Welding Practice Why Practice Before A Welding Test
Vložit
- čas přidán 6. 08. 2019
- About Us.
Welcome to Schofield welding I am Jake Schofield. We are a traveling Welding Family. We chase all kinds of welding work through the United States. Mostly oil and gas work. Which includes Pipelines,Facilities and Fabrication. I travel With my Wife Eliza Schofield our son Baylin Theo Schofield and our two dogs Ace and Itty. Sit back while we bring you along into our world of living full time in our 38 foot fifth wheel traveling from welding job to welding job. Building Welding Beds bbq pits and anything else we can think of out of metal, and of course making money. Be Blessed
it is so important in my opinion to be the very best you can be in the welding industry. that being said you need to practice before welding tests. In this episode we are going to mock up some 6g welding tests and run through them just like we would if we where at a testing location. hope you guys enjoy be blessed - Zábava
Sorry everyone I know the music is a little louder and the wind is freaking annoying. That’s why the music is a little louder. I tried turning up my voice in the edit but it wasn’t happening. Hope you guys enjoy be blessed.
Do you keep 90 degrees on the root?
Yeah we had a good take off at the beginning got some major air on that one it was crazy.
Damn. The wind took the tent even though the sumbitch was tied to 4 jack stands. Crazy
Hopefully things will get better and work is available. With all the silly stuff that's going on good luck my friend.
Thanks brother.
I like monday morning when you're showing welding in the background.🤣😝😂
I only weld with my everlast for a hobby and it doesn't take very long before I forget good habits and lose my timing. You have some really good advice there.
Always burn them rods its always good to practice and know this it is instint when you go do your test you know what to do and you control the nerves and remember brother have fun when tour welding be safe and keep on welding
Never seen a flying Jack-stands...🤣🤣 yeah man I feel you when I'm off I spend time practicing weld tests👍
Your channel is the best man! Thanks for all the help!
Let’s all just admit we all wanna be as relaxed and comfortable as this guy when burning rods 😂
haha Thanks George.
Yep that would be awesome.
Good advice on grinding a valley on the upper side of the cap especially when you use 7018. Great video but did not film The left-handed side. Keep up the good work
Great video Jake have a great day be safe.
I enjoyed the pipe cutter also
Great video 🔥 💨 RIP tent ⛺️ . The grind don’t stop tho!!
Hope all is well man, excited for your videos to drop. I do all light gauge stainless parts for marine app, cool way of saying I weld gps mounts lol. Keep it up brotha
Man that shade pop up helps soo much.... lol
You're the man bro
Good job..
Hell yeah! I love the ISOC shirt man! I used to race the series up until last march! Also what do you do to your bed to make sure you dont fry electronics on your truck when you weld off it? I'm gonna be building a bed in the next few weeks here and have always wondered about that
Hey Jake. Could you make a video on RV lifestyle. Maintenance , monthly overhead, RV camps etc.
I'm planning on purchasing one in the near future and would like to get a better understanding of what it takes to own and maintain.
Also, do you know of any online sources for finding RV camp locations while on the road?
I was just wondering when you are welding and you're grounded through your truck does that hurt your trucks computer system? Is there something special you are supposed to do other than unhooking the battery? Thanks man really love the videos
Nice Jake
By the way love you welding jacket its bad ass its all good custom made
Good video man
Im currently practicing my 6g as well, just having problems with my cap. What is your method to cap? Hot or cold?
Love the videos man always educating the people and showing people how stuff needs to be done right and how practice makes u a better welder in this field #practiceiseverything
Good stuff man, another solid tutorial. Do you need any certs from API or AWS to get out into the field? Or is everything you do just an employment test? Thanks.
SCOTT Allen i might be wrong with oil field, but most contractors in power and shut down industries wont look at the certs you have, they will always test you to their standards, and or have you take their cert tests following the hire in test, this in no ways could be how pipe line does it besides the hire in test
Can you tell me about your roll out wheel? Did you you make it or purchase it.
How come you guys dont do side jobs. A good welder is always needed for different things. Structural builds and repairs. I am just starting to get into welding as a hobbie and i see so much potential. I am a carpenter by trade and welding has so much potential
Who says we don’t do side jobs?
love the jams brotha whats the instrumental playing
That’s a cool weld shirt where did you get it from? Also I’m your other videos that has the native pattern on the rim is awesome. Where do you your weld caps from?
Bluecollarcaps, She's the best, some of my most comfiest weld caps for the summer!
Does she make those shirts also?
@@daviddunca6886 nope! Thats UpInSmokeWelding apparel
Jacob: New welder (home) Is it worth the money to pay for Grade RM versus Grade R (Acetylene only) 1/4" x 50'. Recommended brands for rubber hoses.
How do you hook up your tig rig to your machine?
Does the pipeline hire laborers? My dream job is to be a pipeline welder but getting a job with the pipeline has been very hard
I wanna be a pipe line welder and I couldn't find a job as helper I started working at a pipeline as labor setting go post and building fences but hopefully I can become a helper soon
Howdy brother. Which discs do you use to grind your tacks? Love your videos man.
Haha, wouldn't you know it. A couple minutes later you answered that very question.
Awesome tutorial Jake 👍! Some very nice tips. Thanks for sharing buddy 👍 🇺🇸
Practice makes perfect if not it’s pretty close to perfect
When you get a chance could you do a video on the new pancake? Or could you do one comparing the last 3? Cody’s. Cmr. And abovewelding. Please sir I’d really like some feed back
ChasinDreams above welding... yes I will but so far I love this above welding hood
Jacob Schofield awesome man appreciate the feed back. Y’all keep doing what y’all do it sure does help a lot of us out 🤙🏼 god bless
Another excellent tutorial
Good luck to you. Can't wait to see what's going to be next.
Is that welder diesel? Should u get a diesel powered welder for the pipelines?
Diesel is best 👌
What’s the best amperage for a 5/32 cap?
Hello my friend. I have a recommended song for you to check out. The name of the song is Milestone by the band Nonpoint. To me it relates to my career goals. Thanks Thanks for your videos. God bless you out there!
Sincerly, Patrick Cagle
I will look into thank you
Renewing the muscle memory and knocking off the rust . When tacking It also helps to feather out your key holes so they are very small to tie into . other wise tip your rod back coming into a big key hole. I've even reversed direction to fill in a initial tack key hole . Keep up the good work Jake
Where did you get that pullover welding jacket from
It has the "Up in smoke" badge/label
upinsmokewelding.com/
Just curious, how do welders get pipe to practice on?
easy there is always leftover pipe at the jobsite. brotherrrrr
Scrap yards too. I got a 6.5’ long drop of 8” schedule 40 for less than $40
Can we get a new bed walkaround
sweet video, awesome to see the hole weld and fit up/tack.
No way did that really get all four jacks holly you know what I’m welding in Colorado and have not seen that wind yet but I’m sheltered a bit
What brand of shirt is that man? I need to get me some. My shirts are getting ate up quick
Up in smoke they are freaking top notch
@@JacobSchofield So, what happen to the bottom part? Wasn't that a button up shirt before? haha!
2:30 lolololololololool
thanks for sharing.. practice makes perfect!!! my dad was a welder, went to Lincoln electric welding school on a scolership (this was in the 40s) I grew up welding & would get so pissed off cause he could listen to the machine & the "bacon frying" sound of the arc & tell me I wasn't doing a good bead!!! LOL looking at it now I can do the same thing.. we went a different way with the plumbing business & do less welding now.. I really miss being able to get out & run a few beads.. a few times a year I will fire the old SAE 300 up & burn a few rods just to see how bad I have got!!! but will pick it back up after a few minutes!!LOL I enjoy you videos keep up the good work!!
What brand of shirt is that???
What Music was Used?
anyone know the song from when they start cutting and grinding
Love it. I wish I was there turning and burning with y'all!
Also, what is this "Helper" business? I never had a helper in all my 40 years of welding large diameter steel Pipe. Did everything myself. From Rig set-up to layout, to grinding, cutting, fitting and welding, complete with all the grinding and buffing necessary.
You all might want to lay-out a 60" combined two cut miter all alone. Then cut, grind, fit and weld it all in one shift, alone.
From the way your messages are coming off I’m taking it, that even if they did offer helpers nobody would want to work with you anyway. A welder helper is a way for someone that wants to learn how to weld to basically apprentice under someone to learn a trade to better there lives. But it Sounds like you didn’t do anything to help anyone?? But congrats on the career. I imagine your still working alone. Have a great day.
Nice video keep up the good work like the way that you show people the way that it needs to be done it makes it easy if you have a good teacher Jacob you have teach that a lot of people it was funny to see the canopy go flying I thought it was going to take the camera out
😎
Where is the Chevy Gassar ? ?
Hey man do you know anyone needing a helper? I’m trying to get into the industry.
Any luck yet mate?
I never seen a video about the new truck! Looks sharp!
What kind of shirt is that ur wearing, the weldin shirt, and where did u get the flag thing on ur hood strap?
Thanks for the video and explaining everything...👍👍👍👍👍🇺🇸🇺🇸
What kind of long sleeve pullover is that?
I like your beard bro
Thank you sir
What brand of stands do u recommend? Just for shop use
I have step my downhill game up, good lookin welds sir.
Another banger video Jacob👌🏻👌🏻
Hello
Practice or just maintaining the level???
Always getting better
@@JacobSchofield Do you need an adapter for rollout wheel to truck???
Pipe line in bellfouge SD and running through mt,nice truck, bill wy,and Douglas wy, don't you love the wind?.
Do you have pictures of jeds roll out wheel set up
What is that your wearing, not hating
Gas tank on its side ? Left truck
No sir. I think your seeing his oxygen rack
I thought the canopy flying away was like an edit to make the clip a little funny😂😂😂😂
Jacob do you allow welding picture from your viewer's
Of course I wount post them usually but yeah for sure. I always like seeing what others have going on. Schofieldwelding@gmail.com
As soon as I can figure out how to send the picture
That easy up blowing away with the jack stands was hilarious. That sucks tho lol.
Jacob, where did you get that shirt? I want to get one
I thought the tent blowing away was edited LOL
Practice, practice, and practice got it 📝👍🏼
2:30 CZcams needs two thumbs up because you would get it when that pop up takes off, Do Good Work on that test and you got it.
Your hot pass would actually be your filler
Yes you could say.
Jake bro can you do tutorials like when your on weldtube bro no music just talking and explaining like hjalmar used to do.
The First thing I thought of when I saw that weldin shirt was....its different ..and also..1 little two little three little indians.....4 lil5 lil6 lil indians...7 little 8 little 9 little indians..just sayin Bra...
love ur vids but damm man get a damm pop filter for the microphone shieeeetttt
How come you don’t follow main line
This pays more and is more stable with longer lasting jobs.
Nice shirt,, lol. Looks like stand with fist from dances with wolves
You need one of the fuzzy things on the mic to help with wind noise
I was able to get some nice arc shots using my phone and a pipeline helmet
Like ole Mr. Cash says, "Get Rhythm".
lol
Classic
Ya'll shore like to practice with those pretty lil welding rigs I didn't need to practice I was good enough to pass the first time and those rollout you wouldn't make it offshore
David Leblanc Hahahaha I’ve met a couple of you Leblanc’s from Down south. Sounds like a whole lot of talk lol but you do you little lady...
@@JacobSchofield son no comment I was welding long before you was born
Yeah yeah yeah!! Been running your mouth even longer haven’t you? Haha 😆 golden arm!! “Didn’t need to practice, Good enough to pass the first time” 😂 😂 I’m serious rolling right now. A little to cocky for me sweet heart. You keep doing you. Let everybody know you never had to practice and just some how you are good enough to take and pass a test with no practice first time. I call BS. 😂 but for the rest of us no welding welders who couldn’t live up to your standards, great news, I hate water. So you can keep that stuff all you want... and you can get on peoples CZcams channels and keep running your mouth in the comments section.have as much fun as your little heart desires. Have a great day. Be Blessed. Stay safe out there. Keep making that money.
Keep practicing because that shit is welding
Big fan of gay and lesbian hating chick fill-a!
What????
"Why practice before a welding test?" No need for real welders to practice. Welding each and every day is enough "Practice" for anyone. What the hell is this? Any welder worth his mettel should be able to rip out a test and show up at work on time the same day. Do they really pay you guys?
Hahaha have a good day hope you feel better now that you went on your rant. Be blessed
Can you please turn down the music. I can’t understand what your saying half the the time I’m sorry