Making a 9mm-5.7mm chamber insert
Vložit
- čas přidán 19. 07. 2022
- This video details the process of making a chamber insert that can convert a 9mm pistol to 5.7x28mm. Testing of the chamber insert can be seen here: • World’s smallest 5.7 p...
- Věda a technologie
Wether it works or not, you should be commend for your perseverance, patience and primitive tools
Thanks ☺️
Aprendí mucho con tu video gracias por compartir maestro de todos los tiempos, saludos desde chile
If this person had a China made mini lathe, he could build double barrel shotguns
from scratch!
드릴고정이 깔끔하네요🎉
Can you imagine the look on the face of the archeologist that finds this in 1000 years
Excelente !como os velhos tempos do velho oeste ,quando não existia torno ,assim aproveitamos a tecnologia nos dada por ET,s.
👽😉🖖
МОЛОДЕЦ. ТВОРЧЕСКИЙ ПОДХОД. СОЗДАВАТЬ ЧТО-ТО, ТВОРИТЬ, НАХОДИТЬ РЕШЕНИЯ, ВОПЛОЩАТЬ В ЖИЗНЬ СВОИ ЗАМЫСЛЫ-
ЭТО ПРЕКРАСНО!
МНЕ ОЧЕНЬ НРАВИТСЯ ВАШ ПОДХОД:-
В ПРОСТЫХ, ДОМАШНИХ УСЛОВИЯХ, С МИНИМАЛЬНЫМ НАБОРОМ ИНСТРУМЕНТОВ, С ПОДРУЧНЫМИ СРЕДСТВАМИ ДЕЛАТЬ НЕВОЗМОЖНОЕ!
ВЫ ВДОХНОВЛЯЕТЕ ЛЮДЕЙ НА ТВОРЧЕСКИЕ ПОДВИГИ.
СПАСИБО!
пожалуйста :)
Da da , savršena cev za ostati bez sake. A vidim da covek ne zna da je ovo metak za olucenu cev.......Kad bude opalio jedan metak iz nje, sledeci klip ce te gledati kako pravi deblju cev ,nogama....
Aos críticos aqui presente que se julgam, tão espertos e inteligente, desentorte a alça de um pinico, sem quebrar a louça que o protege
not a lick of oil while drilling, I bet it's not tempered anymore, wow
It's miraculous how you managed to make a perfectly centered through hole
Thanks, it’s pretty easy once you drill the first hole 🥵
First hole, thin drill bit, even more miraculous.@@TheRhinestoneHurricane
I'm not sure it is as perfect as you say.
I think it's always a bit of a gamble but as a principle, it is far more likely to get a straight hole by inserting a drill into a rotating workpiece than the other way around.
well Jozef, that is indeed the right way to do it@@jozefbubez6116
İstanbul'dan selamlar müthiş bir iş çıkardın
Thanks, you should check out my playlist 🙂
капец конечно условия и качество изделия, + можно было бы сделать его с горкой... если не иметь вообще ничего и такое сгодится, но я очень негодую.
Sehr lustig, besonders das mit der Eisensäge 😂
Allein schon daran merkt man dass der keine Ahnung von Metallbearbeitung hat.
Was dann folgt ist noch schlimmer.
@@Bluesmann1
Ja und?
Mach das mal mit so einem Setup 😂
Very cool budget lathe
Can't believe I just watched you drill a hole for a half hour... cool project though.
Yes but what a cool hole :P
worst job, not safety and accurate and good.
@@TheRhinestoneHurricaneشسسظظظظظظظظش
@@mattivirta you're just mad he has the balls to do this. 😘
😂😂😂😂
Maybe the man wants to show that even without lathes and various machines, something can be made with a lot of improvisation.
9mm is centerfire, .22LR is rimfire. How do you overcome that problem?
5.7x28mm is a center fire ;)
MT fino esse cano 🔥 🫣 ...💣...💣.....
Mucho ingenio y perseverancia genial .
Muchas gracias! ☺️
Ik zou is een scherpe boor nemen en af en toe een drupje olie zou op zijn plaats zijn denk ik 😂😂😂
Aan de zijkant van een slijpsteen slijpen???????
Like McDonald's, im lovein it....
Nice budget idea,I wouldn't go over a 22 cal but I'm doin it.....
Thanks, 5.7 is technically a 22 ;)
Very good sir. Getting a centre hole threw that round bar free hand must of been hard did you do it first time. Nic work just using a drill.👍
Thanks, I have a drill press now 🤗
Very cool!
Thanks ☺️
@@TheRhinestoneHurricane Can't wait to see some test firing on a range
@@doejohn8674 I already tested it 😯
@@TheRhinestoneHurricane I saw the other video with the blank cartridge, but did you try it with live ammo?
@@doejohn8674 I don’t have any live ammo, probably too spicy for the derringer 😬
Well come my friend I liket your have skill 👍
Thanks ☺️
palisz wiertła wiercąc na sucho, chłodziwo jest potrzebne !
I use a drill press know ;)
I would like to see a test by shooting 2 - 3 rounds. Then I will believe in this method! Хотелось бы увидеть тест по стрельбе 2 - 3 патрона. Тогда я поверю в этот метод!
Ну плешивому диктатору ты же веришь или нет? Хотя он только переобещать обещаемое обещать гаразд.
Метод рабочий, но дрочево... и точность, так себе.
แล้วมันจะระเบิดตั้งแต่ลูกแรกมั้ย ขอรีวิวการยิงด้วยครับ❤❤
Very nice video👍
Does it have a proper chamber? I’m specifically talking about the area in which the cartridge begins to neck down to a smaller diameter, I’m curious to know if your drillbit had the right angle
@@Mihail2204 Thanks, the 5.7 case has a dual radius neck so it’s not difficult to round out 🙂
Has considerado hacer de pastor?
Que el señor te conserve manos y cara intactas...
Что то здесь не так, соосность при сверлении в таких условиях ( без токарного) получится только при встречном сверлении ( и пруток и сверло вращается навстречу друг другу
Een hol pijpje 😂😂😂😂die had je ook in de winkel kunnen kopen dan had je sneller geweest😂😂😂😂😂👍🏻👍🏻👍🏻
Huh? Why do you keep saying this to me. "Zip gun, zip gun, zip gun, zip gun, zip gun, zip gun, zip gun."
@@joshualuna3515 I suspect most people click on this video thinking I’m making a gun, you’ll just have to wait for that video 😉
hmm very basic and effective,smart brain
Thanks, I’m also working on a pen gun 😈
13:28 the dude she told you not to worry about
Нет точно закрепленного центра. Есть ручной подгон под патрон. здрасьте всем. У нас в России за это содют)
a smooth bore? What about the rifling?
We don't need no stinkin rifling B)
Is that barrel come from printer? I disassembled a big office laser jet printer for Gold , it had a few high quality metal tubes perfect for make a barrels like this one ;)
@@tomspeed2000 I have used those but this one had to be drilled out of a solid bar 😉
Sur du petit calibre 🤔 22 lr , maxi,au dessus suis pas sûre que ça tienne la charge 🤔 😮
Kühlung und angemessene Drehzahl wären besser. Laienarbeit!!
Laienarbeit! Das hast du sehr rücksichtsvoll gesagt! 😂
Passender wäre Pfu***
Very good. Maybe Missing subtitles for tools zises on MM used and chamber for bullet should be thicker for pressure.
It’s designed to fit inside the barrel, can’t be very thick 😉
I think that a burral for good gun .😊
It’s not a barrel, it’s designed to go into a barrel 😉
Le centrage plus tôt folklo
Nain teh.kultura.
Have you ever heard of oil?😂😂
Sometimes ;)
Even oil would no longer help with the technology. He lacks more important fundamentals.
Can please tell me what steel do you use? Thanks
I used a roller from a photo copier 😛
Demasiado tiempo perdido en ese proceso
why didn't you use any cutting oil, and be surein the future ti use sharp bits, the last oe was obviously dull and probably weakened the steel!
I used grease on the first bit, the hardest one to drill through ;)
❤❤❤
Способ изготовить смертельное,для хозяина, оружие.
C'est pas faux,😉 22 lr,maxi ,au dessus 🤔 boum 😮
me too I just watching
I think lathes are too expensive too
Sem interesse algum !...
Works for me 😊
А что, разве на токарном станке не проще ли и точнее было бы это сделать?
I don’t have a lathe 😪
@@TheRhinestoneHurricane Печально. Если вы занимаетесь такими работами, то он вам просто необходим. Впрочем, этот станок и для других работ весьма востребован.
Successfully wasted another 10 minutes of my life... but so did he
The 5.7 mm round isn't parabellum but the chamber has parallel sides so won't the casing split
in a rather dangerous manner when you use this chamber adapter?
I don't think so, the 5.7 case should be fully supported :)
@@TheRhinestoneHurricane The AK chamber tapers 1mm in diameter along the length of the casing until the neck is reached. Obviously a taper aids extraction of the casing. I get the point about firing a 5.7mm round down a 9mm barrel, it isn't going to be a good experience.😂 You'll have to show the results.
Кто так сверлит?(12 стульев.)😂Ильф и Петров предвидели такое.
Ерунда, но ты победил в том , что сумел полчаса нам пропудрить мозг,браво.
Mate you need a metal lathe.Asap.
He needs a drill press.
Interesting... any tests planned?
I tested it with a blank that I made :)
@@TheRhinestoneHurricane Great. Just be careful testing live... fingers are priceless but strings (to pull the trigger) are cheap... :)
No offence, but I can't believe that you drilled a perfectly centred through hole using this method. I suspect there's something you're not telling us.
I do it all the time, no big deal :)
@@TheRhinestoneHurricane Sorry brother, but the visible run out on that bar stock in the opening seconds-that alone-would make it all but impossible to keep a drill bit perfectly centred.And I doubt that anyone could manually hold a drill chuck sufficiently steady as to maintain accuracy to that degree. If it was that easy, wtf would we need engineering lathes?
@@ratheanach5545 You can be believe what you want, I just grind out the goods 😎
😂🤣
The chuck that you push forward with the bits in it, is that set up on a little block or something? Whatever your doing is working man.
این مال قبل از اختراع دستگاه تراشه 😢 ! آقا مته سوخت ! آب بریز !
sera preso
what about some oil friend?? it will protect your drills!!
I don't use this method to make chamber inserts any more, I have a drill press now :D
goos good. you bought or diy?@@TheRhinestoneHurricane
@@mitropoulosilias bought it 😊
у него руки золотые, их целовать надо
😂nice sarcasm.
yea that will last about a milisecond when it blows up in his face not a wise thing to do
Ja en wat is het nu geworden 😂😂😂😂
et pourquoi ducros il se décarcasse ? bonjour la précision.. (a chier sans doute🤔) ....
Ow
Устранить фатальное биение не пытался? Это издевательство над материалом и инструментом. Ад перфекциониста!
Thanks
@@TheRhinestoneHurricane Спасибо за видос! А я таких придурков которые в такой агрессивной форме пишут комментарии сразу блокирую, удивляюсь твоему терпению)
@@Tik.Tak.Просто твою херню никто не смотрит, там и блокировать некого😂😂😂😂
แผ่นตัดไทเทเนียม
You fire that and that shoulder and neck on that case will disappear. Not Good!
Какой-то ребенок играется с папиным игрушками ,иди мультик смотри
Пакистан!
America 😎
Cutting oil
I do use a bit of grease on the bits 😉
Что за порнография???😮
🦵 ...... canela seca.....✌️.....🇵🇹...
🦵 ..... CANECA SECA ...😅....✌️...🇵🇹..
Non va bene troppo tempo e troppo lavoro. non si fanno col trapano quei lavori. 😢
It's ok, I have a drill press now 😀
Незнам какво е това може да бъде всичко друго но не и цев
It’s a chamber insert, it goes inside the barrel 😉
The .57 is unstable in a good barrel
Its a crappy round
Good thing its a 5.7 instead of a dutch flintlock caliber then!
Some people shouldn’t be alowed to touch tools 😢…
That drilling is the worst ever 😭…
Yes you are right! don't understand the positive comments. Apparently most people don't understand what they're seeing.
Why not just buy a cheap 9mm barrel ?
It would have to be a blank, can’t any holes drilled in it 😉
@TheRhinestoneHurricane I do know they have barrels with no holes. I got 1 cheap for a 380 I brought back to life. But you're like me. I like to try and make my own stuff.
Криво и тонкие стенки в мягком металле. Если горохом плеваться, пойдёт.
2 word, "CUTTING OIL"
ДБЛ БЛД!
🤣🤣🤣
Video could’ve/should’ve been edited down to about 3 minutes!!!
The whole reason this video took off is because it’s over half an hour 😂
worst drilling what i ewer has seen, better not do anything before you have good tools first. build good lathe or buy,
Não amigo. Pior é não fazer, dar desculpas que não tem ferramentas adequadas.
A maior e melhor ferramenta ele já tem, que é a criatividade.
Parabéns a ele.
M
Frend,beter stop this aderways you will hurt your self of same one alse
Total B S
How so 🤔
😂😂😂😂😂😂wat een waardeloos filmpje
Isn't the chamber insert heat treated after finish?
Nope, relies on chamber integrity ;)
Несоосность очень большая.
What happen if the barrel be rifled all the way even at the chamber ? No trouble ? And what else ?
Is can see - the factory made guns always have no rifling at the spot where the cartridge will b and folowing the lenght of this
You're talking about the leads, this section which gradually phases from nominal bore diameter to the inside lands. This is accomplished by milling down the surface between the introduction of the rifling and chamber mouth,
@@TheRhinestoneHurricane answer - what Happen if the barrel are fully rifled + which is also what happens to the homemade rifled barrels- they Often get fully rifled - no chamber without rifle
@@Vo_d_kontra_o_norMAL that would not work, the shell casing would get stuck 😦
@@TheRhinestoneHurricane the cartridge would get externaly rifled by expansion ? And the cartridge would get out by rotating it out like a screw !?!
@@Vo_d_kontra_o_norMAL that would be quite the extractor 😯
И ! Что дальше ? Здать в плицию за нелегальную перделку ? Бред ! Сколько вас еще таких дурачков ?
I don’t know what’s fake about it, I tested it 🙂
а че ты так сагрился на него? пусть делает что хочет, он еще и доброе дело делает - помогает новичкам освоить кустарное оружейное дело
"Здать" - ЕГЭшник)))))) И Сдают только у нас. У автора (США) это вполне легально., там не ссут власти давать право на оружие людям. А у нас скоро рогатки, блять, запретят.