Great job brother. The purple made the hat pop. Perfect color for that hat. I also love working on hats and enjoyed watching someone else , thanks brother.
Cheap, quick, easy, and perfect. I bought a 1/2 pint ($3) of clear shellac, used 91% alcohol ($1) and a mixture of 4:1. I took 8 oz. of 91% alcohol and 2 oz. of clear shellac mixed in a spray bottle. Brush hat clean, then sprayed several coats until damp on upper and lower side of a 3 yr. old mink color fur felt Stetson Temple ($229) which would no longer hold shape. Sprayed lower side first. After approximately 30 minutes when lower side was no longer tacky, I sprayed the upper side of brim. Drying time was approximately 30-45 minutes. I shaped the brim as it dried and let it set overnight. The stiffness of the brim was absolutely perfect as was the shape with NO discoloration. I could not have been more pleased. NO problems, quick, easy, worked perfect, at a cost of ONLY $4. Cheaper than any other product sold or advised (shellac chips).
Thanks for making the video. I pick up a lot of hats at the thrift store that have not had any tender loving care and your video has showed me how to install a new hat ban and a ribbon for the crown. Thanks a lot!
Good work. I restored 3X beaver hat, no beaver, with hot water and iron. Put in Gus crown and flat brim. Hat experts would not do restorative work as they said hat was not beaver but just wool felt. It's perfect for here st the hideout.
I can not even tell you how many good hats I have got at thrift store , I clean them , Steam them , And shape them . Something I love collecting . But I am beginning to run out of room . LOL
Nice. This is a wool felt hat? How often do you need to spray with stiffener? I laugh when these expensive beaver felt guys say they dont wear theirs in the rain.... Wool is cheaper and you wear a hat whenever. A beaver-wool-rabbit mix might be better but they are expensive so.. Again nice job.
Since the title of the video is Kahl Hat Stiffener, I am going to guess it was that, not water. That hat was wrecked beyond tea kettle steaming and love.
@@TheGeorgio64 he does it this way because the hat even if steamed won’t hold its shape. Some hats may need stiffener so it can hold that shape and not go back to its previous shape.
Great job brother. The purple made the hat pop. Perfect color for that hat. I also love working on hats and enjoyed watching someone else , thanks brother.
Cheap, quick, easy, and perfect. I bought a 1/2 pint ($3) of clear shellac, used 91% alcohol ($1) and a mixture of 4:1. I took 8 oz. of 91% alcohol and 2 oz. of clear shellac mixed in a spray bottle. Brush hat clean, then sprayed several coats until damp on upper and lower side of a 3 yr. old mink color fur felt Stetson Temple ($229) which would no longer hold shape. Sprayed lower side first. After approximately 30 minutes when lower side was no longer tacky, I sprayed the upper side of brim. Drying time was approximately 30-45 minutes. I shaped the brim as it dried and let it set overnight. The stiffness of the brim was absolutely perfect as was the shape with NO discoloration. I could not have been more pleased. NO problems, quick, easy, worked perfect, at a cost of ONLY $4. Cheaper than any other product sold or advised (shellac chips).
Very good!
Thanks for making the video. I pick up a lot of hats at the thrift store that have not had any tender loving care and your video has showed me how to install a new hat ban and a ribbon for the crown. Thanks a lot!
Good work. I restored 3X beaver hat, no beaver, with hot water and iron. Put in Gus crown and flat brim.
Hat experts would not do restorative work as they said hat was not beaver but just wool felt. It's perfect for here st the hideout.
I can not even tell you how many good hats I have got at thrift store , I clean them , Steam them , And shape them . Something I love collecting . But I am beginning to run out of room . LOL
Very nice restoration, a craftsman you are..
Love it! Great work!!! ❣️❣️
Nicely done!!!!
lovely job
Wit my New York brim and my gold tooth displayed……nobody give me trouble cuz they know I got it made………das one pimp daddy hat right there….LOL
Nationwide
HAT COHA SIROOKI OBOD TAJ NENOSIM JARANE HAT. COHA COHA. 😊
Great video . Thank you.
Great job.
Thank you
Que buen trabajo , me ayudó bastante.
Hola.! Tengo 27 años trabajando en Borsalino Valencia Carabobo Venezuela 🇻🇪 es genial
Nice job
Sharp!
Wonderful thanks
Excellent!!! Where did you get the hat block?
Nice.
Could use a piece of sticky tape to get the lint off the hat.
Nice. This is a wool felt hat? How often do you need to spray with stiffener? I laugh when these expensive beaver felt guys say they dont wear theirs in the rain.... Wool is cheaper and you wear a hat whenever. A beaver-wool-rabbit mix might be better but they are expensive so.. Again nice job.
sweet
Where can I purchase hat blocking tools?
Not the same hat band, the purple didn't look right, but nice job on the hat
Who are you"? Can you fix my hat?
Donde consigo el espray
puedes adquirir kahl endurecedor por amazon o por ebay, gracias por ver el video ,
Hi. What was you spraying on the hat before ironing it?
water, you could also use the iron on steam setting
Since the title of the video is Kahl Hat Stiffener, I am going to guess it was that, not water. That hat was wrecked beyond tea kettle steaming and love.
@@BaronEurchild rewatching it, I can see the label of the hat stiffener now. I'd steam first and then add stiffener, but that's just me.
@@TheGeorgio64 he does it this way because the hat even if steamed won’t hold its shape. Some hats may need stiffener so it can hold that shape and not go back to its previous shape.
SIKKKKK
*steam
Hi ser my name is jennifer im 30 hight what if them fendora, 🤔🙄😂😊😱
Jesus Christ died for you so live for him
Amen !
@@sheltonhawthorne9369double Amen brother