Mazda 3 Eonon Install | WIRELESS APPLE CARPLAY

Sdílet
Vložit
  • čas přidán 26. 08. 2024

Komentáře • 144

  • @EononOfficial
    @EononOfficial Před rokem +29

    Nice installation! Thanks for your sharing~

  • @SyCoYT
    @SyCoYT Před rokem +13

    Crazy tbh. I bought the older one last May before they discontinued it and it had problems. Emailed them and they allowed me to buy this one for only $112. Coming in this week crazy timing

  • @ReubenBibera
    @ReubenBibera Před rokem +6

    Great Vid, I will be picking up an Eonon for my ride in the future. I do love the Plug and Play of that brand! Keep up the great work!

  • @ilhamyunus74
    @ilhamyunus74 Před rokem +3

    i just recently picked up a 2010 mazda 3 hatch and i was wondering how you routed the backup camera especially in the licence plate area and how do you tap into the reverse wire. If you can make a short video about that it will be greatly appreciated man as there is no clear videos on how to install backup camera for the 2010 mazda 3 especially for the hatchback variant from 2010-2013.

  • @kinlaydorji6890
    @kinlaydorji6890 Před rokem +3

    Can you show us how rear camera is connected?

  • @clockwather
    @clockwather Před 11 měsíci +1

    I remember I had bought the Q63Pro for my 2013 mazdaspeed 3 tech package and found out that most of the plugs I needed weren't there and I had plugs that didn't have anywhere to go. I ended up returning it

  • @elijah_M16
    @elijah_M16 Před měsícem

    I wasn’t able to find the other white cable in the Mazda 3 2005 I have an android 9.0

  • @masonperez703
    @masonperez703 Před rokem +3

    What do I do with the red thin in the gps input? Do I just pull it out I’m scared off breaking something.

  • @jacintajenner9862
    @jacintajenner9862 Před rokem +2

    Can it go into a Mazda 3 2009

  • @leanperc30s
    @leanperc30s Před rokem +2

    gave it a like just because i saw you listened to nav

  • @TheMadVector
    @TheMadVector Před rokem +5

    Hey Colton, thanks for your video! I just bought two of these, one for my 2010 Mazdaspeed 3, and one for the regular 3 my gf drives.
    The wiring harness is for sure a bit scary, but I'll work trough it.
    Of COURSE I will have to install the rear cameras as well. I want to ask, what's the least annoying route for the cable of the cam? Don't plan/have'nt installed a sub.

    • @ColtonRichter
      @ColtonRichter  Před rokem +2

      If you have a grommet in the trunk, probably through the driver side. Allows you to follow up the body & connect to reverse power!

  • @lifesolutionswithtania
    @lifesolutionswithtania Před rokem +2

    Great video. I am wondering if there is a way to connect the gas meter ? Or is there a unit to install that reads gas? The little lines are confusing. Thank you 🙏🏼

  • @benson6664
    @benson6664 Před rokem +1

    My dad's mazda 3 is mazdaspeed but just bodykit. Then it's original factory is mazdaspeed. It limited 999 in Taiwan.

  • @cesarguerrero1211
    @cesarguerrero1211 Před rokem

    Was looking for a video like this. Great video thanks

  • @trkovsky8366
    @trkovsky8366 Před rokem +2

    Hey man, just found your channel and I have been wondering - Did you just get the white 3? What is the spec on it? And do you know of any phone holders for it? I haven't had much luck in finding any to fit, since most of them are made for vents, which are too slanted on my Mazda. thx

  • @spencer3823
    @spencer3823 Před rokem +1

    Thank you for this man. So this is compatible with the Bose sound system I’m sure? I have the 2010 3 GT hatch and I want to make sure it will support the Bose system. Thanks again

  • @Roxtar321
    @Roxtar321 Před 7 měsíci

    Putting this on my 09 sedan, it will fit right

  • @tomaspumphrey1797
    @tomaspumphrey1797 Před 6 měsíci

    Just installed this bad boy and the sound in my Mazda 3 seems to be muffled and it only allows me to go half volume do you have any idea y?

  • @user-oi6ok8bf3u
    @user-oi6ok8bf3u Před rokem

    Hey Colton, loved the video. This help me install with ease. I’ll figure out the camera later. What is the one 10A fuse for?

  • @Auriel.Morales
    @Auriel.Morales Před rokem

    Do I have to buy a new USB port? Or can I use any?

  • @JordanJacobson
    @JordanJacobson Před rokem +2

    Will this work with Mazda 3 2012? Also does it have aux? Or will the aux built in to the car still work?

    • @ColtonRichter
      @ColtonRichter  Před rokem

      Yes

    • @JordanJacobson
      @JordanJacobson Před rokem

      @@ColtonRichter so the aux built into the car will work? I can't tell if that yes wes for all my questions haha

  • @p.j.d.8199
    @p.j.d.8199 Před 10 měsíci +2

    Thanks for putting it in my model/yr car, it helps me a lot for an upcoming purchase. It's pricier than what I wanted to pay, I was hoping to buy one w/a CD player to fit this car, one with a great rating and preferably a volume knob, but it looks like all of those are a lot harder to put in and this having the right bezel to fit this car is a definite perk. Now that you've had it awhile can you tell us the positives and negatives? Did you have to buy any extra wires, etc? What's the screen size?

    • @rugsbaby
      @rugsbaby Před 6 měsíci +1

      I’ve had my Mazda for 9 years haven’t found a cheap unit, nor a good unit. This is by far the best one you can get it’s just pricey. If you need just use after pay 100$ a check 🤷🏽‍♂️ can’t beat a modern oem look on an older car like this!

  • @CHSSTATIC
    @CHSSTATIC Před 11 měsíci

    How did you set up the back up camera

  • @MomopilotCool
    @MomopilotCool Před rokem

    Can you please tell me how you routed your wiring for android auto and apple carplay? I want to come to a nice solution so it doesn't look like shit. Also does your aux cord still work?

  • @tcb_666
    @tcb_666 Před rokem +3

    I have a question for ya: Did you ever upgrade the motor mounts? I plan on getting AWR's bundle kit but was wondering a good upgrade for the driver side mount under the battery? AWR's kit only provides the rear, passenger and tranny mounts.

    • @ColtonRichter
      @ColtonRichter  Před rokem +1

      I've only done the RMM for Mazda 3 application. I've driven a trio mount set in a Speed and it's pretty intense, down to hearing clutch chatter and feeling a whole lot more. For the TMM, you can do a basic insert that replaces old rubber. It's a pretty solid mount already as is.

    • @tcb_666
      @tcb_666 Před rokem

      @@ColtonRichter Gotcha alright. Thanks for replying and thank you for the videos; they have helped a lot in planning my mods for my 3.

  • @supermanrh3650
    @supermanrh3650 Před rokem

    Where did you wire key1 and key2?

  • @2100chevy
    @2100chevy Před měsícem

    How do u connect the reverse camera

    • @ColtonRichter
      @ColtonRichter  Před 14 dny

      Positive & negative to the reverse light, plug the other half into the back of the radio.

  • @joelchapple1
    @joelchapple1 Před rokem +1

    My favorite part was when you said "whip this out"

  • @theradisinbrowsa.k.awearer1950

    How do u have wifi when ur driving

  • @maratorres3595
    @maratorres3595 Před rokem

    Idk what I’m doing wrong then. I know it’s supposed to be a plug and play for some reason I can’t get the screen to turn on this is my 2nd radio ordered I had my first one looked at they just basically determined I might of had a defective so I got a replacement now I’m back at square one I know there’s power when I plug it in a light in the back turns on but when I look at the screen it’s all black

    • @ColtonRichter
      @ColtonRichter  Před rokem

      press the power button on the front of the radio lol

  • @Jrahim
    @Jrahim Před 2 měsíci

    How did you hook up the steering wheel controls?

    • @ColtonRichter
      @ColtonRichter  Před 2 měsíci

      Ensure all plugs are plugged into the back of your stereo.

  • @whitepearlmz7686
    @whitepearlmz7686 Před 11 měsíci

    Thanks for the video but i dont understand the part with the remote wire that you have to tap into the red wire like i dont find the remote wire your talking about and when i plug everything and i start the car the radio wont start nothing happend so i know i did something wrong but i dont know what can help me pleas

    • @ColtonRichter
      @ColtonRichter  Před 11 měsíci +1

      The remote wire is to do with the subwoofer, the radio itself is plug and play and should operate if everything is plugged in correctly.

  • @l8er
    @l8er Před dnem

    Are you able to have it automatically set for car play?

    • @ColtonRichter
      @ColtonRichter  Před dnem +1

      Normally when it connects to Bluetooth it will bring up Apple CarPlay automatically.

    • @l8er
      @l8er Před dnem

      @@ColtonRichter awesome! I ordered one for my lady. I’m excited for her to see it. Thank you for your response.

    • @ColtonRichter
      @ColtonRichter  Před dnem

      Enjoy!

  • @nicoriosg
    @nicoriosg Před rokem

    Bro, can you show how install a sprint booster or throttle controller, for the m3 please.

  • @user-ln7jf7nx6t
    @user-ln7jf7nx6t Před 11 měsíci

    Hey need help! So I have one all plugged up it powers on and works like it plays sound through the speakers but I have the medium connector unhooked it didn’t come with a plug that it fit into is that going to mess anything up?

  • @user-nm5xs3bo5s
    @user-nm5xs3bo5s Před rokem

    Just bought one today!

  • @jxniorszn8223
    @jxniorszn8223 Před 8 měsíci

    I saw another video where ppl were saying there android unit made the radio sound extremely lower. Do you believe the eon advanced the sound?

    • @ColtonRichter
      @ColtonRichter  Před 8 měsíci

      I think it's great when I use it through Apple CarPlay

  • @richolishis94
    @richolishis94 Před 8 měsíci

    Did your mazda have the bose audio? Wondering if that eill change how i have to wire/set it up

    • @ColtonRichter
      @ColtonRichter  Před 8 měsíci

      I did not no, but it's all plug and play with Bose

  • @jamesksf1990
    @jamesksf1990 Před rokem

    24 minutes ago
    Installed eonon Q63pro today on my 2012 Mazda 3 but I'm getting no power and blank screen... Check fuses, press reset pin hole, and reattached the power plug with no avail. Any hint on what I did wrong or I 'm unlucky receiving a dead unit? Did you also attach rear view camera? If so what's that red wire sticking out from yellow RCA video plug?
    Thanks Bro.

    • @ColtonRichter
      @ColtonRichter  Před rokem

      did you press the power button lol, check the ground
      red wire is signal i think

  • @traplordnermzz.-.9303
    @traplordnermzz.-.9303 Před 5 měsíci

    does this have rca cable inputs?

    • @ColtonRichter
      @ColtonRichter  Před 5 měsíci +1

      Check the Eonon product pages for images of what ports there are! :)

  • @PlayBoyOverdose
    @PlayBoyOverdose Před rokem

    same date

  • @THEMADVILLAIN.
    @THEMADVILLAIN. Před 8 měsíci

    Will this work for 2008 mazda 3 hatchback as well? I try to find a good one on Amazon and it keeps saying it won’t fit my hatch 😫😫

  • @kylekirk3092
    @kylekirk3092 Před 11 měsíci

    Is there anyway to turn off the beeping when you turn on your car from the unit ?

    • @stick3sedan
      @stick3sedan Před 11 měsíci

      that beeping is like that from the factory when the door is open and the keys are in it

  • @neilsoriano9203
    @neilsoriano9203 Před 7 měsíci

    Hi may I ask what model can fit that eonon? I got mazda 3 2006

  • @edmundquan8051
    @edmundquan8051 Před rokem

    hey was just wondering if this head unit came with the reverse camera

  • @joshuashelton10
    @joshuashelton10 Před 10 měsíci

    With the mic you installed do you have tobdo that? Being that the mazda allrrady has a built-in mic?

    • @joshuashelton10
      @joshuashelton10 Před 10 měsíci

      And also can you post a link on which back up cam goes with it..thanks for your vids

  • @sebastianalvarez6333
    @sebastianalvarez6333 Před rokem

    Will this work with my 2010 mazda 3 sedan ? Was looking at some reviews that it won’t fit and some saying it does just wanna make sure before I buy it

  • @aldoraine77
    @aldoraine77 Před rokem

    Hey bro, i've got the same model) maybe you know how to change illumination color from white to red?)

    • @bogdanpohrib7316
      @bogdanpohrib7316 Před rokem

      That’s what I’m trying to find as well, let me know if you found out please

    • @aldoraine77
      @aldoraine77 Před rokem

      @@bogdanpohrib7316 Hey Bogdan! Unfortunately, our system has only white illumination ((

  • @mylesstone5
    @mylesstone5 Před rokem

    Is this the only brand head unit you can use for a 2013 Mazda3?

  • @Turtleawesome101
    @Turtleawesome101 Před rokem

    Does the carplay/radio sound come through the original car speakers or does it come through the Eonon unit itself?

  • @davisbuilt8007
    @davisbuilt8007 Před rokem

    Would this be compatible for a speeds as well?👀

  • @joebloor1413
    @joebloor1413 Před rokem

    does this screen not get annoying with no physical buttons?

    • @ColtonRichter
      @ColtonRichter  Před rokem

      Not necessarily, use your steering wheel controls at that point

  • @ezclapz4778
    @ezclapz4778 Před rokem

    hey i got a question. so i have a 2008 mazda 3 sedan and on the back seat lights they dont work. the light only works when i mess with the switch. same thing happens with my driver side interior light. the only light that works is the passanger light. i just bought new led interior lights and i want to be able use them. do u happen to know how i can fix this to where my interior lights will work again.

    • @ColtonRichter
      @ColtonRichter  Před rokem

      Might be the switch itself isn't grounding properly

    • @ezclapz4778
      @ezclapz4778 Před rokem

      @@ColtonRichter do u happen to know how i could fix that? Possibly make a video if you could.

  • @hanala538
    @hanala538 Před 6 měsíci

    Is this 6+64 version? It seems to run very smoothly.Will there be any lag in the 2+32g version?

    • @zlic81
      @zlic81 Před 5 měsíci

      Ordered this one (8 core/6Gb/64Gb) to replace my old no-name multimedia which has 2Gb of RAM. It is horrible, if you like to wait 5 minutes for Google Maps to load or app updates to last 3-4 hours get it. For modern apps and Android 4Gb of RAM is the absolute minimum.

  • @PockeyPretzel
    @PockeyPretzel Před rokem

    Is this compatible with mazda 3 2006? Or should i get the older model of eonon.

  • @garrettkogelschatz9705

    Did you have to buy any type of dongle for the CarPlay or is it just off of the USB?

  • @alyasaali8055
    @alyasaali8055 Před rokem

    how did you get your steering wheel controls to work?

  • @jhon5454ful
    @jhon5454ful Před rokem

    Somebody knows if The steering wheel buttons still work?
    Or need something else …

  • @Mike21127
    @Mike21127 Před rokem

    Good price, about to buy one

  • @ebenezermuniz6708
    @ebenezermuniz6708 Před rokem

    That’s a nice looking unit! I’m really thinking of buying one for my 09 speed3. So the sound does improve with the head unit?

  • @PhuocNguyen-cu9yo
    @PhuocNguyen-cu9yo Před rokem

    Will this fit well on the speed 3 2009?

  • @elliottjohnson2187
    @elliottjohnson2187 Před rokem

    Can you add a link for the radio?

  • @Gabe128
    @Gabe128 Před 11 měsíci

    is this a 2010 mazda 3?

  • @amirzaied2192
    @amirzaied2192 Před rokem

    Will this fit in a 04 mazda 3?

  • @leoalvarado9092
    @leoalvarado9092 Před rokem

    Curious how did you wire the reverse camera? Did you wire the red trigger wire into something?

    • @ColtonRichter
      @ColtonRichter  Před rokem

      This specific car it was not necessary.

    • @leoalvarado9092
      @leoalvarado9092 Před rokem

      @@ColtonRichter did you use the eonon branded camera? I seem to be having an issue where the reverse camera is not trigger while in reverse

    • @ColtonRichter
      @ColtonRichter  Před rokem

      @@leoalvarado9092 Is the camera hooked up to reverse power

    • @leoalvarado9092
      @leoalvarado9092 Před rokem

      @@ColtonRichter I believe so. I ttaped into red/white wire and black cable from the reverse light.
      I followed Terry Walter's video on CZcams for wiring it

  • @_dondie_
    @_dondie_ Před rokem +1

    I hope Eonon last long. Nice tutorial btw.

  • @SrGreaserManiatico
    @SrGreaserManiatico Před rokem

    Any issues with it so far😅

  • @carldallaire1905
    @carldallaire1905 Před rokem

    Hi, I have a 2010 Mazda 3 that doesn't have Bluetooth (or steering wheel controls). Will the Q63pro plug in and work correctly? Or will I be missing some original wiring (from the car side of course). Thanks

  • @teamshady2438
    @teamshady2438 Před rokem

    awesome vid

  • @OnTheRunMeida
    @OnTheRunMeida Před rokem

    Charge your phone !

  • @FACTSI1I
    @FACTSI1I Před 8 měsíci

    Eonon sound processor is horrible. If your about sound quality bypass this brand

  • @MauricioNavarroMiranda

    thanks for your video! Question for you: is it "real" carplay / android auto? i've seen a few videos and they seem to use some random apps to sync with the phone -- sounds risky to me.

    • @ColtonRichter
      @ColtonRichter  Před rokem +1

      It's a random app, but i've been using another headunit with it and there's nothing risky about it.

    • @adinageorgeta844
      @adinageorgeta844 Před rokem

      Can you say what head unit please?

  • @leanperc30s
    @leanperc30s Před rokem

    gave it a like just because i saw you listened to nav

  • @user-ln7jf7nx6t
    @user-ln7jf7nx6t Před 11 měsíci

    Hey need help! So I have one all plugged up it powers on and works like it plays sound through the speakers but I have the medium connector unhooked it didn’t come with a plug that it fit into is that going to mess anything up?