Bro, I gotta give you props. You just spent a ton of time recovering less than a third of an ounce of gold because it would have been a waste of money to let it go, but you didn't break the 40 minute video down into parts to capitalize on the CZcams revenue. Because you know we would have all watched 2-4 videos of this as a series. Good man.
I am watching a silver refining for the first time right now and I have been stuck on the 2nd of however many because for 5 days now, I keep passing out. I am cool with that. This is the channel I put on whenever I put the kids to bed andit is my time to relax or go to sleep.
You truly spoil us! I remember the last one, thinking that you save them up for so long that it would be a really long time until we got to see an new filter paper recovery video again. Thanks!
These videos where you recover metals from dirty sources a careless refiner might throw away are some of my favorites. I love the more basic ones too of course, like the last one with the catches, they refresh the memory and it's always a treat to watch gold solutions get clearer and clearer and then watch that high purity gold powder coalesce. I don't thank you nearly often enough for all this cool work you're sharing with us. You should be commanded for carrying that heavy looking microphone contraption on your head for hours on end alone. I've been thinking that a Zoom F2 recorder (no clipping ever thanks to 32-bit float recording magic) with a proximity omnidirectional lavalier microphone like the AT803 could be the perfect audio set up for you. It's not exactly cheap, but it's amazing hardware. I believe that you like to sync up the audio and video in real time directly in your phone as you film in order to save time in the editing room though and that isn't possible (as far as I know) with the Zoom F2 unfortunately.
It’s funny how things or people can pass down their love for a certain thing…the videos of Sreetips, Nilered, BigstackD and Cody’s Lab made me learn a lot about chemistry, metals and all their reactions. Even though I don’t have the room or money to set up something like this, I do have a lot of books and cubed metals about this subject 😇 So thank you Sreetips for teaching us so much about this wonderful subject! Great video as always ☺️
Watching the cacophony of colors that came busting out of the pot when you stirred it was awesome. To think of all the different substances left behind on those filters. Another impressive video as always, thank you for your time to keep the videos a healthy length. I enjoy having them play on my second monitor. A certain ASMR value to the whole thing on top of the font of knowledge you offer us. Bravo.
Love it! I’m newer to the channel but it’s always relaxing to watch these videos and listening to the ambiance reminds me of a recovery of my health last year. = )
I keep watching these videos and envisioning what I'm going to do in my retirement. Thank you so much for inspiring this in me. I can't understand what it is about how your videos make me watch 40 minutes without getting bored, but you've managed to do it. If you described what the video was about to me, and I hadn't seen one of your videos before, I'd give it a hard pass. But your approach to filming this stuff is educational and fascinating to watch. Thanks again!
I love it. You give a lot of meaning to 4,9s fine. I still have my older hvac refrigerant recovery vacuum pump and gages which I use in my back yard refinery.
I love these vids. You do such a fantastic job of narrating your videos. Your voice is buttery smooth ;). The yellow liquid oozing out of the solid looked like butter!
Love your videos, and how you explain everything so that even a novice can understand most of what's going on. To the point, informative and no extra "mumbo jumbo", makes it a comfortable and relaxing video to watch, and I can spend hours watching you extract metals rather than watching a movie or whatever. Big shout out from Norway! Keep those videos coming Sreetips! :D
@@sreetips I suggest that when you are filtering the results of your aqua region boil it would be better to avoid adding the solids in to the filter - repeatedly rinse the residues in the beaker until the solution runs clear. This is easier than rinsing and stirring the solids once they have been added to the filter funnel and you avoid the risk of ripping the paper.
Much thanks for all the recent great content. Was a huge help having stuff to watch in the hospital last week dealing with a foot surgery. Showed some of my nurses your stuff and they were really interested. Also showed to one of my doctors and that started a really cool conversation about chemistry and whatnot. Was this yield about what you expected from all the filters?
You’re welcome! It was my pleasure to watch this excellent production. Your investment in a proper vacuum pump system is a wise decision. Quite surprising is the length of time to draw the liquid through a filter that ends up looking like it’s nearly clean in the end. 👍👍🤟.
Thank you, everything! Your videos are so satisfying. I get my "fix" from yours specifically, coming down to your meticulous attention to detail. Please keep it up. You definitely hooked me with the 20k usd gold bar that one time
I think I’ve finally collected all the supplies needed to do my first refining….I’ve enquarted my 10-14k scrap that I’m using last night! Thanks for showing me the way sensei!
Wonderful refining of those old collected material sir! Goes without saying this was pure hard work and knowledge. A bit of an extra insight about your personal experience between @19:10 - @19:30 is what we go through in this subject on a regular basis. I guess its like we never stop learning and every new discovery makes it even more fascinating and an enjoying procedure. Nonetheless it was another soothing video to watch since all your procedures are well demonstrated and explained. GREAT JOB! P.S Im still intrigued to learn how those specially prepared filter papers were actually prepared @12:50 and @20:55. Many Thanks!
Good morning Sreetips. I've been looking forward to this video. Now I'm looking forward to those solids that didn't make it through the Strainer. Cool stuff my man...
That's quite a collection of particles that didn't go through the screening process! Might be worth getting a coffee grinder to chop it up into little bits. They're super cheap. The coarse material will probably blunt the blades fairly quickly but they'd chop it all up into a finely divided state and any iron filings from the blades would be easily removable with a neodymium magnet.
Great video! If I may have 2 recommendations to make your filtering much faster. You can use a plastic door mash cut out exactly to fit in between your filter paper and your funnel that will create More air flow. You can also use diatomite filtering media On top of your filtering paper so it does not clog up fast. You can also use fiberglass filtering paper to filter your gold at the end of your process so you end up with very dry Material with fiberglass filter paper that you can melt together. I enjoy your videos very much keep up the good work!
Some people may look at these yields and be disappointed but I see it as the filtering process you use works very well. Ideally there shouldn't be anything there to recover so the less there is the better you've done the earlier stuff. But it reminds of the last few batches I've done over the last 3 weeks. I did some filters and I did another stockpot cleaning. The filters had almost no gold and only a few grams of silver, and I was good with that. After I siphoned off the copper rich liquor from the stockpot and into one with an old brake rotor in it I let it sit until no more copper came out of solution (at least 3 months). I've been recovering the copper mostly out of personal interest and curiosity and I've made a small copper electro cell. With this last stockpot I melted all the slimes and copper together and poured it as an anode bar. When I ran that through the cell there was a surprising amount of black dust building up on the bottoms of the cell. It was super rich in gold and PGMs which told me that there could be a lot left in that bucket after the copper appears to stop working. Testing the first stage in the stockpot showed no precious metals in solution but they sure came out on the iron. The copper from the cell is just going to go back to cementing silver. When I incinerated the filters I was shocked with a very sudden flare up and flash. I'm guessing that there were some filters in there that I had used when I recovered the KNO3 from my nitrate solutions. They provided a nice hit of O2 at the wrong moment. Whole yard smelled like fireworks for an hour. :)
Really nice recovery! I was wondering if it makes sense to save a bunch of these smaller recovery buttons after a single refining and then refine them all together to make a "three nines" gold bar. I can definitely see how a single refining of these buttons makes a lot of sense (from a time and materials perspective). Really nice video!
I wish you would have allowed the time lapse to slow down so we could appreciate the different colored flames. Green fire is, and always will be an absolute trip.
I think the third step after charring and grinding should have been to burn it again with the electric furnace to get rid of all the carbon. That would reduce the amount of solids a lot and make the gold extraction and filtration much easier.
i think you could have simplified the step in which you rinse the solids to get the dissolved gold out, which you stated gives diminishing returns, and also get much more out of those solids. rather than washing the solids while still in the filter paper, you could just dump the solids into a beaker with distilled water, stirred a bunch, let the solids settle, and then decant the beaker into the one containing your gold solution, and THEN filter the solids 1 more time, and you wont need to struggle with washing under vacuum and diminishing returns at all.
Asked a question about centrifugal filters and some one mentioned a centrifuge . What I was trying on get to was repurposing a truck centrifuge oil filter or some of the old metal working machines used centrifugal filters. These would remove almost all of the particles as long as not in an acidic solution.
It's always a pleasure to watch you in action, once again turning trash into treasure. Out of curiosity, how much silver do you end up recovering from a filter run like this? I'm presuming that more of the value from this process is in that gold button, but I still end up wondering at the whole picture of what all you managed to extract.
Need some of those larger paper bags they have for leaves at some hardware stores or boxes you can fit a plastic bag around. While it probably doesn't amount to much, looks like there were some material that dropped off or blew away.
I wish i wouldve had science teachers that made science as fun and fascinating as some of you fellers on youtube do. Seriously, its so fascinating to me to see you take papers and extra pure gold from it.. i figured it wouldnt be much worth saving at all.. shows how much i know lol
It surely pays to not be wasteful. Maybe someday you could make a video on the importance and proper ways to maintain equipment some of these folks may not appreciate what goes on behind the scenes.
He can't seem to ever be able to resist putting the wood he cuts in his yard to good use burning some metal bearing material that needs incinerating. He did it the last time already when he cut down a tree. It's nice, might as well use carbon his yard extracted from the atmosphere than carbon fetched deep underground by energy companies. :)
I will saynu got me interested in this ..they really didn't have it in school high school anyway a computer room was our break through tech in that day lolo but u got me interested in it that's for sure u gonna help me make my life better and don't even know it lolo well I think ya do hahah thank u soon much for the knowledge
Another great video Dr. Sreetips! Many thanks for your easy to understand explanations! Also a great reminder to do my filter papers. How much silver did you get? Take Care, Jim in Phoenix
There was probably a couple ounces in there. But I didn’t recover it completely. I added some more silver nitrate from my gold extraction to keep my stream of silver recovery flowing. It’s a never ending battle to keep up with the silver.
Quite a few decades ago, I did a somewhat similar experiment, to your silver cement process. I had a small amount of silver nitrate solution. (About 1 teaspoon or so.) I stuck a piece of copper wire in it,and saw the silver "plating" the wire. I next stuck a nail in it. The copper "plated" the nail. That had to be about 50 years or so, ago. steve
I have been watching your videos for a while now and am inspired to try silver refining myself. I'm curious whether your videos are for demonstration purposes only or do you do larger quantities off camera? I'm curious about how much is a reasonable amount to do at a time.
thats awesome most people would of thrown those filters away and not even think about it I didn't think you was going to get that much gold out of them and thats not even counting whatever else you get out of them silver , ect God bless you and your family my friend
Only the clueless would throw away those materials. I worked in the check lab for a world scale gold company doing fire assay analysis for 8 hours a day, day in, day out on 30 g ground rock samples. We’d inquart whatever gold was in the rock with 10ml of 0.1M AgNO3. After cupellation, we’d hit the dire bead with HNO3. We’d get several mg of gold, that we’d weigh record and then dump into a receiving vial. We had to run the samples anyway, so why not keep the gold. It’d take years to gather an ounce. No rush. And we’d recover the inquarted Ag as the chloride. No valuable metals went to the drain.
Absolutely amazing video. Also does anyone know how one would remove gold plaited items with every day household chemicals or is there a way to use KNO3 potassium nitrate!
Thank you for sharing such an interesting video. I understand refining precious metals involves lots of things and it take a lot of time. But you’re doing it patiently for us. And, that makes me not to complain about length of your videos. In reality long videos help us to get more knowledge what could have been skipped in short videos. Just a suggestion if you can also perform purity test after recovering the metals. 🙏🙏
after collecting alot of the refining residue, id suggest either burning it completely or using piranha solution on it to remove all of the carbon, it appears it carries 90% carbon after all. it would definetly help with refinment
Good morning and thank you for all the videos! One question. I have some cement silver that is contaminated with a bunch of copper. Do I need to melt it into shot to refine it or can I just go for the acid and refine it again?
I love watching the skill, if you remember someone said weeks back next, he will be showing us how half ounce of gold could be extracted from the filters. lol you ask he showed you how
hello Sreetips, at 13' you don't need to filter the whole beaker, just pump (and filter) the liquid containing the nitric from above, and rinse it two or three times since you are going to be making aqua regia just after.
Somthing again from what you could think is nothing but to the trained eye not a micron has been missed very interesting yet again thankyou for your time and the effort that is a nice weekend up the coast for you and the wife in the value of this bitten you recovered again very interesting
What you do is fascinating! I remember watching cartoons with a chemist of some sort and beakers filled with colorful liquids that were green, blue, yellow, etc.... always thought that was unrealistic until YT recommended one of your videos! If I saw these videos in high school or college, I may have changed my focus, program or major. (Probably went the route of SOF in the military, but this is a close second for sure!)
I am brand new here and thoroughly enjoy learning about this! (PS I just subscribed) My question is about the filter papers. What is special about them? Are they left over from your other refining processes, or what?
Welcome. I refine gold and silver. After dissolving in acid, I filter the solutions to remove solids. The filter papers trap undissolved solids that may contain traces of precious metals. So I save all my filters. When I get a bucket full, then burn them and process them to recover any precious metals that they contain.
Bro, I gotta give you props. You just spent a ton of time recovering less than a third of an ounce of gold because it would have been a waste of money to let it go, but you didn't break the 40 minute video down into parts to capitalize on the CZcams revenue. Because you know we would have all watched 2-4 videos of this as a series. Good man.
I would have watched all 4! I want him to get that YT Money!
I am watching a silver refining for the first time right now and I have been stuck on the 2nd of however many because for 5 days now, I keep passing out. I am cool with that. This is the channel I put on whenever I put the kids to bed andit is my time to relax or go to sleep.
@@busbey61 you and I share something in common, then!
I enjoy the long format videos. 🙏❤️🤘
@@busbey61 he sure is easy to fall asleep too. In a damn good way. 🤷♂️ I enjoy the content but it's just as soothing as it is enjoyable... Lol
You truly spoil us! I remember the last one, thinking that you save them up for so long that it would be a really long time until we got to see an new filter paper recovery video again. Thanks!
Gooood evening from central Florida! Hope everyone has a great night! Always enjoy the filter paper recoveries! Thanks for sharing!
Gooood evening!
These videos where you recover metals from dirty sources a careless refiner might throw away are some of my favorites. I love the more basic ones too of course, like the last one with the catches, they refresh the memory and it's always a treat to watch gold solutions get clearer and clearer and then watch that high purity gold powder coalesce. I don't thank you nearly often enough for all this cool work you're sharing with us.
You should be commanded for carrying that heavy looking microphone contraption on your head for hours on end alone. I've been thinking that a Zoom F2 recorder (no clipping ever thanks to 32-bit float recording magic) with a proximity omnidirectional lavalier microphone like the AT803 could be the perfect audio set up for you. It's not exactly cheap, but it's amazing hardware. I believe that you like to sync up the audio and video in real time directly in your phone as you film in order to save time in the editing room though and that isn't possible (as far as I know) with the Zoom F2 unfortunately.
Generally in any Chemistry type endeavor a smart Chemist never discards anything, ever!
It’s funny how things or people can pass down their love for a certain thing…the videos of Sreetips, Nilered, BigstackD and Cody’s Lab made me learn a lot about chemistry, metals and all their reactions. Even though I don’t have the room or money to set up something like this, I do have a lot of books and cubed metals about this subject 😇
So thank you Sreetips for teaching us so much about this wonderful subject! Great video as always ☺️
We watch the same channels 😂
BigstackD is how I found sreetips! The YT algorithm was doing a good job that day.
Big stack is awesome!
Amazing how the algorithm works- recommending everyone the same channels!
BigstackD hell yes i just hope that metals shelf does not brake and hurt his doggy's
Watching the cacophony of colors that came busting out of the pot when you stirred it was awesome. To think of all the different substances left behind on those filters. Another impressive video as always, thank you for your time to keep the videos a healthy length. I enjoy having them play on my second monitor. A certain ASMR value to the whole thing on top of the font of knowledge you offer us. Bravo.
Love it! I’m newer to the channel but it’s always relaxing to watch these videos and listening to the ambiance reminds me of a recovery of my health last year. = )
I keep watching these videos and envisioning what I'm going to do in my retirement. Thank you so much for inspiring this in me. I can't understand what it is about how your videos make me watch 40 minutes without getting bored, but you've managed to do it. If you described what the video was about to me, and I hadn't seen one of your videos before, I'd give it a hard pass. But your approach to filming this stuff is educational and fascinating to watch. Thanks again!
I’ve been looking forward to this, ty sir 👍🏻
I love it. You give a lot of meaning to 4,9s fine. I still have my older hvac refrigerant recovery vacuum pump and gages which I use in my back yard refinery.
You got a lot more than I was expecting. I’m glad I watched till the end.
I love these vids. You do such a fantastic job of narrating your videos. Your voice is buttery smooth ;). The yellow liquid oozing out of the solid looked like butter!
Love your videos, and how you explain everything so that even a novice can understand most of what's going on. To the point, informative and no extra "mumbo jumbo", makes it a comfortable and relaxing video to watch, and I can spend hours watching you extract metals rather than watching a movie or whatever. Big shout out from Norway! Keep those videos coming Sreetips! :D
Thank you!
@@sreetips I suggest that when you are filtering the results of your aqua region boil it would be better to avoid adding the solids in to the filter - repeatedly rinse the residues in the beaker until the solution runs clear. This is easier than rinsing and stirring the solids once they have been added to the filter funnel and you avoid the risk of ripping the paper.
Excellent suggestion. If I had thought it through then I probably would have done that. Inexperience due to infrequent type of scrap. Thank you.
Fascinating, thank you. I wondered how you recovered gold from the used filters. One of my favorite video so far.
Great, thank you so much for making this video.
I am learning a lot from you about metal recovery on this side of the world.
Much thanks for all the recent great content. Was a huge help having stuff to watch in the hospital last week dealing with a foot surgery. Showed some of my nurses your stuff and they were really interested. Also showed to one of my doctors and that started a really cool conversation about chemistry and whatnot. Was this yield about what you expected from all the filters?
I was expecting 4 to 6 grams so nine was a pleasant surprise.
You’re welcome! It was my pleasure to watch this excellent production. Your investment in a proper vacuum pump system is a wise decision. Quite surprising is the length of time to draw the liquid through a filter that ends up looking like it’s nearly clean in the end. 👍👍🤟.
Thank you, everything! Your videos are so satisfying. I get my "fix" from yours specifically, coming down to your meticulous attention to detail. Please keep it up. You definitely hooked me with the 20k usd gold bar that one time
I think I’ve finally collected all the supplies needed to do my first refining….I’ve enquarted my 10-14k scrap that I’m using last night! Thanks for showing me the way sensei!
I saw the whole thing. Very cool 😎
I liked the story of how got hooked on science/chemistry.
The pleasure was all mine watching.
I am enjoying this video thoroughly, and find your patience amazing! A button of gold! That's great!
All those different colored flames.....so cool looking.
Fascinating, ty for educating me
WOW! I can't believe what you recovered from the filter papers. You're so skilled!
Love these recovery videos. Can't wait for the eventual stockpot recovery series.
Stock pot recovery is amazing... I just realized I have been watching for 4 years or so... An stock pot will be quite exciting to witness!! ✌🏼💗👩🏼🔬
Man you always a maze me. This is my favorite channel out of all the things I watch and try and learn yours is by far my favorite.🍺
Thank you!
Thanks for the editorial. I'll never do this but it is magical.
I’m loving the frequency of the uploads lately
Wonderful refining of those old collected material sir! Goes without saying this was pure hard work and knowledge. A bit of an extra insight about your personal experience between @19:10 - @19:30 is what we go through in this subject on a regular basis. I guess its like we never stop learning and every new discovery makes it even more fascinating and an enjoying procedure.
Nonetheless it was another soothing video to watch since all your procedures are well demonstrated and explained. GREAT JOB!
P.S Im still intrigued to learn how those specially prepared filter papers were actually prepared @12:50 and @20:55.
Many Thanks!
Good morning Sreetips. I've been looking forward to this video. Now I'm looking forward to those solids that didn't make it through the Strainer. Cool stuff my man...
You gots to have a passion for it, a labor of love!👍
That's quite a collection of particles that didn't go through the screening process! Might be worth getting a coffee grinder to chop it up into little bits. They're super cheap. The coarse material will probably blunt the blades fairly quickly but they'd chop it all up into a finely divided state and any iron filings from the blades would be easily removable with a neodymium magnet.
Great video! If I may have 2 recommendations to make your filtering much faster. You can use a plastic door mash cut out exactly to fit in between your filter paper and your funnel that will create More air flow. You can also use diatomite filtering media On top of your filtering paper so it does not clog up fast. You can also use fiberglass filtering paper to filter your gold at the end of your process so you end up with very dry Material with fiberglass filter paper that you can melt together. I enjoy your videos very much keep up the good work!
Some people may look at these yields and be disappointed but I see it as the filtering process you use works very well. Ideally there shouldn't be anything there to recover so the less there is the better you've done the earlier stuff.
But it reminds of the last few batches I've done over the last 3 weeks. I did some filters and I did another stockpot cleaning. The filters had almost no gold and only a few grams of silver, and I was good with that. After I siphoned off the copper rich liquor from the stockpot and into one with an old brake rotor in it I let it sit until no more copper came out of solution (at least 3 months). I've been recovering the copper mostly out of personal interest and curiosity and I've made a small copper electro cell. With this last stockpot I melted all the slimes and copper together and poured it as an anode bar. When I ran that through the cell there was a surprising amount of black dust building up on the bottoms of the cell. It was super rich in gold and PGMs which told me that there could be a lot left in that bucket after the copper appears to stop working. Testing the first stage in the stockpot showed no precious metals in solution but they sure came out on the iron. The copper from the cell is just going to go back to cementing silver.
When I incinerated the filters I was shocked with a very sudden flare up and flash. I'm guessing that there were some filters in there that I had used when I recovered the KNO3 from my nitrate solutions. They provided a nice hit of O2 at the wrong moment. Whole yard smelled like fireworks for an hour. :)
It always astounds me that the torch and the flames don't cause gold powder to fly off!
Man, you throw nothing away. Amazing!!!!!
Some collection is better than none! Nice work!
Really nice recovery! I was wondering if it makes sense to save a bunch of these smaller recovery buttons after a single refining and then refine them all together to make a "three nines" gold bar. I can definitely see how a single refining of these buttons makes a lot of sense (from a time and materials perspective). Really nice video!
Yes, I’ve saved them up and refined them together myself.
😍😍 loving these videos!!
Never gets old. Thanks
Love it when you do these videos that is like once a year or so!!
I have learned so much from you. I wish I had a direct line to you lol.
Looking forward to another 40 minutes of fun in a year or two. Filters annihilated, gold earned! Awesome!
I love the stock pot/filter paper recoveries!
Nice work thanks well brvo my friend
The rainbow colors of the flames from the papers burning the different metals is so cool
Love what you do!!!!
I wish you would have allowed the time lapse to slow down so we could appreciate the different colored flames. Green fire is, and always will be an absolute trip.
That was fascinating, thank you so much for making this vid.
Definitely worthwhile processing thanks for sharing : )
nicely done my friend
wow thats a lot of filters. this man gets more out of his filters than me on my last ram badge! 👏
I think the third step after charring and grinding should have been to burn it again with the electric furnace to get rid of all the carbon. That would reduce the amount of solids a lot and make the gold extraction and filtration much easier.
I truly love watching your stuff and how you have name on everything lol
i love your channel. Always loved chemistry. It is exciting to see it being used in real life applications.
i think you could have simplified the step in which you rinse the solids to get the dissolved gold out, which you stated gives diminishing returns, and also get much more out of those solids.
rather than washing the solids while still in the filter paper, you could just dump the solids into a beaker with distilled water, stirred a bunch, let the solids settle, and then decant the beaker into the one containing your gold solution, and THEN filter the solids 1 more time, and you wont need to struggle with washing under vacuum and diminishing returns at all.
I was wondering how you did this process after watching you refined in the gold process. Great stuff :)
Hello Senior, the Season is upon us! Will keep you posted. Great vid as usual.
That's quite a bit of gold to just come out of some filter papers, nice work. 👏
Thanks for the precise explanations to all your videos.👍💯
That part of the silver and copper trading places was awesome!
The Point of Diminishing Returns. Nicely said, sir.
It’s amazing! Your a Gold scientist.
Asked a question about centrifugal filters and some one mentioned a centrifuge . What I was trying on get to was repurposing a truck centrifuge oil filter or some of the old metal working machines used centrifugal filters. These would remove almost all of the particles as long as not in an acidic solution.
It's always a pleasure to watch you in action, once again turning trash into treasure. Out of curiosity, how much silver do you end up recovering from a filter run like this? I'm presuming that more of the value from this process is in that gold button, but I still end up wondering at the whole picture of what all you managed to extract.
There was probably 2 or 3 ounces of silver
These are very fun
The flame coming off the filter papers was very interesting. Blue and green flames indicate copper is in the filters.
Yes it's a bit of backyard gas chromatography!
@@AndyGraceMedia very entertaining.
A good look at the colours might give indications about other elements (including metals) as well.
Need some of those larger paper bags they have for leaves at some hardware stores or boxes you can fit a plastic bag around. While it probably doesn't amount to much, looks like there were some material that dropped off or blew away.
I wish i wouldve had science teachers that made science as fun and fascinating as some of you fellers on youtube do. Seriously, its so fascinating to me to see you take papers and extra pure gold from it.. i figured it wouldnt be much worth saving at all.. shows how much i know lol
Wow I appreciate that you show us how to do this.
That flame colour is so pretty
It surely pays to not be wasteful. Maybe someday you could make a video on the importance and proper ways to maintain equipment some of these folks may not appreciate what goes on behind the scenes.
It also seems like it takes far less copper to replace the silver in solution it's amazing how little it takes to get so much out
I really enjoy your content. Where do you purchase your supplies. Filter system, acids, beakers, etc.
Most of it on eBay.
Sreetips supposed to do yard work, ends up refining. I could see that being an common occurrence in the Sreetips household :)
Love your videos.
He can't seem to ever be able to resist putting the wood he cuts in his yard to good use burning some metal bearing material that needs incinerating. He did it the last time already when he cut down a tree. It's nice, might as well use carbon his yard extracted from the atmosphere than carbon fetched deep underground by energy companies. :)
I’ve been waiting for this for so long! Thanks Sreetips!
I sometimes wonder, " Is it really that important to keep all those filter papers?". Yes, it is, thanks Sreetips for another great video.
What type of filters are these?
Whatman lab grade filter papers.
I will saynu got me interested in this ..they really didn't have it in school high school anyway a computer room was our break through tech in that day lolo but u got me interested in it that's for sure u gonna help me make my life better and don't even know it lolo well I think ya do hahah thank u soon much for the knowledge
a small extra yield from the melt dish ;) you always find a way to do two jobs at the same time. great job.
Another great video Dr. Sreetips! Many thanks for your easy to understand explanations! Also a great reminder to do my filter papers. How much silver did you get? Take Care, Jim in Phoenix
There was probably a couple ounces in there. But I didn’t recover it completely. I added some more silver nitrate from my gold extraction to keep my stream of silver recovery flowing. It’s a never ending battle to keep up with the silver.
Quite a few decades ago, I did a somewhat
similar experiment, to your silver cement
process.
I had a small amount of silver nitrate solution.
(About 1 teaspoon or so.) I stuck a piece of
copper wire in it,and saw the silver "plating"
the wire. I next stuck a nail in it. The copper
"plated" the nail.
That had to be about 50 years or so, ago.
steve
Cool flames!
Appreciate the frugality.
I have been watching your videos for a while now and am inspired to try silver refining myself. I'm curious whether your videos are for demonstration purposes only or do you do larger quantities off camera? I'm curious about how much is a reasonable amount to do at a time.
Sean, I only have the one silver cell. I’ve got everything to set up a second. Plan on making a video of it. Just need to make it happen.
thats awesome most people would of thrown those filters away and not even think about it I didn't think you was going to get that much gold out of them and thats not even counting whatever else you get out of them silver , ect God bless you and your family my friend
Only the clueless would throw away those materials.
I worked in the check lab for a world scale gold company doing fire assay analysis for 8 hours a day, day in, day out on 30 g ground rock samples.
We’d inquart whatever gold was in the rock with 10ml of 0.1M AgNO3.
After cupellation, we’d hit the dire bead with HNO3.
We’d get several mg of gold, that we’d weigh record and then dump into a receiving vial.
We had to run the samples anyway, so why not keep the gold. It’d take years to gather an ounce. No rush.
And we’d recover the inquarted Ag as the chloride.
No valuable metals went to the drain.
Bravo!
Absolutely amazing video.
Also does anyone know how one would remove gold plaited items with every day household chemicals or is there a way to use KNO3 potassium nitrate!
Thank you for sharing such an interesting video. I understand refining precious metals involves lots of things and it take a lot of time. But you’re doing it patiently for us. And, that makes me not to complain about length of your videos. In reality long videos help us to get more knowledge what could have been skipped in short videos.
Just a suggestion if you can also perform purity test after recovering the metals. 🙏🙏
after collecting alot of the refining residue, id suggest either burning it completely or using piranha solution on it to remove all of the carbon, it appears it carries 90% carbon after all. it would definetly help with refinment
Good morning and thank you for all the videos! One question. I have some cement silver that is contaminated with a bunch of copper. Do I need to melt it into shot to refine it or can I just go for the acid and refine it again?
I’d dissolve in hot dilute nitric, then cement the silver out on copper.
I love watching the skill, if you remember someone said weeks back next, he will be showing us how half ounce of gold could be extracted from the filters. lol you ask he showed you how
hello Sreetips, at 13' you don't need to filter the whole beaker, just pump (and filter) the liquid containing the nitric from above, and rinse it two or three times since you are going to be making aqua regia just after.
Wow, that's awesome!
Good work , that’s dedication 👍
Somthing again from what you could think is nothing but to the trained eye not a micron has been missed very interesting yet again thankyou for your time and the effort that is a nice weekend up the coast for you and the wife in the value of this bitten you recovered again very interesting
I know the filter paper process is quite labor intensive but they’re some of my favorite videos!
Excellent that's More than I thought you would get outstanding video sir thank you for sharing five stars
Can I suggest that to save time you could blend the burnt ash before passing it though a sieve?
Another awesome video!
I always like to see new uploads from Sreetips !!!
What you do is fascinating! I remember watching cartoons with a chemist of some sort and beakers filled with colorful liquids that were green, blue, yellow, etc.... always thought that was unrealistic until YT recommended one of your videos! If I saw these videos in high school or college, I may have changed my focus, program or major. (Probably went the route of SOF in the military, but this is a close second for sure!)
I am brand new here and thoroughly enjoy learning about this! (PS I just subscribed) My question is about the filter papers. What is special about them? Are they left over from your other refining processes, or what?
Welcome. I refine gold and silver. After dissolving in acid, I filter the solutions to remove solids. The filter papers trap undissolved solids that may contain traces of precious metals. So I save all my filters. When I get a bucket full, then burn them and process them to recover any precious metals that they contain.
@@sreetips Thanks!