What was it doing before. My truck is surging and runs rough I get it on the street and runs rough for about 10 min at 50 then goes all the way down to about 10 and smokes blue white.. turn it off wait then it goes again for another 10 min all over again
I just had to do an in frame on the engine exactly like this, the pistons are designed after it gets a few miles on it the Pistons will start slapping in the block and wearing the block down where you’ll have to get it bored and a new sleeve put in it it would be best to go ahead and replace it with aftermarket pistons. That’s a solid piston all the way down through the connecting rod, wrist pin so it doesn’t have a small area at the top of the piston that can shift and put unnecessary. Ware on the side of the block causing blow by in the engine to eventually start missing and throwing white smoke. Out the exhaust and out the blow by tube . The engine that we had to do in frame only got the one cylinder board with a new sleeve and all new pistons was put in the block as it was it only had 250,000 miles on it before the engine failed due to the design of the piston .
Great job!
I'm sure you'll be happy to get the old girl back on the road.
Sure was 🙂I love that truck
Thanks Roger
What was it doing before. My truck is surging and runs rough I get it on the street and runs rough for about 10 min at 50 then goes all the way down to about 10 and smokes blue white.. turn it off wait then it goes again for another 10 min all over again
Good that the part is from Illinois and not China.
Agreed 100 %
Thanks Allen
I just had to do an in frame on the engine exactly like this, the pistons are designed after it gets a few miles on it the Pistons will start slapping in the block and wearing the block down where you’ll have to get it bored and a new sleeve put in it it would be best to go ahead and replace it with aftermarket pistons. That’s a solid piston all the way down through the connecting rod, wrist pin so it doesn’t have a small area at the top of the piston that can shift and put unnecessary. Ware on the side of the block causing blow by in the engine to eventually start missing and throwing white smoke. Out the exhaust and out the blow by tube . The engine that we had to do in frame only got the one cylinder board with a new sleeve and all new pistons was put in the block as it was it only had 250,000 miles on it before the engine failed due to the design of the piston .
What was that button you turned on in the cab?
Also where did you get part at and how much just in case I need one
A question, this is a filter? In te pump
@@AdrianOropeza-u9v it’s a pump that converts 30-50 PSI to 3 to 8 thousand PSI and that’s what fires the injectors. High oil pressure
HEUI pump system
good day can you tell me how much for the pump
Do you have a diagram of the high idle switch, mine is not working