2023-2024 KTM HUSQVARNA GASGAS 125sx TC125 MC125 Top end replacement rebuild series part 2. TBI
Vložit
- čas přidán 8. 09. 2024
- Showing how to set the deck height and check squish clearance.
Same process for the 250/300 just with different deck height which can be found in the service manual.
Join my Facebook group for more info and community sharing of information!
/ 709915283880183
Just checking, how would you adjust your squish if it was out? I’m
Picking not by changing the base gasket as that would effect the deck height?? Cut the head maybe??
Yes, if for some reason you had "zero" deck where the piston is dead even with the top of the bore when it's at TDC, and you do a squish test and discover you have excessive squish, you can machine the head gasket surface sealing area in a lathe and get the desired clearance. Keep in mind that the more material that is removed, the "less" volume you will have in the head so your compression ratio will go up. Your octane must follow and go up with the cuts. The larger the bore size the larger the squish gap is needed..rule of thumb for the 125's is about 1mm. Great question!!
Do you have a reassembly video?
Deck height should be set after the cylinder is torqued
yep, all good here.
Was there anything wrong with this bike or just doing it as preventative?
Just curois I have a few 23 husky 125s we have some stuff done to them and a stock bike but I was curois of advancing timing on them and I haven’t dug into them yet but do u know if there ecu drivin or will the stator advance the timing ??
Been pulling timing off the top and it makes more power
I have a 2023 ktm 125 TBI and i just did the top end. I did the power vale reset and i noticed that on deceleration/coming off the throttle the FI light will blink. But when I ride it normally/on the gas it does not. Suggestions
Did u take off the servo
We’re did you get the kit from for the top end
Im a Wossner dealer..
@@themotocrossmodchannelWulfMX I can’t find a top end kit for the 23-24 and if I do the weisco one only has 1 ring instead of 2 I’m wondering if that’s ok?
@@beckhambailey9348 If Wossner is out of them, get a Wiseco Pro-Lite 2 ring..call them for a part number.
@@themotocrossmodchannelWulfMX what size? 53.50 or 54? Or whatever one?
They only make one size for the pro-lite series.@@beckhambailey9348