We Turn This Thing Into A Beast! (Building The Transmission And Tuning For E-85) StreetSpeed717
Vložit
- čas přidán 21. 08. 2024
- In this one we receive Mike's 2019 ZR1 Corvette and beef up the transmission. We also install larger Injectors to support the E85 fuel.
The sounds of those pipes just doesn't get old...
Dan is a friendly guy! I bet everyone is hyped when they're told to go help Dan!
😂 I think Dan likes to work alone.
It’s a Dan thing lol
I get Dan. He is working, doing what he is paid for, not giving a goddamn workshop.
Who is Dan ?
Dan is probably sick and tired of the guy running the camera asking so many Gottdamn questions and just wants to punch him in the throat lol
I love the C7 ZR1, sickest damn car on the road in my opinion of course.
Great minds think alike ole boy because I feel the same way. I just wish disabled people who worked all their lives since the age of 14 and were disabled through a violent crime that was not their fault could be issued one instead of Medicare. I think that I might have to make that trade lol.
@@bigsexymuthashutyomouth2546 Hahahaha Love that Positive Attitude!!!
Just throwin out Philly also!! :)
They just built one a couple weeks ago that is putting down 1400 plus at the wheel. Stock bottom end LT5. Owner uses it to grudge race so they couldn’t disclose all the goods.
I think alot of people share the same opinion I'm one of them my dream car for sure should of made them for more than 1 year so I could afford one one day lol
That’s the baddest zr1 on CZcams
No 🧢
@@donaldbitsinnie8088 Who's is bader?
No cap is slang for no lie as in they are agreeing that it’s the baddest Zr1 on CZcams
@@redkingosiris3800 yes sir
Itsjusta6 has 2 faster Mustangs and Stangmode would smoke him in the Hulk now! Ford> chevy
Who on Earth would give this video a thumbs down???? I own a Shelby, love Mustangs.... S197's AND S550's..... But as of now, the present, The 7th generation ZR1 is king of "American Muscle", bar none, yes, Street Speed 717 is King!! 👍
I agree on that, I absolutely love the gt500 and 350, BUT no way could I turn down a c7 zr1 or z06 for that matter!
The vette isn’t really much of a muscle car anymore especially now with the C8. A ZR1 with options will run you north of 120 grand, no back seats and it weighs as much as a super car. The vette is a sports/super car. The camaro is much more comparable to the mustang
I agree wholeheartedly with that statement that is very well said!!
That car is Mikes Dream car and every Mustang owners nightmare! Love it!
Greatest shop ever to make a reliable car thats fast as fuxk😂😂
That’s AMP
Do some more research lol
I got a feeling Dan has done so many of these he has the torque spec down to what it shd be. I wouldn’t doubt him....
Best color and tune on the road. LMR is the absolute best when it comes to reliable power. Without people like them people like Mike would be running around in cars with maybe an exhaust and a cold air intake. Money can’t buy the skill they have. Awesome💯💯💯🇺🇸🇺🇸🇺🇸
Ready to see this blow stangmode of the road for 38th time again. He’s been talking a lot of bs on the channel about outrunning stock zr1’s lol mikes car is a beast
He said stock zr1 this isn’t stock lmaoooooo
@@wesleyshum8913 Neither is his.....
@@wesleyshum8913 exactly 😈
@@armandosolis3560 still not getting the point
Said “stock” not any or all mr.braindead
@April Teetzel so you want to compared a 400k car to a 100k wow loll
We all love Dan, and he knows it. He is the corvette mad scientist
The attention to detail so that no damage occured to the body and what not, is very apparent. Awesome
That is the Baddest and craziest ZR1 Streetspeed has on his Channel. Can't wait until Mike makes more videos on this C7 Vette. As for LMR love the videos of the upgrades guys make on your Channel. Great videos all the time.
C7 front end is the best. C6 rear end is the best.
Dan is the man for corvette work
You guys do the best work for high horsepower
Chevy power 🔥
It’s gonna be takin down some green gt500!!😏
RIP MAMBA LOL
the gt500 might take him down... his rear bumper...
Bruh SS717 fans are so toxic af.
We just wanna see races not roasting other opponents.
@@Ryan.C97998 StangMode's are the absolute worst, tbh.
*Taken
Love your videos and your work. Mikes ZR1 is awesome. Dan is obviously a talented dude but I am over premodonna techs that know they have you by the balls!!
Crazy how much of a difference E can make a car sound.
Dude the sound of that lt5 just RIPS!! AWESOME CAR
Mike should be happy when he gets it back. Great job LMR.. can't wait for the dyno
DAN looks like he HATES his JOB, I'D kill for that JOB. DAMN BRO
"We Turn This Thing Into A Beast" is an understatement!
All I have to say is those pesky Mustang boys called out the wrong Vette.....🏁🏆🦅
Wow, what have you guys done! Cool to see two ZR1's next to each other especially the deep blue one.
Always a nice video with Mikes car. 👍🏻👍🏻👍🏻
That car looks even better black. I know mike likes the blue. But I pretend the wrap is just making sure the original black is in perfect shape.
That thing is freaking narly, so much rasp from the camshaft, I love it!
STREETSPEEED717 HAS ONE GORGEOUS AN CLEAN ZR1 🔥 🔥 STREETSPEEED717 HAS CHANGED MY MIND ABOUT CORVETTE'S AND I REALLY WANT ONE. 👍 👍
Big LT5! Hell Yeah!
I love that car. Meanest sound ever.
A BEAST FROM LMR SO WHAT ELSE IS NEW !!!!!!
@7:33 one screw holdin’ her together! Ha! Love this car like it’s my own. Go Mike go! She’s gonna rock!
That ZR1 sounds wicked! I love it and I'm a mustang terminator guy.
That technician seems grumpy.
nitroxide91 He acts like he doesn’t like the camera guy. Looks like it hurts him to answer questions. Comes off as a asshole.
Looks and sounds amazing
Been waiting for this vidya to come out! I absolutely love this car!
15:49 Homegirls neck is broken in eight different places.
Danged ole Trans AM Dan !!!!
It was a beast already - so now its more of a BEAST? lol This is one amazingly SIC street car.
Mike needs to take that Student Driver Sticker off the Bumper, looks rediculous....
Nah
It’s funnt
Apparently Dan has never heard of a torque wrench
Torque wrenches truly mess up lug nuts. I’m sure Streetspeed loved seeing his car abused by Dan the dickhead.
Experience trumps three torque wrench.
Carbon fiber rims?
He's a real ugga dugga man.
Ss717 needs a kong 2650 on it........
it’s already a 2.65 liter supercharger bro
Mike’s going to be happier then a cowboy with a new hat 😁
The camera just loves this guy 😆
Mike ought to be thrilled to get this in Pa!
Dan needs a hug
It’s pretty bad ass when you don’t need a torque wrench and you have done it enough you know by hand when it’s tight enough
If I worked next door to this place I would say “I hate my job” about a hundred times a day.
I knew I would see it on here soon!
I really like that cobalt blue one next to mikes
This guy Street Speed has to keep sending his car back to this place because he's scared StangMode will gap him. LOL
lmfaoo bro what kind of drugs you on?
X2
do a bigger supercharger and kong blower and air intake tubes. same for the c6 zr1
STRAIGHT BANANAS 🔥🔥🔥🏁
Dude it’s like there pros or something this is sick
Dan makes this channel great. If you don't like his personality then you need to grow up
Doing a very good neat job quality work.
Dam that cold start was loud
"Check back next week"... Lol
Torque spec on bolting the trans to the diff is 7 clicks on the impact gun.......
Well.... I think the mustangs are going to be in deep trouble now!!!! I bet Mike is happy its returning home soon
"How she drive Dan?" ...."Green".......She drives green?...."Like a DREAM".....Oh 😅
I like everything about the car but those tail lights I think they're hideous.
Love the headlights but I agree I like the clear stock taillights better myself
I don't mind them, it makes this Z more special and unique! It's no where near as bad as what I've seen in the past. Stock lights are nice too, but its too generic and makes all C7s look the same.
For me its that god awful wing.
@@montefiveforty1 It does not bother me at all I did see when someone I took the big wing and mounted on the low wing brackets it looked pretty slick but on a car with that I power it needs that rear spoiler
@@montefiveforty1 nah that wing is dope, compared to pretty much the others styles used on mustangs and stuff.
I like that Mike's car it looks very good and sound is awesome.
Did you guys put in a fuel system designed for high ethanol content to avoid serious corrosion? How about dual fuel pumps for the larger injectors and a higher fuel to air ratio on "E"? That was a great video, you make it look easy, of course you are great mechanics!
It was already a frickin beast now its a monster!!!
That's what I call "shaker hood"
Your telling me that they had part of the exhaust off and did not start it up to see how it sounds.
THAT CAM THO 🥵🤤
Luv that sound chop cop
Best sounding car ever
Hahahaha that guy said December.....
ZR1 FTW
Thing is a beast!
Whats the torque specs on those wheels...chugga chugga 😆
Yes its torqued at 3 chugga chuggas! 😂
The same spec as every other wheel ever changed since the beginning of wheels, goodntight and goodnuff
@@rackemwells for a normal car its fine but with 1000hp and racing at 160mph+ on the streets you want your wheels torqued! Ive never been in a race car where the wheels were not torqued to spec. If you put em on too tight its not good either it can stretch the threads and studs can snap off
It's a video with edits, maybe they just didn't show him go back around with a torque wrench to satisfy the youtube mechanics.
I don't think I've heard a more pissed off vette in a trailer
Would love my Camaro SS to have a cam with the lope like that. I have a 2018 with just a cold 🥶 air intake and exhaust.It has 20,000 miles and it’s covered because the leaves 🍁 are causing havoc on Long Island. I will have to see what happens soon 🔜
i hope it makes great power on E
If my customer was doing 150+ mph runs I’d probably torque everything to spec vs the double tap on the impact. Love the car though.
He can afford to loose a wheel at 160 mph
I feel like dan is angry erics dad lmbo
And that’s just idling 😱
You guys should of went over the torque tube, put in a diff . braces and installed upgraded axles.
These are now the weak points left to go bad.
Not sure why Mike didn’t add the magnuson while it’s there and apart...
Because there are no other superchargers available for the C7 ZR1 yet, and the stock Eatons are pretty big as it is and makes good power with just porting and smaller pullies 🤷🏻♂️
@@speeddemon7572 So Mike didn’t do the supercharger because there aren’t many available? That makes no sense at all...
Bro the magnuson 2650 blower is the one found on a stock C7 ZR1... So that very vette in this very video has it. The C7 ZR1'S stock blower is a 2.65L supercharger that has 14 pounds of boost. That's where you get magnuson "2650" from. 2650 as in, 2.65L supercharger. Just pointing that out. But yeah, I want to see a big ass blower!
I would think Mike should upgrade the exhaust
I was thinking that too. While they had it off, looked like a good time to go 3" all the way back. Ti of course!
Wait, that’s stock exhaust? Damn.
@@troypatillo1688 not a fully stock exhaust, he has a primary muffler delete but that’s about it
@@troypatillo1688 Yeah he wants to keep the stock active exhaust so he can use the stealth mode with the valves closed. I think it's a great sounding car as it is now.
Dan is a Monster!
Bet Dan has allot of friends .
🦅🤙😎🤙🦅hands down the baddest car on CZcams especially when it's Black on Blue
Dan has a overuse of impact gun. Even impacted the wheels on 🤦🏻♂️ Guess in shops its a race to get the job done asap, no matter WHAT.
Most shops do it. Cuts time down and they're properly on anyway lol
he was just double checking everything to see if it was on tight dumbasss
I love all the torque and impact gun comments, as if ANY of these people regularly deal with wheels, torque their own crap, or even OWN a torque wrench, much less even know the specs...
@@rackemwells exactly! Anything shy of 200 mph the wheels are fine with an impact tighten
@@rackemwells I always tq everything to factory specs. Over tq wheels can and has caused death.
Since he upgraded the Trans its time to put a largar blower on it
You’re creating better content with this car than he has lately
Probably because he doesn’t have the car
@@richardjameswellingtoniv9682 LMAO🤣
The exhaust was in stealth mode the entire video wasn't it? It didn't sound like they opened up the muffler valves on the ole girl. I'm hoping Mike upgrades to a bigger aftermarket blower to get more power.
Deez Nuts Dan. Always got jokes, dad jokes
I need dans steady pouring skills, I would’ve had atf all over the damn floor
LMR for president
Rumor has it, Nelson Racing Engines is dropping their Tuatara engine in the ZR-1!! :)
Century in Richmond, I take my car there , lol.
Whoa bud you look ALOT smaller and different? You okay brother
Most badass corvette out there. So damn beautiful. Sounds amazing.
As Mike would say: “Berberberberbberb”
YOU GUY'S ARE AMAZING AND IF I WIN THE C5 I'M SENDING IT TO YOU GUY'S OR SOMEONE THAT CAN MAKE IT SUPER FAST WITH A TURBOCHARGER.