How to Install Ultra Clear Screen Protection on Apple Watch 7/6/SE/5/4
Vložit
- čas přidán 5. 09. 2024
- This video shows you how to install ZAGG InvisibleShield Ultra Clear screen protection on your Apple Watch. Save your watch’s screen from scratch and shatter damage.
Follow ZAGG on social:
• Website: ZAGG.com
• Instagram: zagg
• Twitter: ZAGGdaily
• Facebook: zagg
• CZcams: / zaggtv
Tried applying two of these and it’s impossible. Went outside and destroyed my car with a bat
same drove me nuts. set my car on fire too
Set my neighbor’s car on fire and after that I destroyed it with a bat.
Love it!! Same!!😂
Bruh same $15 for nothing am a have to rob them 😠
Whoever designed this needs to fired. 🤣 took me like 10 min trying to figure out how to apply tab 2, I was able to when I lifted tab 4
This just doesn’t work!!! I have tried to apply two of these and when you are pulling up tab two the film comes up with the tab and it won’t separate with the squeegee. This system is terrible and I will never buy another one. I am revising this because I did get it to work but the video misses an important step. See my update on how to do this. What I was missing was that there is a seam between layers 2 and 3 and you must bend the shield back to expose that seam before you start to squeegee. See my comments below.
Ok, it is 8 months later and I know I said I would never buy another one but my wife did and she has asked me to put it on her watch. I'm going to give it another try bearing in mind that when you bend 2 back you have to go a little past half way. I will let you know if that works. At least I know that I am not alone based on the other comments. My guess is that once you figure this out it is easy but the instructions definitely could be better.
@@mathman1475 its better than i thought it turned out at first, but it still feels like it was a waste of 15 dollars lmao
Instruction not clear. My Apple watch is stuck on the wall.
So once you get to tab 2 and 3 it feels like you messed up. It's hard to understand in this video just exactly what she is doing. But if you look closely you can see that you need to lift the tab 2 a little more than halfway to be able to squeegee the screen in place. Wish they would show a close up of the action 1:18 so people wouldn't think they messed up. It looks great! ... if you can figure it out.
This comment is really helpful. Unfortunately I didn’t read it until after I already creased the screen protector trying to remove tab 2. Time to order another one.
This product was the hardest screen protector to put on and I didn’t even do it I messed up two of them and they were both very thin was definitely not going to protect anything very disappointing I am very disappointed in zag
This CZcams was excellent. I would suggest watching this video 2-3 times prior to installing. The hardcopy Application Guide is too vague to use standalone. Be very patient while executing each step of this video, pausing & replaying as you go, and you will be as successful as I was. The hardest part for me was the alignment of the shield over the watch face- used both hands, some bright lighting, and wear glasses if you need them.
Now my screen is protected with bubbles.
Hahahahahahahaahahhaahhah
@@0xskywalker33 l
Can’t believe I just applied it flawlessly 😎
It took me a while to see that the hard plastic piece is under the actual screen protector and I had to slide out the plastic piece. By that time I had a few fingerprints on the underside of the screen protector, but it turned out ok still. But, is it waterproof?
Cool, just ruined the screen protector.
Needs updating, what tabs were supposed to exist that didn’t?
Yeah- I screwed it up and will be returning it. Totally not user friendly.. you better give more details in a new video!
No bubbles, but there is a line like the screen protector was folded during squeegeeing? Otherwise looks great
yeah on mine it left a line like the adhesive got smudged even though i just took off the tabs lol
I just tried installing one of your shield for my android phone and I could not get huge air bubbles out so I threw it away. I even went through your channels video too.
This was very helpful. Thank you so much!!!
Guys it does work its supposed to peal back when you lift 2 and 3
And number 4 is last
I can prove it if you want me to make a tutorial like this comment
Yea it’s simple to figure out after you ruin it. You only needed a 2 or 3 tab, not both. If they said you were peeling layers from underneath the actual protector it would’ve at least been more clear. I’m sure there’s a better and more convenient product out there.
Mine was installed perfect just followed the instructions 👍🏽
There literally should be only 1 tab instead of the unnecessary 2. First, the video is painfully unclear once you get to tabs 2 and 3. Figured it out, but wasted so much time when I could have gotten a new protector instead. Once you finish the application, there’s a line right in the middle of the watch, due to the bending and folding of the protector from tabs 2 and 3. Great concept and I have no air bubbles, but instead of having two tabs, just have one tab on the bottom so you can apply their same concept with the squeegee and push from bottom up, and there’s no line in the middle.
Mine never stuck to the edges and I had Best Buy install it. It has a warranty but they charge $7.99 shipping on the replacement.
i paid 30 dallars and couldn't return it
Mine didnt stick at the edges. But when I got frustrated and just took out the screen protector, the one layer that didnt stick was not actully the screen protector. The actual one is on there. You might want to check agaian.
What do you do if the corners keep coming up?
The WORST SCREEN Protector EVER I have a Apple Watch 3 and I had to find a tutorial for that one since you guys changed the design. I ended up having my protector attached to tab 4 and just hanging on by a thread! Yes I have 5011 bubbles but was able to revive this catastrophic nightmare
Made a huge crease across the screen protector trying to remove tab 2. Thanks to another comment, I figured out what I was doing wrong but now I have to order another screen protector.
I tried doing this myself, and couldn’t figure it out because I had no idea what the squeegee was
Im returning this bs screen protector
How many attempts did it take to shoot this tutorial?
which product comes with the sweegee
IMPOSSIBLE TO INSTALL. Pure hell
helpful however i messed up theres a tiny bubble i couldnt get out because of the tape from 4 not letting me squeegy past it. THEN my tab from 3 stayed on the final screen somehow and never seperated or something i thought maybe there was another layer because of it and tugged at it and it lifted up UGH. finally was able to pull it off but i totally ruined it ={
Can I use a bumper as well with this?
Application was very easy with no bubbles. I guess I just have a steady hand
If I had to explain “overengineered” with just one video.
Just put a line in between mine doing the number 2 part, confusing Instructions
Second one I’ve screwed up… I hate this thing. 😭
I am a longtime zag customer but this is one of the worst watch screen covers I’ve ever installed. Very difficult and no matter how careful you install you will have lines. Design-fail.
This is a shockingly bad design, please re-evaluate what you're doing Zagg.
I can't believe how ill thought out and not user friendly this process is. This is honestly one of the worst products I've ever bought.
Mine won’t stick on the edges
easy setup
They said like glass. This protector is so thin, i wonder if it really even works.
Ruined the protector
Anyone else put this on backwards and ruined the plastic 😂😂
Yay mine looks awful
It’s literally so easy, I dont know what’s up with all you in the comments 😂only issue I have was the little line in the middle which looks like a stretch which in reality isn’t so bad. As long as I know the screen protector is there , im fine. The screen is being protected that’s all that matters.
Exactly the same. No big deal.
I cant believe it too but I just put it on 👌🏻
Doesn’t work
“Smooth” so many bubbles😭
Zagg this is a tutorial, not a music video!
got it on but still leaving a dislike
Can’t see anything.
Mine didn’t work cause the instructions were not clear on the paper and I’m mad I would like a new one for free I paid 15 bucks just went in the trash bad reviews for this company
more like #1 protector for my trash can
We’re all so 21st century for searching it up. I was about to follow directions on a fooking paper
just follow the directions. its not hard to install
Thanks for the video - helped me with a flawless installation!
Horrible screen protector. Mine was missing the squeegee. And even will perfectly followed step by step instructions, I still had so many bubbles on the screen protector and nothing I did made it any better. I’m very disappointed
Mine is not sticking to the screen i want a refund
This did not worked as directed. The directions are quite poor
Few things in life have made me more mad than trying to apply this. What a waste of $30.
🤦🏽♀️ *ANNNNND IT’S STILL A FAIL FOR ME* 😔 😭 ((GETS IN CAR AND GOES BACK
TO BEST BUY))
The instructions don’t help and the packet is so f’ng confusing. It’s a nightmare applying it! They try to make it as hard as imaginable lol
worked perfect. thanks.
Worked perfectly thank you!
I was hesitant but following the instructions I was able to install it perfectly. Works great!
Poorly designed product and even worst tutorial. The installation looks nothing like what you get from the product! I'm returning it!
This works great. It was easy to install. It looked complicated but this video helped. Other people say they have bubbles. I have none whatsoever. Y’all must’ve gotten dust under it.
Could they possibly zoom out any more. The person who made this video should be fired
This worked great for me! It worked perfectly!
One of the worst I’ve ever had. Design-fail
Followed the instructions and ruined the screen protector. Worthless
Horrible explicación 🤔🤔 me deja más dudas me trabajo el hígado.
Terrible! Impossible to get all bubbles out! SAVE YOUR MONEY!
They're advertised as glass but are literally cheap plastic stickers. All it did was create bubbles and fingerprints under the "shatter protectant" sticker. What a joke
This is the worst screen protector out on the market . I would not recommend at all this product isn’t worth your money
My product only has film on one side. Zagg sent replacement and replacement is of same poor quality and instructions don’t match the product you get
Video seriously flawed. Don’t follow these instructions or you’ll end up giving up, sticking the shield on by any means and living with the bubbles.
Very worst product
Never buying this again. 16 bucks down the drain and my brother is mad at me
Who invented this? lol I waisted $20 already on 2 different sets cuz the instructions suck
This is the worst product design ever! When i lifted 2 if removed the whole screen protector off with it! The instructions are trash…
This is the worst product I ever used
Horrible tutorial. Needs more details and at least show it clearly for us to see if we do not want to hear her voice. At least I got it right in the end No thanks to this video.
This is a dude in the video, right ? Those hands act like a girl but look like a man hands.
Waste of money.
This is the worst
this sucks 😐
terrible product would not recommend
WASTE OF MONEY!
Absolutely horrible product.
Absolute trash product. Don’t waste your money.
What a piece of crap product this is!
Very bad.
HORRIBLE product, 0/10 would not recommend.
Will be returning to Best Buy for a refund.
waste $14 today ..don’t recommend