GE Profile 4.8 cu. ft. Smart UltraFast Electric Washer & Dryer Combo maintenance M# PFQ97HSPV0DS

M# PFQ97HSPV0DS
GE Profile 4.8 cu. ft. Smart UltraFast Electric Washer & Dryer Combo in Carbon Graphite with Ventless Heat Pump Technology
Finding out what is in the drain pump and how to maintain the unit and keeping it clean.
Bruno's Appliance Repair (941-585-8380) www.callbrunos.com/
Raising The B.A.R. - Biblical integrity, Accountability & Respect
WE OFFER OUR SERVICES IN SOUTHWEST FLORIDA
Port Charlotte, Punta Gorda, North Port, Venice, Arcadia, Sarasota, Bradenton | Cleveland FL, Englewood FL, Fort Ogden FL, Lake Suzy FL, Manasota Key FL, Nokomis FL, Placida FL, Rotonda West FL, South Venice FL, Siesta Key FL
www.callbrunos...
Our Ebay Store www.ebay.com/u...

[@jamesshelleywijnhamer19]

Thank you for the video. I started to get the 353-fault code. Called GE and they had to send out a GE certified technician. They had to replace a part. It took the technician about 4-5 hours. The technician ran the machine to get it to reset. After it finished, I got the fault code 354. We ran a small load of laundry and now will not go into drying mode and giving the error code 353. I cleared the fault code and tried to run another small load. Again, stopped after the washing of the clothes. Would not go to drying and fault code 354. Now we have a really expensive washing machine.

[@Ozzie4Para]

It never ceases to amaze me at how nasty people let these machines get before they give them the attention that they need. These machines are great but they do require more care than a regular washer and dryer. I clean my lint filter after every load and everything inside that area including the coil still looks brand new.

[@maf11300]

The maintenance is not a lot more than separates. I had to clean my dryer filter after every load, not to mention the dryer vent system once or twice a year.
Just cleaning the filter after every load and the pump drain once a month this unit will stay clean.

[@HomeGuySolutions]

​@@maf11300 Not with this machine. It is recommended to clean the filter after the notification or once a week or every 2 weeks depending on usage. This is not a standard dryer. We have done extensive testing on the airflow with a clean filter and one after 12 loads. The airflow was the same, the amps sis not increase on the blower and the clothes were dry.
It is extremely important to clean the filter tracks, upper, lower and rear EVERY time you pull out the filter. Lint / Debree will drop off the filter and fall onto the rails. If you do not vacuum the rails each time, you will push the lint to the rear and ultimately onto the Coil / Condenser. Out kits stop 99% of lint from getting by the filter. We also have a proven Flush Method without taking the machine apart. It will clear most if not ALL lint buildup on the first flush.
CZcams: Home Guy Customer Service
HomeGuySolutions.com for products.
We are also available by phone.
John
HGS

[@RedErin]

The wet vac is genius! I stupidly didn’t get a pedestal and have to put a plate under the filter door with a folded microfiber I wring out a couple times to deal with the water that comes out. It’s fine to do 4 times a year or so but I’ll switch to the wet vac that looks easier.

[@vintageglitter2469]

I clean the lint out every wash. Mine has never looked like that. My machine will be a year old in September.