BMW DSC light fix,try this before buying new pressure sensor
Vložit
- čas přidán 12. 09. 2016
- BMW e46 DSC light show up on the dash,try this before buying new pressure sensor.
----------SUPPORT MY WORK----------www.paypal.me/elbowgreasediy
Please visit my website www.elbowgreasediy.com/ - Auta a dopravní prostředky
I was getting the DSC, ABS, and brake dash lights, along with the pressure sensor code. I pulled the connector, sprayed some contact cleaner on both sides, and gave the pins a very light scrubbing with a brush. Carefully reseated the connector and all the errors went away! THANK YOU!!!
Stuck in heavy congestion on the Bruce highway and these lights came on, got too destination finally and did this and now all clear, thanks heaps.
Thank you! It worked on my Car!! DSC Light is now out, i have done what you have instructed.. My Car has got the 52E1 error and the DSC light is on.. again thank you for this!
Thanks Mate that sorted my problem out, it was exactly the problem you showed and the fix was simple.
Thanks will try this. I think these kinds of problems can happen in a lot of older car electrical systems where the electrical contacts become oxidised/tarnished (maybe dependent on climate too). I think in your case, this must have happened, re-seating the connector basically cleans the contacts.
many thanks Bro. worked perfectly. mine was showing error with both sensors and clearing the code with computer solved nothing. your tricked worked beautifully
You are truly doing the Lord's work LOL. But in all seriousness..thanks bruh. Saved me a headache.
Thank you. The 2 lights came on, on my e46 2004 320d touring a week ago. Tried your fix and it worked, they haven't been on since.
Thank you! This trick worked perfect for me, the light hasn't been back on for the past 3 weeks. Just resit the plug and away it goes (I also cleared the codes with INPA).
Olivier Latorre how can I use inpa I bought it and i dont know it’s very confusing
Please
Iam from the czech republic
I don't know what to do please describe the operations in detail
I dont understand video
Pleas for help
Thank you
@@josefpinta1605 change brake oil and make sure is corect level
Thanks a lot! Your tip worked for me! Although, in my case, access to the DSC connector isn't so convenient - the DSC is under the brakes reservoir (left-handed 330d). Diagrams in INPA revealed the "Offset pressure brake circuit 1" was firstly stuck at 10 bars, after few "reconnections" offset slowly returned to normal.
Did you do this with the ignition on or off?
@@chadriddle3517 While I was cleaning connector the ignition was off I think.
Thank you! This worked for me too. There was actually some gunk under the connector which I cleaned up. I may put some dielectric grease on them later.
Tried this fix today, worked! Thanks! Hope it will last.
Did your fix last?
Thank you for the idea, I will try this.
I tried it, i did it 3 times, 24 hours later it is still working. Fingers crossed! thanks. The pressure sensor costs a lot and getting at it requires completely removing the master fuse box, yuck! THANKS AGAIN.
Best advice video on the internet…. It worked 👍🏻 how long for I don’t know but definitely wouldn’t have thought of that first before changing things
Did you do this with the ignition on or off?
Worked for me and my 2000 Z3. My car couldn't move without the DSC kicking and the brake pump would start to run constantly. All I did was that little plunger push and pull. I did want to force it open and mine seemed real tight. It's not in a real accessible place on a Z3. Few plunges and a few taps with a screwdriver and it's appears to be normal again. They should just put LUCAS labels on harnesses.
Worked very well. Thanks 🙂
What that piece on the left side looking down in the hood called because my e46 325i is missing that area part
Thank you! Whacked the pump with a wrench and it works! Lights out!
And the car is 95 ford escort. Seems like a common issue if the cars been out of traffic in a barn for couple years..
Do you need to take the key out? and do you need the battery unplugged?
Thank you!
Thanks for the video!
Hi, I have a BMW Z4 2008. where is that connector on my BMW. Last fall when I stored it for winter no warning light was on, and when I started it this spring it had a DTC and brake warning
Thats great, i ll give a try. Thanks.
czesc. jak Ci sie ten ethos sprawuje? masz tam dostep do danych?
So you just reconnected the main DSC socket and pressure sensor "recovered"?
Should I remove the key completely or disconnect the battery before unplugging the pump wiring?
Thank you
Really brother thanks It worked
Brilliant ! Thank you so much. It worked perfectly.
Where is this plug located on LHD cars?
I have a question would you know what is that black button right over the red wire is for. Thanks
thank you for fixing my car.
Hey did that but yellow light still on got any ideas weird but car running great
master my tachometer and temperature is not constant motion stands sont wonder why please help
it doesn't show in the video, but the lever has to be pulled up with a decent amount of force. I had to move it around a little to be able to pull it up.
Hi,
I have bmw 320d e90 2005
I have problem with Abs + Dsc + brake light
any help?
2020/09 --------------it's still working
.
:
:
:
:
:
:
:
Excelent
how to change lighting in BMW module find which one handles light out non lcd and use module light changer choose dark blue, and should work got it to work in another one to multiple colors.
Your trick was epic thank you man! Like and subscribe 👍🏻👌🏻
Hi
What is rotating Speed (°/s) ?
Thank you for this. It worked on my old BMW 325i. Saved me about $1500.
It won't be 1500 mate
Do you need to pull the key out when doing this ?
@@wansyahmi3401 I did.
@@MichaelPeak ok
Thank you..doing it later
Just did this to my 530i and it worked as well. Finger crossed!
Had the dsc and amber handbrake light on after Changing the rear pads & discs, fluid levels all correct and I confirm this solved the issue 😎
Where is this plug located on LHD cars?
@@andrei3720 unsure, I have a rhd car and it’s located on the rh side in the servo
It is better to clean all the plugs with contact cleaner spray. I mean the main control unit and both of the pressure sensors contacts.
In other cases the brake fluid should be checked if it is older then two years, because if the amount of water raises it is bad for the sensors too.
In my case I tried everything but finally I had to change both of the pressure sensors ( got them from the junk yard for some 30€). Now it is fixed!
Where are the pressure sensors located?
@@chadriddle3517
On the ABS module
seems to be working so far. another thing that happens for me is that if I don't turn on the AC, then the DSC light doesn't turn on. I have a BMW Z3 e36.
Have a problem with my speed and abs sensors, I replace them but not working!so my gauges no longer working and o don’t know what’s the problem
Hi,
Where does this vacuum line lead to? It came loose and i could not find where to port it somewhere down behind the engine i suppose.
I may not be able to attach photo. The line is on the air intake after the MAF where there are two connections. Now the smaller one under the larger one on the M54 ENGINE
I’m 3 years late but same doesn’t seem to effect anything
thanks for your sharing, my bimmers same case with you and yesterday already reset. 2 hours after DsC on again.
How does the engine run whilst lights on? I have both lights on at times but the engine runs slightly rough and hesitant when lights on. The next day the lights off and runs fine. Can’t see how this effects the engine though.
2002 BMW X5 3.0i I have a code: P0500 speed sensor A DSC, brake,and ABS light, I replaced the wheels sensors, abs module ( black plastic part like 3 different ones, all were from x5 from wrecking yard,,, different numbers then the original do
Did you do that with car on or not
Cheers
I have the same problem. I tryed this trick but nothing. Appeared me on tester fault code 5e21 brake pressure sensor.
I replaced my pump now I've got front left wheel speed and steering angle codes clear but lights fire on the minute I start driving abs pump is used but done 25k
Abs and dsc light on. Try pumping the brakes while driving along slowly, the on-board computer needs a certain amount of driving conditions to calculate before it can reset its self , All sensors need to b working .
Just had this issue with my car today and tried your fix and it has cleared the issue.
What is the *actual* fault? A little corrosion on one of the pins perhaps?
where is this socket in E46 2004 Dizel Automatic ?
I have tried your tip and will take car for a drive later. I have same fault but it is intermittent, sometime happens only after driving quite a way, sometimes when I turn on engine.
How does the car run when lights on? Mine loses some power at the same time and a bit hesitant. Next day lights off and runs fine.
I have got dsc dbc and flat tyre monitor failure lights on my e90. Any advice?
Dude, same. Was yours after removing the negative terminal from the battery ?
I feel like it’s possible this happened after I wash the car? Brakes are great… We’ll see you. Thanks for the video, cheers!
Beware unplugging this could effect speedo or other electrical connections ( best to source the problem and fix it)
Do u unplug the connector with the engine running or off? Video didn't specify.
FlashTwoSix off
was doing 80 kmh and I felt a tiny pop as the lights turned on by themselves.
tried clicking the bttn nothing when I arrived at home I just saw this opened dthe hood and searched and found this connector deep behind some stuff...so I couldn't do it like shown sadly
The lights were on and I fiddled a bit with the connector and it turned off
It's fine now
I'm surprised honestly
what error code will this corresponds with?
Good video, its nice to a see a basic re-seat fix a problem like that, I have few questions
1. I have those same lights but on my 2003 330i it is very intermittent. It re-sets every time I turn off the car sometimes it comes back sometimes it doesn't. But what I don't have is that ABS pump, what else could cause that errors on a car with out the ABS pump?
2. What model Scan tool is that?
3. What model head unit do you have and how do you like it?
Thanks
1.Wheel sensor,auto gearbox problems may do,do you have ELM with it?
2.Old Snap on Ethos
3.Nexus 7 (DIY) like it
Thanks for the reply, My car is a 6 speed so auto is out. I keep hearing about the wheel sensors being dirty and to clean them. I can check my codes with OBD Fusion but it wont read those specific codes like your snap on can. I do like the Nexus 7 head unit very cool, I have an old D95 DYNAVIN that works well enough but the Bluetooth streaming audio is low compared to a CD, MP3disc or even the radio.
Brake fluid level ok?
Nexus dont have radio,streaming or CD but I've got satnav (tomtom) which works good,fast.
If I want to add something I just paring my phone.For me it's enough,music,videos for kids and satnav.
Yeah brake fluid is good, what model number is that snap on. Most if not all my music I stream off my phone. It's an older Bluetooth version my new car (2015) doesn't have any of those issues.
ETHOS,not sure about model but number EESCGB312H with 9.4 soft
do u own a garage, e46 specialist?
try to calibrate steering wheel.
that was my ptoblem.
just put wheels in neutral then turn the key to contact, then turn steering wheel to the full left then to the full right.
then start the car and error is gone. :)
Thank you very much. I replaced the CCV and other items on my BMW 330xi and after putting everything back together, I had the ABS,Yellow, triangle, etc. Yep, putting in neutral and turning the wheels left and right ....made the errors go away in about 5 seconds. Thank you!
Alex Diaconescu sa învârt cu mașina pornita sau nepornita? Ma poți ajuta te rog ?
+Stephen Heichelbech do you have to have the car on Jack to do this in neutral or with the car on?
+Alex Diaconescu do you have to do this with the car on Jack's or just on and in neutral?
James D did it work!
i works for me for the 2 min then light come up again , Any idea what else i can do ?
Ten jeden czerwony kabelek to od RDC ?
dziabi3 angel eyes positive
Hi, I've got the yellow Dsc light on in the dash ( the dsc only , not the brake warning light ) do you think that your trick's gonna work in my car ? ( it's e60 525i 2004 ) Thank you
I'll suggest to check the codes first
@ so I did , it says is the steering angle sensor , I'm trying different things before to get it changed or cleaned . Thank you very much mate
hi i have a bmw e46 i have a same problem with my car but my abs pump have 2 sensor ?
first you read the DTC error stored in memory. I had a problem with DSC error + hand brake light. I scaned with INPA and got a code like " Steering angle sensor Signal not plausible ... " I tested the steering sensor and it was reading correctly (left and right side). But the offset was at 5 degrees left. I remembered that i had one coil spring on back suspension broke at the bottom and the rear side of the car was not on straight position. I changed both coil springs and recoded the Steering angle offset with TOOL32 from INPA (i loaded the file dsc_mk60.***). Now, for 2 years i haven't had that error or dsc light on dashboard ! The idea is that the dsc +handbrake light can appear from some other problems, and without a DTC scan you cannot tell from where is the problem. Maybe you don't need to change any parts just a simple recalibration.
hi, I got this problem with my car but I don't see the main wiring for the pump in mine. My car is a 330i e46 2002. What should I unplug instead? thank you
do you have any scan tool?
I don't. My pressure sensors are next to the brake booster and the master cylindre.
thank you
hello. what was your fix. have the same car
The dsc light only turns on if I move the steering. And it remains on. What seems to be the problem?
E46? Then id say your steering angle sensor needs to be calibrated or replaced. Located on the low end of the steering column . Google it.
I turned off traction control and now when I try to turn it off it doesn’t go off and just recent it strayed showing the brake symbol in yellow . Please help!!
Scan it... can be numerous things .. i got the same as you, and today INPA software detected brake sensor number 1 is faulty. This is located on the brake master cylinder. or it could be steering angle sensor, or a wheel speed sensor... use INPA software to find out and save you a fortune. either way with the exception of the steering angle sensor the other sensors are easy to change.
Has anyone had any luck doing this on a left hand steering model? I can't reach my way to the plug and I really don't want to take the fuse box out.
Hello! I had the same lights on, DCS and yellow brake but no check engine light. I tried your trick about disconnecting the black electrical cover. I didn't realize that I had my key ignition turned 'on' when I disconnected the electrical cover! Now I have the DCS, RED brake light and now the 'ABS' yellow is on also :(. Now when I drive it, my speedometer and fuel consumption gauge does not work. Sh!t!
I pulled a code now P0500 (speed sensor). My car is 2004 330ci. Do you have any suggestions for me please?
Lycan ZHP try tunrnig engine ON and OFF few times
Lycan ZHP I have the same problem. Did you fix it?
Mirko Belacevic Hello! No I did not fix it yet. I am traveling for work so I can't work on my car for a couple of weeks :(. I hope it is just a wheel speed sensor that is making all these lights come on. I really love this car, I just wish it didn't keep having dash lights grrrr. I want to get a better ODB2 reader than the one I have. I am thinking about buying the Carly BMW OBD adapter and downloading the Carly Pro app on my iPhone. Maybe it will give me more information. I don't have an old laptop that I can install INPA, or those types of software, I'm not so good with loading software like that anyway with a computer. I hope it's not the DME or a major Glitch that will cost big bucks.
Have you tried anything?
Lycan ZHP no I didnt. still have same problem :( . thanks on reply, mate
Was this with key in engine off? Or no key at all
Tanvir Khan key off
@ I'm not sure if I got the answer, Key in 0 position or completely out?
What you did had nothing to do with air bubbles, a stuck sensor or quality of the brake fluid. Most connectors need an application of dielectric grease to keep the contacts from corroding caused by vibration and/or moisture. Any small amount of corrosion is registered as a fault in the system connected to the corroded connection. By removing and replacing the connector you simply cleaned the corrosion off of the bad connection for a while, but, just as it did before, the problem will happen again and again, until you you put dielectric grease on the connections inside that connector to keep vibration and/or moisture from degrading the connection, and causing more corrosion and more problems. Look up “motion-triggered contact insufficiency” and/or “fretting corrosion” on Wikipedia and/or Google for an explanation. Or just look around CZcams for problems caused by bad electrical connections in modern computer-controlled vehicles.
I cleaned my module connection with electrical contact cleaner, blew it dry, reinstalled, and it worked. You are very correct about the corrosion issue with these tiny pins.
👍👍👍
My 2004 325i has a problem with the DSC button. When I press it, the triangle lights up on the electronic board, but the brake light does not light up with a yellow light. I tried pressing for a long time, but to no avail. Is there a solution to my problem or anyone who encountered this type of problem?
this is amazing, i m having this issue and also got 128k miles
My dsc light was on as well as the orange handbrake. I tried this and it made mine worse, now my abs light is on, and the handbrake light that was originally orange is now permanently red. Please help!!! I have nct in 2 days and need to get these fault codes cleared!!
The connector is not well plugged/sticked.
gonna try tmr might be a wheel sensor but nothing come up on computer
Where is this plug located on LHD cars?
Only be a quick fix if it does work 4th bmw and 2 abs pumps e46 and e39 cheap if u have winkpa etc and some brake bleeding does take some time to bleed the pump about 60 pounds plus dot4
Unfortunately this didnt work for me, i got PISSED OFF and did some donuts and banggggg both lights turned off!!!! Hahahahah
Serious ?
I have the work "brake" on the dash. it's in yellow. when I pull up the hand brake it turns red. when I release the hand brake it stays on the dash but in yellow. please help.
kevin powers brake fluid... mine did this only it didn't go yellow it stayed red... (this maybe because it's an older model. mine is a 1998 5 series)
When it’s red, that means hand break is in the up position and the emergency break is engaged.When you release it into the down position you disengage the emergency break, which then the yellow “ break” light comes on is normal. Nothing wrong with your parking break or anything else to do with your breaks. Yeah it’s stupid..it’s the way bmw intended to let you know yellow “break” light means it’s in the driving position and red means it’s in parked position.
And could be low level brake fluid. If the light Stays RED! That should of been your first port of call as obviously this can lead to brake failure.
4Ewa808 speedo sensor for the rear tires.
Only got the middle light on
Didn't work on mine
I can’t find the plug on my car it’s a 318ci 2003 can anyone help me
Anyone know what song is playing?
it"s "battleground" from YT library
Okay I just did this and the lights still on but now my speedometer don't work! Wtf!!! Please help. Nvm it redid it and now speedometer back but now different error code for disa and intake manifold? I hate BMW !!!!!!!
My dsc light and hand brake light are never on, never been on since I've owned it. Any ideas?
no problems
I'm unable to turn dsc on or off must be a fault somewhere also the seat belt light comes on then off when I start the car and stats off even when not wearing the seat belt.
Hold the button down for 15 seconds
Sorry. Did NOT clear up my problem. 2000 BMW 323ci E46.
Same car as you with same problem! Did you ever resolve it ?
@@chadriddle3517 Not yet but, indication is ABS module. Far too expensive for me and I still have ABS, just not DSC continuously. Some days, no light.
But if i do that can i turn it on from the bottom inside the car anymore? Is that's works ?on and off thank you 🫡