt a tomato. That would be super awesome to see what you could do with that! For anyone that doesn’t know Nikola Tesla tried designing a defense weapon that directed charged particle beams.
Love your videos!
Video Idea: Take a page out of real steam engine history and attach a second, low pressure, piston to this one’s exhaust to scavenge the remaining power.
Titanic used this plus a steam turbine and that worked well for 100% of it’s operational life.
i heard it never needed maintinence once. insane!
Titanics operational life isn't a high bar to beat
@@tobiashegemann1811 thatsthejoke.jpg
I mean, Titanic only operated for a couple of days on its maiden voyage, right?
Total off topic: your lighting in these vids is excellent.
Your video has really entertainment us, keep fun in the videos.
I'm so happy I found this channel! You've definitely earned a new subscriber here
You should 3D print a quasiturbine engine and make it compressor powered to see how efficient it is.
Your videos are so cool and I love your videos ❤
You could use this concept of printing the engine from plastic to build a steam powered piston-propeller driven airplane if you can figure out how to lighten the steam production mechanism. You could try just a metal cylinder with candles underneath maybe. I have a feeling just using a steam jet to power the plane would probably be more efficient, though.
When I said your channel was picking up steam, this... isn't what I meant haha.
I'm not complaining though - this is great!
You should build the entire train
I think that's a little ambitious
@@tambienbuscotrabajodeditor5584 yup
This just reminded me that i always wanted to build an RC Steam Engine Boat es kid... i never had the materials and skills, but maybe i could do it if the engines are printable
Can’t decide if Integza is a engineer or inventor. Either way he’s pretty much a genius.
Make a steam-engine that, runs of the smoke from one of you'r old rocket engines.
a *smoke* engine!
@@bluesillybeard haha yeah
Since you getting into aircrafts how about building a airship that is powered by an engine turning a propeller e.g. a two stroke engine powered by a small CO2 tank?
On a airship you don´t need to worry about weight and lift as much as on a plane because you can just make the body of it bigger.
And Helium is also pretty easy to get in vast quantities (the one for party balloons).
Of course you could also use hydrogen that you produce by electrolysis but that is a little security risk...
so it would be perfect for you.
You’d better never drink à red wine with this color. A frenchman advice.
I used to have a hard time with the acted-up "don't care about understanding the phenomena, I'm only in it for burning things" attitude that I seem to perceive in your videos, but you really do a great job. If yoou had explained a bit more the equation you showed I think I would have subscribed :P
I'd like to see an opposed piston engine, as I've only seen a few pictures of them & want to see you explain them to everyone. I'm not sure if you could engineer a steam version, but I certainly think It'd be an interesting project.
Cool idea :)
Good idea. I too have seen them where it looks like the pistons will collide in the centre of the block. Good idea.
Check out the channel Kurzey he made a compressed air opposed piston engine and his videos are great.
3d printed car
I would love to see some type of RC vehicle with a jet or steam engine!
These guy’s are making the prototypes in plastic and in the future there might be the perfect plans available,even metal 3D printer’s that just change’s the whole world.
[Video:] It's to late to suggest.
But a closed loop with HHO burner. Yes the burner must be enclosed in a wider part of the tube with a mesh to extract the heat. You should get enough heat from the burner to generate steam outside the main loop. Water from the internal burn can be collected in the downspiraled copper tube to the HH0 generator. If it's enough water it might rotate some 3D parts on its way down.
Ofc with a T-connection or weak points to release high pressure if there's an explosion 💥
Would love to see you attempt a 3D printed Ornithopter powered with a 3D printed engine of your choice!
You could try installing a modified version of this engine on some sort of (3d printed) car or even train with a pressurized container to power it. Would be cool to actually see this power a vehicle.
nice engine bro!!
There's another engine that works both like combustion engine and steam engine, it's called Stirling engine, and this type an engine uses heat so that the heat pushes the pistons in the cylinders, it is also maybe better than steam engine.
ᴄᴏɴɢʀᴀᴛꜱ ʏᴏᴜ ʜᴀᴠᴇ ʙᴇᴇɴ ꜱᴇʟᴇᴄᴛᴇᴅ ᴀᴍᴏɴɢ ᴏᴜʀ ꜱʜᴏʀᴛʟɪꜱᴛᴇᴅ ᴡɪɴɴᴇʀꜱ ꜰᴏʀ ᴛʜᴇ ᴘᴀᴄᴋᴀɢᴇ ᴄᴏɴᴛᴀᴄᴛ ᴛʜᴇ ᴛᴇʟᴇɢʀᴀᴍ ᴀʙᴏᴠᴇ
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^🎁🎉
Idea: make a powerfull enought steam engine to drive an rc car or so, with stearing and forvard/backwards gears and controll it via the remote. (for any improvements leave a comment)
Candle powered RC car :O
@@aurimasb1732 I don't think a candle can generate enought heat, but some electrical heater could do the job.
Increase amount of candles hehe
Project idea: Have you done a submarine? You could propel and control it with pneumatics (multiple co2 cartridges ganged together) so it would not need to be water tight. A balloon could be used to hold air to counter the ballast of the co2 cartridges.
Glass for a whoosh bottle. A 'working' steam engine from 3d printed parts, nice job.
Machined one of these in college as a project. Might have to try and print one now