Hi, I want to buy the brush and filter for my crosswave 1713K. I found from online the model 17132, is it compatible? And is the brush model 1785 compatible with my 1713K?thanks
These brands tend to empty out floor water (containing any number of things) into the kitchen sink 🤢 the toilet seems more appropriate 🤷🏾♂. Look forward to one where they demonstrate the rinsing rather than talking it through, but all in all great vid. Def have one of these on my list after seeing this.
In my country the kitchen sink, laundry and bathroom sinks all drain to the sewerage system. It doesn’t make a difference if you put it in the toilet, it all ends up in the same spot.
@@Anonymous-md2qp The toilet has the advantage of having a larger pipe and trap that are designed to have significant amounts of solid matter going through them. (such as any lint, hair, grit that your Crosswave might have picked up). The first time I used my Proheat Revolution, I dumped it into the sink, then the second time the bathtub. Both big mistakes, I'm still picking lint out of the hair traps. Toilet just flushes down without any issues.
My cross wave barely sucks a half an inch of water into the dirty tank one doing an entire 9 x 12 area rug… Where is the water hiding from this thing? Doesn’t matter if I go over at 7 billion times without using squirt, I end up with Maxximum half an inch of water in the dirty tank.
Mine too!!! I have learned I pick up more dirty water when I go in a certain direction but, can’t get machine to fit in that direction. Also, if I go slower than a snail, I pick up more water. There’s gotta be a better way or some trick to make rug cleaning more efficient.
Geplante Obsoleszenz vom Feinsten. Staubsauger für 280€ in 2020 gekauft. Jetzt ist ein winziges Verbindungsstück zwischen Motor und Bürste durchgerieben. Konnte das Teil selbständig ausbauen und habe daher beim Hersteller nach einem Ersatzteil gefragt. Auf Nachfrage bei Bissell ist das nicht möglich, nachdem das Gerät außerhalb der Garantie ist können keine Ersatzteile geschickt werden. Ich könnte lediglich das Gerät einschicken und dafür erstmal 45€ bezahlen und dann wird mir gesagt ob und für wie viel eine Reparatur durchgeführt werden kann. Auch auf Nachfrage, dass ich keine Reparatur benötige sondern nur das Ersatzteil wurde mir nicht weiter geholfen. Ich schätze dieses Bauteil kostet weniger als einen Euro. Nachdem es schon etwas älter ist und das ja auch jemand verschicken muss hätte ich kein Problem damit auch 20 oder sogar 30€ zu bezahlen, aber 45€ plus Versand plus was auch immer sich Bissel gerade ausdenkt ist doch etwas viel. Dieses Verhalten verstößt meiner Meinung nach gegen den Circular Economy Action Plan, kenne mich hier aber nicht genug aus. Kann ich die Firma irgendwo dafür melden?
I Bought a bissell hoover and its the worst hoover i have ever bought it lasted 7 months and the pipe split on the bend near the bottom and now i have to buy the whole bottom piece because it cant be repaired so don't buy one waste of money.
Im getting one of these asap
18v cordless option, with wall dock ?
options for two + storey house, with stairs
Hi, I want to buy the brush and filter for my crosswave 1713K. I found from online the model 17132, is it compatible? And is the brush model 1785 compatible with my 1713K?thanks
the filter can i but right under water?
I love my bissell crosswave!!!!!!
Is it really good coz I want to take one😅
Why is the vacuum always active?
Is is any good on quarry tiled floors?
Can I use this machine without liquid if I just want to vacuum but not wash
Im wondering that too
Cant believe they have advertisements on
Seriously considering this . Price is reasonable
These brands tend to empty out floor water (containing any number of things) into the kitchen sink 🤢 the toilet seems more appropriate 🤷🏾♂. Look forward to one where they demonstrate the rinsing rather than talking it through, but all in all great vid. Def have one of these on my list after seeing this.
In my country the kitchen sink, laundry and bathroom sinks all drain to the sewerage system. It doesn’t make a difference if you put it in the toilet, it all ends up in the same spot.
I actually empty mine into the toilet. But I rinse and clean in the sink
@@Anonymous-md2qp The toilet has the advantage of having a larger pipe and trap that are designed to have significant amounts of solid matter going through them. (such as any lint, hair, grit that your Crosswave might have picked up).
The first time I used my Proheat Revolution, I dumped it into the sink, then the second time the bathtub. Both big mistakes, I'm still picking lint out of the hair traps. Toilet just flushes down without any issues.
My cross wave barely sucks a half an inch of water into the dirty tank one doing an entire 9 x 12 area rug… Where is the water hiding from this thing? Doesn’t matter if I go over at 7 billion times without using squirt, I end up with Maxximum half an inch of water in the dirty tank.
Mine too!!! I have learned I pick up more dirty water when I go in a certain direction but, can’t get machine to fit in that direction. Also, if I go slower than a snail, I pick up more water. There’s gotta be a better way or some trick to make rug cleaning more efficient.
mine just seems to not doing much sucking of any dirty water. It has become my worse enemy and the most useless vacuum cleaner yet.
Geplante Obsoleszenz vom Feinsten. Staubsauger für 280€ in 2020 gekauft. Jetzt ist ein winziges Verbindungsstück zwischen Motor und Bürste durchgerieben. Konnte das Teil selbständig ausbauen und habe daher beim Hersteller nach einem Ersatzteil gefragt. Auf Nachfrage bei Bissell ist das nicht möglich, nachdem das Gerät außerhalb der Garantie ist können keine Ersatzteile geschickt werden. Ich könnte lediglich das Gerät einschicken und dafür erstmal 45€ bezahlen und dann wird mir gesagt ob und für wie viel eine Reparatur durchgeführt werden kann. Auch auf Nachfrage, dass ich keine Reparatur benötige sondern nur das Ersatzteil wurde mir nicht weiter geholfen. Ich schätze dieses Bauteil kostet weniger als einen Euro. Nachdem es schon etwas älter ist und das ja auch jemand verschicken muss hätte ich kein Problem damit auch 20 oder sogar 30€ zu bezahlen, aber 45€ plus Versand plus was auch immer sich Bissel gerade ausdenkt ist doch etwas viel.
Dieses Verhalten verstößt meiner Meinung nach gegen den Circular Economy Action Plan, kenne mich hier aber nicht genug aus. Kann ich die Firma irgendwo dafür melden?
what is better for vast hard floors? crosswave or hydrowave?
Crosswave will do wonders.
So the cleaning instructions just showed her face as she explained it….. not helpful at all
totally
HSN has a better vid on YT. While selling the crosswave they did a better how-to from start to finish.
I like her face
She got straight teeth….
Who gives a shit
Veneers
@@jxsilicon9 LOL facts.
Pouring the dirty water into the kitchen sink grossed me out! Yuck!
Its corded? Its 2023. Its a no for me
I Bought a bissell hoover and its the worst hoover i have ever bought it lasted 7 months and the pipe split on the bend near the bottom and now i have to buy the whole bottom piece because it cant be repaired so don't buy one waste of money.