Garmin Zumo XT Install Tenere 700 Factory wiring
Vložit
- čas přidán 18. 02. 2022
- Install demonstration of the Garmin Zumo XT navigation unit on a Yamaha Tenere 700.
#adventurebike, #Tenere700, #T7, #GarminGPS
Items Installed:
Garmin Zumo XT GPS - amzn.to/33xP4EC
MotoPumps accessory rail mount - www.motopumps.com
Wire connectors - amzn.to/3Hty3cF
Crimping tool - amzn.to/34LyamN
Favorite Tools
T-handle allen wrenches- amzn.to/35FZBK3
Motion Pro t-handle -amzn.to/2Gx1HCz and amzn.to/2GFtelg
Tools and products every motorcyclist should have...
Maxima waterproof grease -amzn.to/2Ic8iiO
Honda chain lube/cleaner -amzn.to/2GjzAHK
The best spray polish ever made -amzn.to/2I98TBV
Purchasing from the above links pays a small commission to the channel but doesn't cost you any extra! Please help support MotoSouth and check out my other how to videos.
*Installation of critical components should be performed by a qualified mechanic. - Auta a dopravní prostředky
Hey man- I think I commented the first time I watched and used this video installing a ZumoXT on my t7, but swapping out my GPS and pulled this back up for some reminder tips on the connections. Great pace, visibility of components and explanation of steps. Thanks again!
Great video!! Thanks so much for taking the time. This is a much easier installation than others I've seen. 😊
Just wanted to thank you for the awesome video. Sorry to hear about the hurricane damage, I hope that you've since recovered and are back out on the road. I ended up rolling the excess GPS wire into the empty auxiliary cavity on the right side of the cowl; there is an outlet that allows the cable to spit out right where the empty auxiliary connector is sitting. Again, great video, thank you for passing on the knowledge!
Thanks for watching. As for the hurricane damage, everything is pretty much back to normal but of course they are predicting this year to be one of the worst seasons ever. Guess we’ll see 🤞
@MotoSouth well fingers crossed its a smooth season and you keep the rubber side down.
This set up looks so clean!
Well done and extremely helpful video. As others have stated, thanks for taking the time making it.👍
That was a fantastic video.
Very useful - watched this 3 times - helped me a lot.
( I could also see the care you have taken with the high quality video and audio )
Thank you very much 🙏 🙏 🙏
Thanks for watching 😁
Great video - very clear instructions, easy to follow. Result: Successful install. Thanks!
Thanks for your efforts -just finished the installation!
Glad to help 👍
One of the best T700 videos I have seen. And the links are great.
Thanks, appreciate it! Ride safe and thanks for watching 👍
Great neat install video, I’m in the process of getting a T7 so I’ll use this for my XT 🎉👍
It’s a great bike! Thanks for watching!👍
Well demonstrated, thanks for adding links to the connector's aswell.
Thank you and thanks for watching 👍
great video! Thank you. I am going to the garage today and install my XT. I went with the Rally Raid bar mount.
Sounds like a fun day 😁
Nice T7, and in the proper color!!
They make other colors? 😂😂
Thanks! This was very helpful.
Glad I could help!
Nice Job!
I’m so sorry, thank you for taking the time to edit and share with us. If you ever do the MABDR, let us know if you need any assistance, we live in the area of sections 4 & 5. Again, amazing video, top notch ! Stay safe, thank you again!
The MABDR is on my to-do list for sure. Thanks for the kind words and thanks for watching 👍👍
Great video. Thanks for sharing this.
Thanks for a great video!
Thanks for watching! 👍
Great job and great video. Many thanks 😀
👍👍
Thanks for the install video, so sorry about your home
Thanks bud and thanks for watching 👍
Awesome bike.
Thanks for watching! 👍
Good video as always. keep it up.
Thanks bud 👍
Great video. Thanks👍
Thank you 👍
Grear video!
Add an anti glare foil on that screen and get an anti theft protection called zumolock easy to install in between the mount and attachment bar.
Nice video
Thanks for watching! 👍
Thanks for this usefull vidéo. I’m looking for information to mount the same GPS on the same bike (sorry for my poor English level)
Thanks for watching!
Seriously the best video I've seen, thank you so much.
Those wire crimps are out of stock on Amazon and every auto shop I go to ask like they've never seen them. Any tips on where to find them or something else I could search for online. That accessory box is so small. Most of the wire crimps I find are too big and bulky to fit in there.
Try cycleterminal.com they have a good variety of stuff specifically for motorcycles.
Thaks for sharing your install! What is the AWG size of the Zumo XTblack & red wires? Thanks again. 👍
Great video and thanks for the detail explanation. Could you tell me what is the reference or name of the female connector please ?
Hi, I forgot to ask what size male plug and crimped connectors did you use. I see the little packet and male adaptor plug on the bench at the beginning. Many thanks again. 😃
Have you installed heated grips, interested to do it with auxiliary acoonections like you used for gps.
You have the best instructions out there. Thanks
Haven’t installed any yet but I have a set on my workbench. For those I’ll use the higher power plug on the left side
Hey, love the explanation! Is there any reason why I couldn't cut off the yamaha plug and just tie both cables to each other?
Definitely an option. I just prefer to keep the factory harness intact and plug into it.
I tried it with some regular crimpers, the male prongs didn't snap into place, I guess I need to get the crimpers meant for those connectors
Definitely more secure connection with the right crimpers
Thanks for posting, need to do this myself. Got the parts I needed but the connector. Any way you can tell me which electrical connecter it is? The link goes to the homepage of the supplier, not the specific one. Is it the 2 Pin DC-090
CDI Connector?
I had to contact him via email because it’s not listed on the website. They are also available on AliExpress. I’ll see if I can find the link
I found them on Amazon. Added the link to the description. Thanks for watching!
Nice video. I don’t see any lock. I need a powered locking bracket. Is there such a thing? I’m not going to take the thing off and put it back on every time I get on the bike. This is half a solution.
There are companies that make locking mounts if that’s what you require. Touratech makes one of the most popular locking mounts.
@@MotoSouth thank you. I just ordered it. :)
The connectors you crimped come from the blank connector? 10min :19sec
Got them from Amazon
I assume the accessory connector everyone is using for their GPS is providing the correct power (amps?). What is the accessory connector on the left side used for? I'd like to add heated grips. Which connector should I use?
Heated grips go on the left side connector
@@MotoSouthI had the same question as above. Thanks for answering Great job.
what is the electrical connector I need for this?
Link in the description 👍