This is a great APC that im gonna get as i never get the right one amd even with this dilution the foam abilities is great which i rarely see in other APC products amd foaming is a mist for me. Great job guys and great videos.
@@henke103 I use auto finesse citrus power a few minutes before snow foam then rinse them off together,a huge difference than just snow foam,and if your car is coated properly you can get away with a touchless car wash in-between a proper wash.
We launched a new formula of our FOAM which is a proper prewash. A 1:5 - 1:1 solution of the new APC depending the amount of dirt will work fine but I would stick to the new FOAM. Regards, Y.
@GYEON Hi i saw in your video that u are brushing the those electronic button on the passenger seat/steering and buff of with a towel. worrying APC will slip into those button and spoil it?will they?
It won’t. First of all we use very little product and it is mostly foam, not a liquid that will easily go through. That’s also on of the reasons of not staying directly onto the buttons. However, in practice, unless you soak them badly, nothing wrong will happen. BR, Jeremy
Hi Yves, What would u recommend as sometimes our car might get some birds dropping, dirt, bug etc. Not heavy but just mild during road trip/normal drive. I planning to have a 1.small bottle of Gyeon APC(1:10)or bug grime 2.MF towel Steps:spray with apc>dwell few minutes>rinse>dry with MF towel As a solution to immediate clean them. Is it a good idea? Any suggestion is welcome 😁 FYI my car had been apply with Gyeon wax + ceramic detailer. Thanks
Hi Edmund, Bird droppings are a pain and need to be tackled asap. When you have direct access to a pressure washer, the best thing is to try to remove them as touchless as possible but that’s not always possible. So here is what I do: I have a small bottle with water and some Bath shampoo inside and another bottle with QuickDetailer. Depends always what the bird ate but in most cases I soak the “drop” with a lot of QuickDetailer and use one way wipes to remove. This way I have great lubrification and when QuickDetailer residue stays on the panel it’s no problem to wipe that off left over later, even on hot panels. This is not always the case with more aggressive products like APC etc. Hope this helps. Regards, Y.
@@GYEON_official thanks for the info. Ya I worry APC will be to aggressive to my waxed car too. I have ceramic detailer,it should work as well right? Should I soak the dropping with (bathe+water) first or both (detailer & bathe+water mixture)
Both will work. I like to have as much lubrification as possible. The main raison for the Quick Detailer use is that leftover residue will not harm or etch. Regards, Y.
Can this be used on piano black surface and infotainment scree. I have applied Preserve coating on interior surface, will this product remove the protection ?
Yes it will remove the Preserve. I would not use this on infotainment screens. For interior purposes make sure you dilute it 1:10 or 1:15 for the lighter work. Regards, Y.
Does it need to? Q²M APC is a strong cleaner and needs to be diluted 1:5 tot 1:15. When you agitate, it will foam but more importantly it cleans very well. Foam does not measure neither does it equal cleaning power. Regards, Y.
This is a great APC that im gonna get as i never get the right one amd even with this dilution the foam abilities is great which i rarely see in other APC products amd foaming is a mist for me. Great job guys and great videos.
Thanks for the feedback. We appreciate that!
Regards,
Y.
Can you use the apc as a pre wash before snow foam?if so at what dilution ratio? Thankyou
Pre wash for the pre wash? Wonder if we could use something before the apc. Pre wash for the pre wash for the pre wash would be nice.
@@henke103 I use auto finesse citrus power a few minutes before snow foam then rinse them off together,a huge difference than just snow foam,and if your car is coated properly you can get away with a touchless car wash in-between a proper wash.
We launched a new formula of our FOAM which is a proper prewash. A 1:5 - 1:1 solution of the new APC depending the amount of dirt will work fine but I would stick to the new FOAM.
Regards,
Y.
@@GYEON_official 👌
Nice product I used it in engine bay.
Can I use it to clean headliner?
Yes you can or Q²M FabricCleaner.
When are the new products going to be available in the US
Please check your country distributor as this can vary from country to country.
Regards,
Y.
@GYEON Hi i saw in your video that u are brushing the those electronic button on the passenger seat/steering and buff of with a towel. worrying APC will slip into those button and spoil it?will they?
It won’t.
First of all we use very little product and it is mostly foam, not a liquid that will easily go through. That’s also on of the reasons of not staying directly onto the buttons.
However, in practice, unless you soak them badly, nothing wrong will happen.
BR, Jeremy
@@GYEON_official thanks Jeremy👍. I will spray on other parts agitate with brush move on to the panel then quickly buff off.
Hi Yves,
What would u recommend as sometimes our car might get some birds dropping, dirt, bug etc. Not heavy but just mild during road trip/normal drive.
I planning to have a
1.small bottle of Gyeon APC(1:10)or bug grime
2.MF towel
Steps:spray with apc>dwell few minutes>rinse>dry with MF towel
As a solution to immediate clean them. Is it a good idea? Any suggestion is welcome 😁
FYI my car had been apply with Gyeon wax + ceramic detailer.
Thanks
Hi @GYEON any help on above question? Thanks
Hi Edmund,
Bird droppings are a pain and need to be tackled asap.
When you have direct access to a pressure washer, the best thing is to try to remove them as touchless as possible but that’s not always possible.
So here is what I do: I have a small bottle with water and some Bath shampoo inside and another bottle with QuickDetailer.
Depends always what the bird ate but in most cases I soak the “drop” with a lot of QuickDetailer and use one way wipes to remove. This way I have great lubrification and when QuickDetailer residue stays on the panel it’s no problem to wipe that off left over later, even on hot panels. This is not always the case with more aggressive products like APC etc.
Hope this helps.
Regards,
Y.
@@GYEON_official thanks for the info.
Ya I worry APC will be to aggressive to my waxed car too. I have ceramic detailer,it should work as well right?
Should I soak the dropping with (bathe+water) first or both (detailer & bathe+water mixture)
Both will work. I like to have as much lubrification as possible. The main raison for the Quick Detailer use is that leftover residue will not harm or etch.
Regards,
Y.
@@GYEON_official thanks again for the reply. Really appreciated. Will prepare as suggestion and place in my car 👍
What dilution would you recommend for carpets and upholstery?
For carpets and upholstery we have the ready to use Q2M FabricCleaner.
Regards,
Y.
Can this be used on piano black surface and infotainment scree. I have applied Preserve coating on interior surface, will this product remove the protection ?
Yes it will remove the Preserve. I would not use this on infotainment screens. For interior purposes make sure you dilute it 1:10 or 1:15 for the lighter work.
Regards,
Y.
@@GYEON_official sure Thanks
Buenas tardes, para diluir es con agua o agua destilada,
Both will work.
T.
@@GYEON_official perfecto muchas
is it good to clean the tyres in a diluation 1:5 ?
Yes but we have a dedicated tire cleaner that js ready to use and works great!
Regards,
Y.
Is it safe for coated cars?
Yes but it’s a product that needs to be diluted. From 1:5 to 1:15 depending the task.
Regards,
Y.
does it foam well?
Does it need to? Q²M APC is a strong cleaner and needs to be diluted 1:5 tot 1:15.
When you agitate, it will foam but more importantly it cleans very well. Foam does not measure neither does it equal cleaning power.
Regards,
Y.
@@GYEON_official yeah , just personal preference ,once it foams u can see whats left for u to do , i know foam does not mean strenght
Is this apc ph neutral ??
Concentrated - no. Diluted - might be, depends on the dilution you use. No ph-neutral APC work really well though.
BR, Jeremy.
I think APC is too strong for interior and needs to dilute, I'll rather use Gyeon Interior Detailer instead.
Q²M APC is not a ready to use product and must be diluted. For interior use we would recommend 15:1 dilution.