Element Ecto Best Cheap Mod! Do Shock bands work? Initial thoughts
Vložit
- čas přidán 27. 01. 2024
- Checking out a very simple,cheap mod for the Element Ecto. Do shock bands really work and should you buy them? Watch this before!
Element Ecto found here
bit.ly/47W3itY
35kg servo found here
amzn.to/3UicLsn
45kg servo that is a solid replacement
amzn.to/3HCh8qP
Hobbywing Fusion SE found here
bit.ly/3rVc7FP
Injora 1.9 wheels shown found here
amzn.to/3OmTFxL
Jconcepts 1.9 Ruptures found here
bit.ly/3H2mkDW
Proline dual stage foams I use found here
bit.ly/49b7G9H
Hobbywing Ace system shown found here
bit.ly/3FD3u60
To contact me about reviews or questions email me at 2fastmattracing@gmail.com
I finally have Merch!!
Be sure to check the sizing chart and maybe size up on those Hoodies.
Check it out at the website below!!
2fm-rc-shop.fourthwall.com/co...
Don’t forget 2fmrc at checkout for discounts at most of your favorite shops!!
HELP SUPPORT the channel by clicking my affiliate links below and then shopping at no extra cost to you!
Thanks for any help!
AFFILIATE LINKS BELOW
Horizon Hobby affiliate link
bit.ly/3eXihxY
Amainhobbies affiliate link
bit.ly/3CurIyF
FairRc affiliate link here
shrsl.com/3qxuc
FMS Affiliate link here
www.fmshobby.com/jsVeIxtdZHBb...
Amazon affiliate link
amzn.to/3I4tQzI
RCAWD affiliate link here
rcawd.com/?ref=FaSRjm2T
Other DISCOUNT CODES BELOW
FMS discount code is 2fmrc
$10 discount is only applicable to the purchase of complete all vehicles and accessories, and can only be used when the amount is over $50
Injora Discount code is 2fmrc05 for 5% off
MofoRC discount code is 2fmrc
Fullsendrc discount code is 2fmrc
RcAWD discount code is 2fmrcawd5 for 5% off
~-~~-~~~-~~-~
Please watch: "Injora Lights for SCX6! Super Bright & CHEAP!"
• Injora Lights for SCX6...
~-~~-~~~-~~-~ - Zábava
Like always always bringing the best thank you brother always information filled videos and awesome content you do a great job thank you brother
Happy New Years bro. I like your channel bro
Man I love these videos Matt 👍👍😎 Hope to see more
Thank you for this! I’m always looking for advice on my gatekeeper. Would love to see more on this truck! I would like to see some shock tuning with this too
See when you take your time 😁 That is a great spot straight down off of that backside of the rock love it
Thanks for the 2FM band mod!
Works great on my 10ii.
Heck yeah! I’m running the same on my ascent lol
@@2fmrc also added them to my BaseCamp but haven’t had a chance to run after adding them.
a group I run with swears by the ecto and zuul. when i looked at them myself in person, played a little with them. I said no. I think the price is too high for how they come in rtr. I think a better value is the enduro SE (same price as the ascent) and so much easier to upgrade compared to everything else I've seen.
Good video.. thanks for posting your thoughts.
Sweet man 💪
Yeah awesome Matt, I was fixing to ask what was that cage chassis sitting there all silver awesome I’ll watch for this build 👍👍😎
All the companies that make the option parts for our crawlers. They must be cringing at this video at all the money they lost. They would have come up with some contraction. That does the same thing. Then make it a set for the front and rear. @$40 bucks each!! They lost a ton of money!! Thanks For Sharing!!🙏🙏🙏👍👍👍
What a great idea. "KISS" I guess. Been using rubber bands, but this is great. You spent allot on it, please show us more of it
Yeah the second time’s the charm, I’m back I had to go to the gas station and back that was awesome
I'm a 1/24th only guy, but good vid and always give you a thumbs up!
I really appreciate that more than you know. It helps a ton! Thanks for the support 🙏
Hey Matt, wassup brotha! Cool vid! 👍🏻
Wassup?!!! Thanks!
The ecto is one of the best rtr out there. Just a cheap esc, i used the isdt esc70, and servo, I use a 35kg ebay, makes the ecto work like it should.
I lowered the shocks as much as I could. One of my favorites for sure
That is an amazing mod. Cheap and easy. I am going to have to see if I can steal a tie or two for Ecto. I guess yours was not put together correctly, as my Ecto has been nothing but a pleasure to drive. I did replace wheels and tires though.
What a great idea, i
AWESOME HOODIE!
Thanks! It’s super comfortable. A little thinner material which is usually what I prefer.
That axe system is way overkill for that little truck. That being said, it is going to be awesome watching thrash it like red headed stepchild, lol. Keep it up Matt, loving it
Haha! Thats exactly why I went with it 😆
The shocks on mine were basically empty. They are really good with oil. I ran thicker in the rear with trailing arms. With shock tuning, my go to truck.
Yeah this one feels like they may be empty as well. Very soft lol
Just thinking out loud here: Might be interesting to do a comparison with running those same hair bands as you've got them. But then try running just one in the center on each axle. I've see a number of guys in vid's run one or the other using office rubber bands, hair rubber bands and even just a static strap. It always seemed like having the band in the center sucked up the axle as desired, but let the wheels drop much freer and easier than with bands on all four corners. Kind makes sense. The band is at the pivot point, inline with it, rather than working against it at the end of the 'lever'/'momentum' arm.
Cheap to try and would be great to get your unvarnished thoughts on both methods.
Thanks Matt!
Bert
Yeah I should try it. My theory has always been on side hill the center strap lets the body still roll a lot vs on all 4 corners it stays planted better. The center strap definitely gives a bit more flex but it seems to still allow a lot of roll side to side. Works great for straight up hill or downhill though. I’ve ran both and kinda preferred all corners as long as they aren’t too tight but I’ve never directly compared them so that would be a good test to run.
@@2fmrc That makes sense regarding side hilling. Another variable, as a sort of 50/50 triangle might be with the band mounted to the middle on the frame and out to the ends (or half way) of the axles. Maybe. Definitely a rabbit hole of possibilities! LOL!
Yeah I don't limit my rear end ever but my front end I always slim it but you know what I'm talking about bro I don't run 10th scale I run all 24th and 18
Best mods I did to my Ecto, is ditching the trailing arms for 4 links... Night and day!
Yeah I kinda wanna keep the trailing arms on this one. Just thought it was cool for a hill basket type truck
Mine has fusion pro, a nice servo, steel wheels, proline tires with heavy inserts. Stock shocks and it sits fairly low and has only an interior and light kit on the body. The truck performs well though, closer to your banded than your stock on that first rock. I would like it a little lower. How is the 4 band better than banding the center (2 bands) ? I haven't tried either.
I like to band each corner because on sidehill a band in the center still lets the truck roll to the side sometimes. Where the bands on all 4 corners keeps it tucked better.
I asked my wife for a pair a hair bands to try this mod and she wanted to charge me $40 😂
Haha! Should’ve known that wouldn’t be free 😆
That's cool that she knows the market and what those bands are worth, my wife dgaf about rc anything haha
@@patrickgeorge4306 same with mine! Lol
That's too funny. I wish my husband or son would give a care about rc. My husband will help w installs when i get in trouble, but that's about it. I'm enjoying experimenting with bands on my ax 24.
Thanks Matt👍😉
Wait, what is that SCX6 cage!!!?? 😍
Vitavon 🤘🏼
@@2fmrc 😍 but holy lots of money!
The stock motor, esc and transmitter are garbage (I replaced them with FUSION SE and DumboRC). The stock tires and the servo are mediocre, you don't need to replace them ASAP. Shocks need more oil in them, they are almost dry out of the box. Replace the two front springs with softer ones. Add 200 grams of weight to the front (e.g. via wheel weights). Overall, I think the Enduro SE is cheaper and a better platform to upgrade.
I agree 100% with the mods. Exactly what it needs!
My friends have built red cats and this out the box with rc 4 wheel drive tires did better
They need help building those cats! Lol this is an ok truck but just ok imo. I didn’t keep mine long. Just wasn’t impressed
At all the videos that I watched it seems like all these RTR‘s. They’re CG is way too high and if it’s not way too high, it’s all over the place because of the untuned shocks
Yeah this truck needs the shocks tuned probably worse than any of the decent rtrs I’ve ran lately. It flops around everywhere out of the box lol
Oh man then you go and mess it up what 😁😁👍
You 100% need to sell these lol
I think he just did.