Crank But Wont Start! Replacing A GM Fuse Box(code p1682, p0689, p0443)
Vložit
- čas přidán 8. 08. 2020
- Terry goes all in after the Trailblazer SS stops running. after testing and researching, the fuse box is known for leaving many TBSS owner stranded. Terry shows step by step on how to replace the fuse box and get you ride up and running! Enjoy..
Link to New GM Fuse Box 15141559.
amzn.to/3jWM3pH
Remember, Subscribe and Like All the Videos..
Watch for more Garage Shop Videos Catch me on:
CZcams: / coverman66
Facebook / jaggieman
Instagram: / terrylsx
Subscribe Here: / @coverman66
Thanks for all the Support.. Much Appreciated... - Auta a dopravní prostředky
I had the same issue 3 years ago. My fix was I took the fuse box apart and replaced the wire inside with a doorbell wire. I had to strip about a 12-in length of doorbell wire and lay it in the track of the broken wire. I think the whole fix cost me about $5. This is definitely a great video for anyone who has these diagnostic codes. Keep posting videos my man and thanks.
thanks a great plan.. i will try that on the original one.. thanks for the tip..
TBSS sounds FANTASTIC!
Wanted to say thank you for this information. I have a 2013 Traverse and my vehicle would periodically shut off, sometimes start right back up other times up to 10 minutes with a P1682 check engine code. The diagnostic tool said to replace the ignition switch which I did and still would periodically shut off. Watched your video went to the dealership to get the exact part number for my vehicle then bought it for half price on Amazon, installed and the problem fixed. Thank you! Thank you! Thank you! I was so close to junking my vehicle and know it runs fine.
that comment made my day brotha Mac.. thank you
You deserve a LOT more views and Subs Terry!
thanks brotha, much appreciated..
Ooffff the idle sounds so good!! Good to know of this trailblazer issue tho!
thanks brotha PF.. whats good?
Good info and I love the cowl hood!!
thanks brotha Mo.. took a while to get it lolol
Good job 👍🏼 and the sound man it just sounds good 👌🏻 🔥🔥🔥 . Your friend George god bless
my appreciated brotha George.. thanks..
Sweet view brother keep up the good work
always partner.. thanks brotha Davis.
top stuff as usual, well done
Thanks again! much appreciated brotha
Hey Terry, you had me worried at first that something went wrong with the trailblazer after all that work! But in the end was a defect beyond your control. I have a feeling I will someday have the same problem in my 04 Tahoe
thanks brotha Rob, i appreciate the concern and confidence brotha..
Helped a lot great video!!!!
glad to hear tHayden..
Hello Terry, I think you're the only person on CZcams qualified to answer my question. Can you tell me what would I gain hp/tq from adding a LSA to a L96 (flex fuel version of LY6)? Thanks in advance. Great channel and subscribed.
the the same cam and heads. i made 460/430 after the LSA install it was 630/620. at the wheels.. its all about the set up brotha.. hope this helps
I'm having the same issue with my 2013 gmc acadia, I'm gonna replace the fuse box,I think that will fix my problem, thanks for the video God bless you 🙏
thanks Brotha Antonio, keep me posted..
That is one sweet sounding truck
thanks brotha Jeff.. much appreciated..
Thank you! excellent video.
much appreciated Audrey. thanks..
Thanks for this video... Now I need to get the fuse panel and step up and do some engine mods... Mannnn your truck sounds good...
lolol thanks brotha Greg.. much appreciated.. keep me posted..
@@Coverman66👍🏿 Will do... Once I get a new one, I might take a chance or repairing my faulty fuse box..
Im going thru this now thanks for the vid 👍
Glad I could help
Terry nice work and now I have to go and listen to so me Maurice White I'm also a Sagg we share that same birthday truck sounds good one day I hope to hear it in person be well Terry!
much appreciated brotha Rob
Sounds great..bad ass !!!!
lolol thanks brotha bill..
Good job !!
much appreciated brotha Zelly
Thank you for this video
My pleasure.. ty
Fellow Sagittarius - nice touch!!!
lolol my brotha Hersh.. you like that.. i thought you would..
Thks
Just had to replace the fuse box on my 2005 C6 Corvette. This is a common issue across the GM line of products. Easy fix if your know what you’re doing. Otherwise it’s probably $1,200 or more at the Chevy dealer. Great video. Solid info. Thx.
Wish I had this info two years ago when I had the stealership do mine. And yes very common with the Trailblazer and like vehicles.
sorry brotha browm..
coverman66 Just keep the Videos coming coverman
Great Video Tanks! 👍🕭
Glad you enjoyed it
I have an 06 Cadillac dts. I'm getting the code p1682. Changed multiple parts due to the mechanics I chose.I then changed the ignition starter switch and ecm/crank fuse from the fuse box under the hood. Crunk up and drove away. It was a crank no start. Drove for 1 day and unfortunately I got the same code today. Went and got a new switch replaced it and the fuse same thing.
I have 2 fuse boxes and hello terry 😊
Bro same thing happened to me 😂 didn’t want to start at work. Towed it to my house! Boom it started. Ig i need to change that fuse box. And I have the exact same codes on my check engine light. Thank you for this video 🙏🏼🙏🏼
thanks brotha.. keep me posted.. let me know
Having the same issue ! Man I was driving and as soon as I was parking at home it just cut off and I scanned it code #p1682, p0689,p2101 Thanks for the video coverman 66 ,I hope this will help me and others oh by the way when my engine cooled down it started right away . So yeah we have the same exact issue lol
please keep me posted.. id like to know how you made out brotha Chino..
@@Coverman66 hey coverman bought the fuse box installed it today and everything was working fine but then engine light came on started flashing car was shaking and stalling almost shutting off , I scanned it code P0304 just replaced spark plugs and wires , so I think the coil in cylinder 4 is bad.
I had an 07 trailblazer 5.3L v8 and color as yours
This is perfect because right now my car is running on a paper clip in the fuse box I think I need to replace mine LOL
my any means necessary. do me a favor take a pic of this, i want to possible do a video on this.. thanks brotha
coverman66 I will send you the pic in the morning 💪🏽
@@johnkidd5867hello how do I do the paper clip method I’m going through the same thing
Hey man when I entered the part number you provided it says it doesn’t match my truck .. I have a 06 tbss any advice on getting a new fuse block? I would greatly appreciate it thanks
Still impressed 👍🏾
much appreciated brotha Regg.. thanks
Lmao!!! Your crazy brother! 😆😂🤣👍
my brotha.. whats til you see the Rear Control Arm video coming up lololol
Where can I find that new fuse box link doesn’t work anymore??
Hey I'm trying to find out that supercharger that you have on there what is it and how much you think it would cost for me to do that for my truck or you could install it let me know
Just had a similar issue with the yukon! The main power source had corrosion on the metal connector i clean it off and it fired up !!
you know it.. i figure just replace it.. being it was from 06.. whats good brotha Rob.
Same ol big T!!! My bday is tomorrow ill be 41!!! I feel the back pain already
Happy Bday Rob.. Enjoy and have some fun.. worry about that back pain at 51 lolol
@@Coverman66 DIGG IT!!!!!!! MY MANZ!!
Where did you order the fuse box from? I think I'm going to replace mine also I'll just feel better knowing that the whole panel is new I drive this truck everywhere and being stranded in the middle of Ohio with no cell phone service really sucked LOL
Any know where I can get a fuse box similar to this one ??
Hey there Terry,
I hope your'e well and strong.. So I'm confused. If it's fixed, great! But what's the exact problem here? In other words, if it's a common issue, I understand that even with the new fuse box you have bought the same problem could persist anytime in the future? Because the original fuse box you had seems decent. In short, can someone point out the specific issue here? For example a burnt connector or relay that is physically evident..
Anyway, keep posting brother!
Yes there is a specific issue they are multiple copper wires inside that fuse box . When copper wire heats up, it causes the fuse box to go haywire engine would turn over but won't crank . So the reason coverman bought a new fuse box is the same reason I'm buying one because if one copper wire goes bad the ...soon or later other copper wire can go bad as well.
a few things, the heat will expand the metal in the circuit board. could once the board cools down the connection is re established. also the relays on the board could get lose and not make a great connections. these are reasons ive heard..
I have a Chevy impala and the engine light is on and it said 0443 and we fixed it and we clear the codes drives great and then you turn it off and here come the same codes what do I do I can’t get inspection
Hey brother the same exact thing happens to me yesterday. I was blasting the ac yesterday on a hot day and my engine shut off. Few hours later it cranked back on. I will be trying the fuse box replacement. Where can I buy one? Thank you
Chevy dealer can still get them. i got mine online.. its in the description.. saved me some bucks..
Good video brother!! I've had this problem for 6 months now and now I know it's the fuse box because I move it and my 2005 chevrolet trailblazer 5.3 turns back on!. Did this fix the issue permanently? Have you had any problems with new fuse box?
keeping the fingers crossed lolol thanks for the compliment..
👍
my man..
Also i need that 👕!!!
whats good brotha Rob, seems like this is a bigger problem than i thought..
All is well!! If you got Merch for sale i’ll support my brotha!!!! Doing another swap for my buddy we got the motor in Friday when we got the engine up in the air the pump on the hoist started dumping Hydraulic oil I need to get me a good heavy duty hoist
You could be on the freeway going 75 miles an hour and once it heats up just a little bit it breaks the current because the copper circuitry breaks apart so then when it strands you and you have to get a cab home and you have to get it towed and all that s*** the next day when it's cooled off it starts right up and runs beautiful until it warms up enough to just conk out and when it comes out it just cranks but it doesn't start leave it there for a day come back starts right up like it's brand new and runs just fine
Ok soi can't get my old fuse box off because 1 screw won't come off but does it matter if the fuse box number under it doesn't match as long as it looks the same as the one I have
hmmm never had that happen.. let me know. thats a great question.
Bro I g have a 2001 Chevy silverado 4x4 5.3 liter engine making a loud poping noise what can be the problem
hard to tell if i cant hear it.. can you take a quick video?
373 views and no comments? What's up with that? Someone could have said Hello or something!!! I did basically the same thing on my Corvette... Not to bad I suppose...
thats all good.. how did yours turn out?
@@Coverman66 I got everything replaced and fixed and even drove it. Except I didn't get the throttle pedal to make the engine rev. It would only go to 2500 RPM. I heard it called limp mode. I had to put it in storage for a while till I can get back to it.
I just got a recall for that box
really, do tell..
Post the recall here
Terry so I am trying to get a fuse block and went to GMparts.com and used the p/n 15141559 and keeps telling me not for my vehicle. My son has a 2006 trailblazer ss and this has just happened to him and we are trying to find a fuse panel to replace ours. Any other help would be great. Thanks!!
Not sure if you got it fixed but that's the correct one for the 06 even if it says for a Rainier
im doing a update showing the exact wire that needs to be fix.. shoot me a email and i will give you all the info
@@Coverman66 hey. I’ve got a 2014 GMC Acadia, I know, don’t laugh. I’ve got that reduced power, stabiltrac off thing going. If you could do a vid on how to replace a connector in the block, cause it’s supposed to be due to a terminal 51 corrosion or burnt issue. Thanks bro
How much was the new fuse box?
about $180
Same thing happened to me too exactly and I tell you what I can't believe Chevrolet did not fix the problem after all those years they just kept putting the same f****** piece of s*** circuit box for the fuse and right now as we speak there's probably 1,472 people stranded somewhere because of this problem I'm so pissed at Chevrolet
What Chevrolet should have done is to just give every body a free car 'that buys a car cuz they're going to need it
8 haters
What happens with this piece of s*** is the fuse panel which is underneath the hood gets heated up and so what it does it just expands just enough to seperate the copper circuitry which is underneath the fuse panel or part of the fuse panel ..I meant to say .....and so do you think Chevrolet would have looked into that maybe put thicker copper in it or something like maybe some reinforcement .??..I don't know no they don't give a s*** like I said right now as we speak there's probably 1,472 people in this world stranded because of the same f****** problem... As a matter of fact they wanted like $500 for the fuse panel so not only are they not fixing it they're charging the s*** out of you knowing that all of them are going bad