Connect Correct(ly)

Sdílet
Vložit
  • čas přidán 14. 09. 2022
  • Join Jack and Keith for a special live stream looking at connecting A&H digital consoles.
    Including dLive, Avantis, SQ and Qu, with details on clocking, tie lines, splits plus setups for FOH/Monitors/Broadcast/Recording.
  • Zábava

Komentáře • 11

  • @jaynolan3254
    @jaynolan3254 Před rokem +1

    I found this video very useful fellas. This is Jay and JAM by the way!👍🏾👍🏾💪🏾💪🏾

  • @davelongenecker649
    @davelongenecker649 Před 4 měsíci

    Some bookmarks for me
    Digital stage boxes will always sync
    to the mixer 6:48

  • @dubanentertainment5783

    Can the Avantis be used with the DLive mix racks..? What would be necessary since the C/DM mix engines are audio processors and the Avantis process audio as well……

  • @anonymissed3611
    @anonymissed3611 Před rokem

    Saw a languishing comment on AH support forum claiming different fidelity with qu mix outs vs L/R, and no response.
    ?

    • @AllenandHeathUK
      @AllenandHeathUK  Před rokem

      Hello!
      If you have any enquiries, please drop us a message at: support@allen-heath.com
      And we'll be happy to follow up.
      Thanks,
      Rafael

  • @chadolson7466
    @chadolson7466 Před rokem

    can you go from the Avantis to the qu without the SQ

    • @AllenandHeathUK
      @AllenandHeathUK  Před rokem

      Hello Chad,
      This kind of connection is not supported or tested, I'm afraid.
      For further information, please contact Support@allen-heath.com
      Thank you,
      Rafael

  • @lintonlupahla1347
    @lintonlupahla1347 Před 19 dny

    i need 96 channels for a coming gig and the 4 Allen & Heath Sq desk with gx stageboxes
    Thinking 2 at FOH and 2 for monitors
    How best can I do this

    • @AllenandHeathUK
      @AllenandHeathUK  Před 16 dny

      Hello,
      Linking two SQ's together will allow you to share audio with each other, this doesn't 'cascade' the consoles to increase the channels. You could however create a mix on one, then share that as a stereo channel with the linked console.
      Please be aware that SQ has one local SLink port, and you can add a secondary port by fitting an SLink optional card, which will allow you to integrate the GX4816 and the link to the second SQ. However, if both SQ's are having a GX4816 expander, you won't have any further SLink port available for the digital split towards the Monitor units.
      I recommend using Dante through a Dante card and DT168 expanders for such setup.
      If you have any further questions, please reach out to Support@allen-heath.com
      Thank you,
      Rafael

  • @tomazklancnik7760
    @tomazklancnik7760 Před rokem

    Video is lagging again…