1999-2007 F250 & F350 Blend Door Actuator Replacement
Vložit
- čas přidán 6. 09. 2024
- Nothing worse than getting into your truck on a cold day and have the air no longer defrost your windshield your heat your cab properly, or on a hot day when the air wont blow directly on you. In this video I will show you how to fix that issue with a new blend door actuator. It takes less than 5 minutes with minimal tools needed. #f250 #f350 #7.3powerstroke #ford #blenddoor #actuator #f450 #f550 #f650 #f750 #excursion #fordexcursion #temperatureactuator
Blend Door Actuator
www.amazon.com...
All models this fix is compatible with
1999 F250, F350, F450 & F550
2000 F250, F350, F450 & F550
2001 F250, F350, F450 & F550
2002 F250, F350, F450 & F550
2003 F250, F350, F450 & F550
2004 F250, F350, F450 & F550
2005 F250, F350, F450 & F550
2006 F250, F350, F450 & F550
2007 F250, F350, F450 & F550
2000 Excursion with manual temp control
2001 Excursion with manual temp control
2002 Excursion with manual temp control
2003 Excursion with manual temp control
2004 Excursion with manual temp control
2005 Excursion with manual temp control
2001 F650 & F750
2002 F650 & F750
2003 F650 & F750
2004 F650 & F750
2005 F650 & F750
2006 F650 & F750
2007 F650 & F750
2008 F650 & F750
1999 Windstar
2000 Windstar
2001 Windstar
2002 Windstar
2003 Windstar
My AC is blowing through defrost on my 2006 6.0. Besides a vacuum leak. Can this be a potential problem for that?
Yes, very likely! That is what this truck was doing before I changed it. Make sure to have your dial turned to defrost before changing it otherwise it will mess up your controls.
@diydevin Ok awesome. I'll order a OEM replacement and give it a shot. Thanks for replying
Could a intermittent ac not working be a possibility for this failed part?
I recently changed ac compressor and did a proper recover and charge on Freon.
It was working great and randomly began blowing hot air, the next day it was back to blowing cold air, again intermittently going hot
Yes that could very easily be the case. If the blend door actuator isn’t closing or opening properly then you can have inconsistent temperature through the vents.
Hi! I’m seeing options for ordering an auto or manual actuator, which would I need to order?
It should be an actuator for a manual temperature control.
Is it needed to be calibrated?
Yes and no, figure out what way the air is blowing, for example if it’s blowing at just your feet put the dial to the feet setting and then install the blend door actuator.
@@diydevin is air flow direction depend of blend door?
Yes it is.
Is this also for the 1999 Ford Expedition??
It is not, unfortunately the actuator on the expedition of that year is under the center dash rather than behind the glove box.
@@diydevin Thank you
What were your symptoms making you replace this?
@mikemoler349 well although I changed to AC, it keeps blowing hot air, and now it does not blow any air except defrost in front counsel
@@mikemoler349 Back counsel if fine no issues