Xinmeng m71 PE Foam MOD / hello! MOD m71 (AKKO V3 piano Pro) SOUNDTEST
Vložit
- čas přidán 27. 07. 2024
- 🐈コスパの良いキーボードを買ってそのままなんて勿体ない!
🐈Let's MOD
😸100均で購入したPEシートをcase内部とスイッチクッションとして使用
😸他はスタビライザーの調整とTapeMOD、サイドLEDウインドの振動対策
🐈個人的にはふんわり感欲しいので、スイッチシートそのままで
TapeMOD外してケースフォームだけで変えてみようかなと思ってます。
2㎜くらいのシリコンあればそれを入れたい。
😿長いので打鍵音だけ聞きたい方は 34:12 へGO
誤字とかkeycapはめこみ違いありましたらすいません。
🐈stock switch INFO
white jade shaft(outemu)
Type: Linear
Total stroke:3.3±0.3mm
End foce:55±10g
Trigger strorke 2.0±0.6mm
Operating force 45±10g
🐈もくじ
00:00 - 冒頭 STOCK打鍵音
01:17 - MOD開始
02:47 - Force break
05:39 - スタビライザー調整
12:57 - スタビライザーテープ巻き
14:09 - スタビライザールブ
17:52 - スタビライザー取付
21:11 - テープMOD
22:03 - 組み込み
24:39 - SOUNDTEST テープMOD
26:40 - Switch Foam 変更
27:43 - プレート分離
28:20 - PE シート加工
30:07 - 組み込み2回目
32:12 - SOUNDTEST Switch PE Foam
33:58 - Switch変更作業
34:12 - SOUNDTEST AKKO V3 piano Pro
36:11 - STOCK Typing
37:31 - テープMOD Typing
39:30 - Switch PE Foam Typing
41:07 - ご視聴ありがとうございました。
🐈Amazonで在庫が復活しています。20230920付
amzn.asia/d/46sPToa
アフィはつかってません。
😿AKKO SPR67 springマウントの65%キーボードが気になりだしたこの頃
液晶搭載したりとドンドン進化していってるので少し様子見しよー
😸素材
音楽:BGMer
bgmer.net
#2023 #カスタムキーボード #アルミフレーム - Jak na to + styl
キーキャップがとてもかわいいです。
Thank you for your comment.
The PBT cap is compatible with a full keyboard, so it was a great value.
It doesn't feel bad to the touch either.
Отличное видео👍 огромное спасибо за полезную информацию.
そもそも元の音もめっちゃいいですね
そうですね、少し気になる事はありますが、ある程度は調整できるキーボードなので自分の好みにすれば良いかとおもいます。
Великолепное видео!
ty bro
everything change when the PE foam putted, nice job and nice differ
I don't have a good understanding of English, so I'm having difficulty with my responses
I felt that this keyboard resonated well with the PCB, so I placed PE foam under the switches, and it improved the sound quality to my liking. Currently, I have removed the tape and added 1mm silicone inside the case, and I'm using the existing PORON
What thickness pe foam
Daiso cushion 1.0mm
what's the 3 led indicator for? and can you turned it off when using it wireless?
The answer is NO
Upper row Caps lock, middle row WIN lock, lower row Status Charging Wireless connection
intentionally set to shine
If you do not want it to glow, please disassemble it and remove the solder from the LED.
If you cannot disassemble it, put tape on the case.
only physically possible
If you are interested in this keyboard
I think it would be a good idea to try FR4 with SUGER65.🐈
@@toronyago-yt how many hours approximately until you have to charge it with the backlight turned off?
yeah, I like sugar65 but need wireless connection too.
Between this xinmeng m71 and cidoo v65 which is better for the sound and their aluminum case quality?
@@chasevanderzalt8693
Charging time is unknown.
I don't own cidoo
Sorry I can't help you.
@@toronyago-yt that's ok, thank you bro
この改造に使った道具・素材など教えてくれませんか?
六角レンチはH1.5
フォースブレイクやPCBとかで使用しているマスキングは
ホームセンターで塗装用?
スタビのグリスは信越シリコーンG30L
スタビの音が気にならないならそのままで良いと思います。
PEfoamは100均の食器クッション
筆とかは家にあったやつです。
@@toronyago-yt 教えて下さりありがとうございます!
ネジを外すドライバーってどこで購入しましたか?
Amazonですよー
【PENDORAシリーズ】 Bright DIY 電動ドライバーセット 30 in 1 電動精密ドライバー 小型 ペン型 軽量 静音 USB-C 充電式 LEDライト&正逆転3モード切替可能 専用ケース DIY付属キット付き 精密機器修理 PENDORA 36E
3000円くらいでした。
お手数ですが、このネジを外すドライバーの形、大きさを、教えていただけないでしょうか?
固定ネジは六角M2です。
レンチは六角の1.5mmを使用すればよいです。
上部はネジ頭まで深さがあるので全体的に細いのがおすすめです。穴径4.5mmほど🐈
ありがとうございます😭
形や、大きさなどが分からなかったので
助かりました!
Sinnfrei.