TF Series Sub Woofer Control

Sdílet
Vložit
  • čas přidán 28. 08. 2024
  • Two quick ways to adjust the level of signal going to your subwoofer.

Komentáře • 7

  • @rudyamaya3730
    @rudyamaya3730 Před 3 lety

    Hi hope you doing well
    I have a question about the subwoofer….
    is is possible to assign subwoofer in a individual channel or we can only assign in stereo only
    Cause We was trying to assign in only one aux from 1 to 4 but the mixer don’t let us do that
    But the mixer onky let us do it in stereo L and R
    If you know the way to assign in only one aux route can you make a video doing that

    • @advancetechsystems3550
      @advancetechsystems3550  Před 3 lety

      I don't think you can assign an aux output to the sub. You need to assign individual mic or line inputs to the sub output like what we sow in the video.
      Are you trying to assign the sub woofer to an output?

    • @rudyamaya3730
      @rudyamaya3730 Před 3 lety

      @@advancetechsystems3550
      Hi thanks for the answer
      But I am talking about when you assign your subwoofer omni out I can do it but only in stereo omni out
      But don’t let me do it in only in single one aux omni out
      Thanks for your help and we have Tf3 in our church

    • @advancetechsystems3550
      @advancetechsystems3550  Před 3 lety

      @@rudyamaya3730 I can't make a video at the moment as I am on the road installing a system. I know you can assign it to any omni out but I normally least in stereo and use 13 out and just ignore 14 out. I am installing a mixer now so I can double check all that.

    • @rudyamaya3730
      @rudyamaya3730 Před 3 lety

      @@advancetechsystems3550
      Hi thanks for the answer
      You don’t has to do it now
      When you have a chance
      It will contribute a lot us
      Thanks have a nice day

    • @advancetechsystems3550
      @advancetechsystems3550  Před 3 lety +1

      @@rudyamaya3730 Hi there, I just checked on the mixer I am installing and was able to assign the sub to omni out #8. I checked and I can assign it to any of the omni outputs. I will try to do a video as soon as I can.
      Thanks so much