Why not through bolt them with a Nylock nut on the back side. That is what I did. I also reinforced the area with a 2"x4"x1" thick piece of marine plywood. That was 8 years ago. Never a problem since. I also did this with the cleats and windshield mounts. Nothing comes loose again. Of course used all stainless hardware. I do like your solution if you were dealing with a blink area and didn't have access to the backside.
Thanks I did this and it worked perfectly. The wall hangers were size #7
Why not through bolt them with a Nylock nut on the back side. That is what I did. I also reinforced the area with a 2"x4"x1" thick piece of marine plywood. That was 8 years ago. Never a problem since. I also did this with the cleats and windshield mounts. Nothing comes loose again. Of course used all stainless hardware.
I do like your solution if you were dealing with a blink area and didn't have access to the backside.
You did it the best way 👍🏼
Do you know if this ever caused stress cracks?
@@-BUFFALOMan thats a thinker
Hows has it held up
Still holding and haven't had to tighten 👍
Yea, good method.
Will they rust in saltwater?
There lead anchors, mine are doing great