Pressing 100 shirts using DTF transfers
Vložit
- čas přidán 1. 04. 2021
- Finally gave DTF (direct to film) transfers a try! I have spent the last 2 months learning about the way its printing the type of printers you can convert and even purchased my own. Stay tuned for that series! Any ways DTF is great for ordering bulk transfers very inexpensive and with low to no minimums, in addition most companies will do a gang sheet which allows you to put as many designs as possible. Ive linked one of my affiliates below if you want to get your own designs printed in DTF or purchase your own printer. Thank you for watching.
Order DTF Transfers to try here:
kingdomdtf.com/r?id=e1gjgo
Read my blog and see a full list of printers you can convert on my site at: www.lumedia.net/post/dtf-diy-...
Follow me on instagram and tiktok @lumediacreative
Where can I order the transfers pre-printed just like you did
FIRE VIDEO THANKS FOR SHARING !!!!!!!!!!!!!!!!!!!!
Buy a transfer or two to try out here! kingdomdtf.com/r?id=e1gjgo Want to read more about DTF and see a list of printers? Go here: www.lumedia.net/post/dtf-diy-what-i-know-so-far-bonus-list-of-printers-you-use
thanks for your vids im tryna get started and been following ror a min. looking for a press and printer. entry
Like it to got the Acrorip getting the printer next. Love DTF
Im going to start with AcroRip 9.3. But more than likely will be using CADLink.
nice setup. looking to get some DTF transfers done myself.
Thank you!!!
Hello, I absolutely loved your video I finally decided on what kind of transfers I wanted. I do want to ask if you ever made the video of washing the garment after the DTF transfers has been pressed. If you did make a video if you can please send link.
Hey thanks for all the videos. You helped me start my Heat Press venture. I have my 1st big order coming up and Tshirts won't be here until tomorrow. Was wondering if you can pre print on the jet opaque for dark colors like a day in advance so I have all my printing done when the shirts get here and just have to transfer or does sitting on the paper that long cause issue? Thanks in advance for any help and keep up the vlogs!!!
I have prints that have been sitting for months now!!!! I use them steadily and have no issues whatsoever!!!
Good Morning Mister. When you heatpressing, why you using pillow sheet instead on silicon ruber?
get er done
Where do I find that gang sheet at 22"?
I am paying ridiculous prices bc companies refuse to print gang 🤦
Most DTF transfer Companies allow for gang sheets. I’ll get a good list together and post in my next video!
Hey, im not sure if it's a relatable question. But i made 2 presses but noitce that it sticks to the silicone sheet. How can i avoid that problem?
how long does the printer take to print 1 print? Also, how long does paper take to cure?
BLESSINGS TO ALL
What do I need to get started
Where can I buy DTF transfers from? What company did you use?
Can you recommend a heat press that does more then shirts that can press mugs as well? Is the hp printer still a good printer or would you suggest a different printer?
I typically don’t like the multifunction heat press. More things that can break. I suggest getting a press for each thing you will do. I do suggest going with a sublimation printer over this. More versatile. And at this time about the same price. Shoot me a dm on Instagram and I can provide links!
@@Lumedia dm on Instagram sent thank you
Which company supplied the. Prints??
Did you find out where Lumedia mentioned he go the prints from?
The ink u used for those shirts are from kindomdtf? I’m looking for very very good vibrant ink
I use DTFSuperstore consumables for the most part! 😄
Yo! I have a dtf p800 too. what program are you using? Im using cadlink.
I use Acrorip! I tried cadlink but couldnt get it to work with either of my printers. How are you liking it so far?
Hi,could you give the link to order dtf sheets?thanks
dig your desk. lmfao
Where did your order your prints from. That’s a great price
They recently went up to $3 a square foot. I have a video dropping in the following days speaking about it! 😄
Yo I got a question what type of computer do you use to get the designs to the t shirts?
I have both a cheap walmart Windows laptop and a fully built rig.
@@Lumedia so say you want to change the color yellow would you need to draw it again or can you change the color Through the pc as long as you have the ink ?
Hey man, is the shirt after printing like a big photo, will it be very hard feel to it?
Hey Andy, do you mean if it feels like a sheet of paper or rubbery?
@@Lumedia More so when worn can you tell it is a thick piece of paper or it is quite light?
Depends on your artwork to be honest! I have seen it both ways!
@@Lumedia Got it. Thanks for the reply! Great videos~
Would you like a video showing that? Pretty good topic!
hi Bro also I'm starting t-shirt business but where can I buy the cheap t-shirt?
Jiffy shirts or if you need quick Michael’s has them for $3
@@Lumedia ok thank you so much
Do you prewash the before applying DTF?
Nope, just lint roll 😄
Thank you!
No problem at all!
Lol leavin that fly down for ventilation holmes?
😂😂😂😂 you know it! House is HOT 🥵
have you done kennel logos?
I haven’t made one yet but I can!
Where are you located?
Dallas Fort Worth metroplex
@@Lumedia Do you sell DTF Prints?
Seems so cheap just to order them
Already printed I don’t see the point in printing them yourself lol
Speed, short runs, love of tinkering 😊