GoingMake Woodworking Tools Black Friday Edition
Vložit
- čas přidán 15. 11. 2023
- Round 2 of tools from GoingMake. This is a new company but their goal is to make quality tools that the average woodworker can afford. So far all the tools I have received have been fabulous. Let me know what you think. You can find them on Amazon. Here are some links.
GOINGMAKE Woodworking T-Square 12 Inch
amzn.to/3sy00yy
GOINGMAKE Woodworking T-Square 16 Inch
amzn.to/47uQY4c
GOINGMAKE Woodworking T-Square 20 Inch
amzn.to/3sy8VQu
GOINGMAKE Woodworking T-Square 24 Inch
amzn.to/49ExFqX
GOINGMAKE Woodworking T-Square 32 Inch
amzn.to/3QHhalz
GOINGMAKE Bench Dog Clamp,3/4"
amzn.to/3SNMlxU
0:00: ⚒️ High-quality woodworking tools with exceptional customer engagement and feedback.
4:28: 🔨 Woodworking tools precision measurement and accuracy demonstrated.
8:52: ⚙️ Testing and adjusting woodworking tools to ensure proper function and strength.
Recap by Tammy AI - Věda a technologie
I just got three of going make tools for Mother’s Day. I’m looking forward to trying them.
Let me know what you think after using them.
Hold down clamps look designed perfectly.
They are the best ones I have used.
What we have here is a company who is trying to produce quality tools. They have to fight against the bad repetition that has been labeled on anything coming out of China and it must be difficult to do so. I have always judged a company on its own merits and not because the world says everything from China is bad. Sure there are a lot of products I would not buy from that country for safety reasons, but to say everything made by a Chinese Company is bad would be unfair to those who are sincerely trying to create something of high quality. I think GoingMake has proven that with these woodworking tools.
Most all products sold in the US have parts from China in them. China's government doesn't regulate like ours. They can produce cheap, unsafe items if they want. If a company like Apple has a product produced in China, the company requires them to produce a quality product. Katz Moses has some of his tools manufactured by Hongdui. They produce some of the highest quality tools I have seen. I respect any company whose goal is quality rather than trying to see how cheap they can make it.
I'm VERY impressed with GOINGMAKEs tools. The fit and finish is superb at the price points they are sold for. I personally think they are going to give Veritas some completion. The finish on the tools is better than Veritas and holds up to the daily grind of a busy shop. My guys love the squares and hold downs. I'm very impressed with the entire sharpening system. Each component is made very well and I believe will be in the hands of my grandchildren.
Auto correct- that should have said give Veritas some competition.
Totally agree
I’ve been pretty happy so far with Going Make. I have the T-Square rulers and shelf pin hole tool. I’m looking to get more. The packaging sure is solid as well as the instructions to match the tool quality. I look forward to trying more tools.
I hope to get some more also.
Great review just got the 16in Tee square today can’t wait to give it a try
Nice 👍
I have already bought the shelf pin jig and am really impressed.... and this is coming from a guy that has the Festool Router hole boring set up! The Jig is easier!
Great to hear! Some people think I am saying these tools are good because they sent them to me. I have been sent a bandsaw that was crap. I would not do a video on. I think these are great tools. It makes me want to find more high-quality tools that don't cost an arm and leeg.
Good stuff!
Thanks. My last video I was told I did not test the square for accuracy. I did. It just didn't make it into the video. I hope this showed the accuracy better.
@@ShopRamblings Definitely a necessary step, so good to show viewers.
Looks like a nice tool
So far, every tool I have received from them has been of the highest quality.
I just started buying their stuff (Carpenter square and shelf pin jig) and...I am impressed! I think I will be getting the whole line of products, given the quality and price. I haven't got one yet but if they would make they T-squares with imperial on one side and metric on the other...?
Everything I got has been great so far.
I have their shelf pin jig and it is great! I would like to see them make some accessories for MFT's with 20mm dogs.
Great idea!
Looks like GoingMake is about to launch a website. At least it says coming soon.
I haven't heard that but I am glad. Every tool I got from them was top quality. I am interested if they have come out with any more tools. I will have to check with my contact and see if I can get any information.
Are the lines and numbers lasered on or painted?
After closer inspection, the numbers look white but are actually where the black coating is lasered off, exposing the aluminum.
I'd like to see a quick latch, maybe lever action instead of the screw knob to hold down the material. it would probably be held down with less force but some clamping actions don't need that much.
I have 2 pair that have the lever. A short pair and a long pair. They work good but you don't have any control over how tight they clamp. These can be long or short so you can buy half as many and with them being on sale they cost less. I will pass on your comment. I am not sure if they are planning on making any with a clamp. They said they designing many more tools.
Too bad, they don't have a retailer here in EU, because the prices here are to high for the GoingMake products.
Maybe they will expand
The ruler / squares are junk. Have ordered four from Amazon all four have a bow in them. They do not lay flat. They are square, but do not lay flat
Were they the GoingMake Brand? There are several that look similar. The ones I got were all packed in foam. That is something that has impressed me. Every tool I got have custom foam packing to ensure they didn't get damaged in shipping. How did the boxes look?
Yes Goingmake, They were packaged great. I also have the shelf pin jig. The hinge jig . The benchdog clamps. The table saw thin rip jig. Those all where great. Issues were only with the rulers did not lay flat.
Boxes where great. I tried to bend them straight and they were tough. So it has to be a manufacturer issue. Are yours completely flat? Even the replacements were bent. I can understand one. But 4 out of 4. Is not good.
Goingmake emailed me and asked if I had any issues with the squares. As you can see in the video, mine were all perfect. It is strange that you had the same problem with different items. Good thing you get free returns.
Should I contact them directly.
Personally, I don’t like the font. That’s all I can complain about these.
My eyesight is not what it was. For me, the white on black may not be cool, but it is easy to read.
@@ShopRamblings I meant the brand, 12in, those fonts.
Seriously dude, the Font? Yea I may think that, which I don't, but I wouldn't actually complain about it. Does the Font interfere with the performance of the tool? NO. Does the Font interfere with ANYTHING to do with how the tool works? NO.
Stop being so petty. Man there are some real issues going on in the world and you complain about that. You must be impossible to live with. I sincerely hope you can stop seeing the world in such a negative way. Life is way to short to be worrying about the small stuff. God Bless.
@@crossgrainwoodproductsltd9230 You may not have a sense of humor I guess, and probably do not understand a low key compliment.
@Fusion_Woodworking if you don't like the font, then that is a fact, not a complaint. It is not like you said that is a bad font. I make comments all the time that people think I am complaining. I am just stating what I am seeing.
As always, thanks for the feedback.