How To Wire Built In Kenwood OEM Steering Wheel Controls - Toyota
Vložit
- čas přidán 25. 08. 2024
- Using the built in steering wheel control interfaces saves you heaps of money and its really easy to use. This is how to wire the factory harness to suit older model Toyota vehicles. Using the Kenwood DDX917WS Toyota Unit here.
Thanks alot! This also worked for my Sony stereo that I put into my 2008 Mazda MX-5. I rewired an old 3.5 mm audio jack to those contacts and it worked. Also I didn't have pins for the plug, but improvised with striped wire that I put some solder on for stability, pushed through and fixed with hot glue. I mean, if it's stupid and works, it's not stupid :D
Hello, Frozen! so if I have the 3.5 jack with two wires only, do I need to buy any module? I'm thinking to connect the ground from the 28 pin connector to ground of the car. I already have located the 3 wires from SWC
Hi, yes, that should work without any box, if you can freely program the SWC in your radio.
In many cases the signal is just different resistance values.
Best to find the wiring diagram for your car and the SWC plug for your radio brand. I believe the position of signals on the 3.5 mm plug can be different.
At least worth a try before you get a special box for it.
@@frozenwoodfrog thanks, I going to install a Kenwood 7705s I will try to connect the jack to aux out from HU to the 3 wires from the car connector.
Any info on 2018 navara steering wheel pin locations
Where can i order 28 pin plug ?
I have DMX5020S Kenwood, installing into 4th gen 4Runner. I do have the blue wire/yellow stripe (steering remote) coming off the Kenwood deck. I also have the diagram that shows factory location of wires. However, if the goal here is to 'direct wire' into the factory wiring, what is the 3.5mm conversion for? I have nowhere to plug that in. Any ideas?
did you find out what to do?
Anything on connecting the built in Kenwood DMX125BT oem steering wheel controls?! I have a 2014 Kia Forte LX
Tried finding this 20-pin plug from your website but shop only shows Toyota Camry 2006 onwards, not 2005.
How can I buy one of your adapters
www.kenwood.com/au/car/visual_navigation/oem/
Here is the link, so you don't have to type it from the video
Sir not working in honda crv 2010 model.why?
@@fennymercado5734 How am I supposed to know? Did you wire up the cables properly?
I have a 2008 hilux wich harness should I buy ?
And what is you guys website ?
Si does it work directly, or should I buy an module for the steering wheel?...
Depends on you the audio receiver
@@triplesix4792 Kenwood ddx4021bt
Is fit for Elite i20 India?
Hello guys! I have jdm Toyota and Kenwood multimedia. I find this 20 pin connector with these three wires. Connect with jack and plug in the my mulimedia. And remote function doesn’t work. But, the multimedia has 1 interesting wire - remote cont (steering wheel remote input, light blue with yellow stripe). Do you know what is it? With which wire I must connect him? Thanks.
Did you figure it out? My head unit has nothing
what is the website??
I just did the same thing for my 2007 hilux surf but the unit doesn’t recognize that I have the steering controls plugged in...
Check they are plugged in correct and pin corrected as it does work.
About to do exactly this on a 2013 FJ Cruiser, any idea of the connector I should expect car side? Love the vids BTW thanks!
FJ is a 20 pin plug I believe from memory. We have them if you need email team@carboncarsystems.com.au
Looks like the older Hilux's have the 20 pin plug as well. E-mail sent :O)
Hey mate, love the video. I have a JVC KWM740BT which comes with the 3.5mm jack to 3 loose wires for steering wheel control.
Do you have details on what wires these go to in the cars harness for a 2006 Yaris?
The JVC unit also has a blue wire with yellow trace with a tag on it for steering wheel control. Is this just discarded as I’ll be using the 3.5mm jack instead?
Hey mate I have the same unit, how did you go, does it have the control unit inbuilt or did you have to buy a controller for it.
If anybody comes across this from Google -
JVC KW-M740BT does have in built steering wheel remote control decoder that you connect with the small aux style cable (included in the box) JVC / Kenwood have a reference sheet with what pins to use and if steering wheel control options is greyed out in settings you need to connect the park brake sensor wire and have it on (or bypass it by connecting park brake wire to ground). ref. au.jvc.com/car/av_receivers/pdf/Direct_OEM_Steering_Remote.pdf
@@sonny5741 THANK YOU! I just got my RAV4 steering wheel control working!
@@sonny5741 you're a fucking legend, I was going insane trying to figure out why the option was greyed out, many thanks
@@sonny5741 @Sonny Spakianos Thnaks for the info
Thanks for the info, making me cringe tho everytime you tap the glass on your monitor with a metal screwdriver.... Staahhhppp!! lol
Clean Install, if you want to see other great 12 volt videos please check us out.
Sir wap sait name