expansion valve removal altima 2007- 2015 a view from the fire wall
Vložit
- čas přidán 18. 07. 2022
- REMOVAL
Evacuate and recover the A/C system refrigerant. Refer to "HFC-134a (R-134a) Service Procedure" .
Disconnect the air cleaner to electronic throttle control actuator tube. Refer to "AIR CLEANER AND AIR DUCT" (QR25DE), "AIR CLEANER AND AIR DUCT" (VQ35DE).
NOTE: The tube is located between the air cleaner assembly and the intake manifold and is removed to access the expansion valve.
Disconnect the A/C pipe from the expansion valve.
CAUTION: Cap or wrap the joint of the pipe with suitable material such as vinyl tape to avoid the entry of air
Remove the expansion valve.
INSTALLATION
Installation is in the reverse order of removal.
Expansion valve mounting bolts : 2.9 - 5.0 Nm (0.29 - 0.51 kg-m, 26 - 44 in-lb)
CAUTION:
Replace the O-rings with new ones, then apply compressor oil to them when installing them.
That helped a LOT. Thanks buddy!
that was simple now all i have to do is put the motor back
Good one 😂
LMAOOOOO
Did not change mine. But that was the hardest AC I worked on. Compressor had to be changed by feel... And entire dash dissasembled and removed from the vehicle to get the evaporator core out