Making Shoji Sliding Doors
Vložit
- čas přidán 4. 07. 2024
- A custom order of two Japanese shoji sliding doors made out of European Oak.
Dimensions: ~2000x800 mm each door
Simple Kumiko design, a small hip board on the bottom, sliding on rollers.
The transom, with the upper track, didn't filmed its build, use to cover an A/C unit behind.
Finish Rubio Monocoat Oil color Pure. Kumiko grid natural, no finish.
■ Some tools used in the video:
Suizan 6” Dozuki Saw www.adrianpreda.com/shop
Suizan 5” Double Side Flush Saw www.adrianpreda.com/shop
Chamfer plane - bit.ly/2w9K87X (Dictum)
Shinwa Ruler 300mm - amzn.to/48wOLWLl (Amazon), bit.ly/2OLC1ou (Dictum)
Shinwa Mini Try Squares - amzn.to/47G8GBG (Amazon), bit.ly/39sQFJm (Dictum)
Pfeil Marking Knife - bit.ly/39jGrLc (Dictum)
Bar Clamps - bit.ly/2vtVfIg (Dictum)
Shoji Paper - bit.ly/3XotetT (Dictum)
■ List of all my tools: www.adrianpreda.com/blog/tools
■ Tools list on Amazon www.amazon.com/shop/adrianpreda
■ Plans and Products I make on my store here www.adrianpreda.com/shop
■ Follow my INSTAGRAM for insights and other projects:
/ adrianpwood
As an Amazon and Dictum Associate, I earn from qualifying purchases made through these links.
-------------------------------------------------------------------
Music CZcams Audio Library
0:00 Intro
0:22 Joinery
3:48 Hipboard and Rollers
5:35 Finish and Assembly
7:02 Kumiko Grid
9:35 Rollers and Track
10:36 Paper and Handles
12:10 Final Installation - Jak na to + styl
Long time no see! I was planning to make a hand tools video as my comeback but no luck with time, instead I was able to film this client project I worked last month, power tools mostly. Hope you'll enjoy it!
Great to have you back! Your videos have been greatly missed.
I second Roland, thanks for sharing!
Good to see you back, I was wondering where you had gone and hoped you would return at some point. Looking forward to seeing some more of what you've been up to...
This is absolutely beautiful and such a pleasure to watch. As many commented, I love watching hand tools videos but I’d rather have power tools videos than no video at all. You’re an artist and you have been missed!
Thank you for these wonderful videos you share with us.
Beautiful result as always. I think I will always prefer your hand tool videos, but I'll gladly take power tool videos over no videos at all! Welcome back to youtube, you have been missed :)
Thanks! Yes, it was a hard decision for me if to film this or not, but it was over 15 months since I haven't published anything so I had to do something to bring the video making mojo back
Good to have you back Adrian...
Yes! Welcome back Adrian. Your videos are always informative and enjoyable. Another lovely piece of work. Hoping for more hand tool videos to come? There are far too few quality videos of this nature, so don't stay away so long! 😉
Worth the wait , Beautiful work 🥂
Worth the wait! More please!
Hi Adrian! So glad to see another video from you. You have such a knack for visual storytelling - no words needed. So beautiful to watch the story for your client unfold. I'm sure they're very happy!
Thank you so much!
Absolutely beautiful!!!
nice job!!!
Adrian, thank you so much for sharing again your talent, skill and artistry with the world. I watch your videos many times and keep learning new things. I hope you will continue in your good work and offer best wishes from Arizona, USA. 🙏
I love watching the perfect fitting mortises and stuff. Great video!
Thank you! Cheers!
Love it! So want to do this myself. Well done! Your videos are always inspiring!
Welcome Back! Excellent video. Please keep making them.
Thanks, will do!
Beautiful work Adrian & nice to see you posting again! Happy New Year! 👍👍
Happy new year! Thanks!
Beautiful project. It's nice to see a new video from you!
Thank you! 😊
Magnifique! Quel beau travail ! Félicitation !!!
Holy Wow!
Beautiful !
It’s a long time no see you Adrian . I am very happy that you come back. You are inspired me to do woodworking. I watched your all of videos in CZcams and rewatched many times. I learned a lot of things. So beautiful Shoji lamp and Kumiko !!! At first I think you will stop doing your work. It’s very sad . But thanks for coming back brother. Hope you will upload a new project. 🙏🙏
Excellent work Adrian.
Many thanks!
Beautiful.
Really beautiful work, Adrian! Amazing looking doors! 😃
It's great to see another video from you! Welcome back!
Stay safe there with your family! 🖖😊
Thank you very much!
Just wow..
Beautiful as always Adrian ;)
Really lovely work. Thanks for sharing!
Many thanks!
There so beautiful and simple elegant design.
beautiful video and work!
Mă-ntrebam unde-ai dispărut! Bine-ai revenit! Foarte faină lucrare! Mai vrem!
Multumesc!
Yee Haw! The return of AP! Very keen to see your take on screen making.... lean design is easy on the eye. Cheers Jerry in Everett Ontario
Thanks 👍
Damn that's beautiful!!
Beautiful work sir. I'm inspired to make some.
Nice work - as always.
Thank you! Cheers!
missed your content. hope to see you more regularly. thanks for your work.
Thanks!
Ben tornato.... finalmente....sei sempre molto molto bravo
I've missed these pleasant videos! My friends often ask me about you when they mention the gifts I've given them.
Thank you Melinda, sorry for the long wait! Glad to hear they enjoy them!
I normally don't comment, but I want you to know you have inspired me to do more work by hand. I'm so happy to see another video from you. Thanks
I'm so glad! Thank you!
Beautiful work. And welcome back; you were missed.
Thank you very much!
amazing work
Hey Adrian! Nice to see you back! We'd like to see an update about your workshop when you have time! Cheers!
Thanks! Will do probably this summer!
These would be perfect for my built in wardrobe.
Awesome project.
I did one for this client😀 Haven’t yet made any pics but when I will return I will, you can check them on my Instagram page
@@AdrianPreda - What did it cost your client? Would it be feasible for you to do send them unassembled to Denmark?
Very nice.
Yeeeeeeees finally you are back =) i was missing a lot your inspiration videos, argentinean hugs from Belgium!!
Thank you!
I’m glad you were finally able to publish your vid. I can tell you missed doing them. Top!
Thank you kind lady😀
Glad to see you back. You've been missed.
Thank you!
Foarte frumos, si clipul si lucrarea! Felicitari!
Multumesc!
Great video Adrian. You seem to have acquired a lot more power tools. The door looks great.
Thanks Nik!
WOW!!!
foarte frumos...terapeutic
Tudo incrível e Lindo.
Very nice! 🙂👍
Thank you 👍
Espectacular trabajó maestro, tiene un toque japonés, el resultado final es magnífico, gracias por compartir sus conocimientos y experiencias, un saludo cordial y por supuesto un gran like desde Narón (Galicia)👌🤓😜
Gracias!
Welcome back,
You're a sight for sore eyes! ^^
They say (sometimes it's not the destination ... it's the journey ) , but in this video i enjoyed both the journey and the destination ... 👍
Thank you!
Top shelf craftsmanship….Beautiful in it’s simplicity…..Great Vid!!! [and, surely not for a family with young kids! 😁]
Indeed, or cats😀 Thanks!
@@AdrianPreda Or dogs larger than tribbles.
well done,
It's always a pleasure to watch you work Adrian. Is the kumiko lattice work typically only applied to one side of a shoji door? At 12:21 it looks like there are 2 sets of doors spanning a gap. Is this typically how you would get the lattice work to show regardless of what side of the door you are on? Or would you ever consider applying the kumiko on both sides of the paper so that you would only need a single set of doors?
Ciao e bentornato!! Ottimo lavoro... raffinato come sempre( del resto)!!
Grazie!
Grazie!
Very clean looking. Where to buy those bottom rollers?
Absolutamente linda..❤
Nice too see you
Dear, I haven't seen you for a long time,👍.
Instant like
Thanks!
Hi Adrian.
My fall project is to build 2 Shoji sliding doors and your video is very helpful. I checked the list of tools and product but I can’t find the rollers (time 9.35). Can you direct me to your supplier?
Thanks for the video. Beautiful work.
Andre
Awesome video! It's cool to see your power tool setup as well. What type of glue did you use to adhere the paper? And what was the purpose of spraying it with water afterward?
Thanks! That's a special glue for shoji, though is not so special, just made from rice, you can diy too but is not that expensive to buy. It is easy to remove or replace the paper afterwards, just moist with water with a brush and it will peal easily.
Spraying is used to remove dents in the paper. Water will soften the paper but once it is dried it will take the form of the frame so it will be tight and flat like a drum head almost
I love this Shoji style. The end result looked fantastic in the room and it reminded me of my final project as carpentry apprentice which is a bigger Shoji Lamp/Side Table Hybrid. It was so much work and stress but absolutely worth it imo. It makes me appreciate the work you put into this a lot. The little tricks and tools you use to make the bridle joints are very nice.
Edit: Are you, by any chance, from Romania?
Thanks! Yes, from Romania.
@@AdrianPreda Nice! Im from Germany living in Bucharest to study. If you make any exhibitions or something similar I'd be happy to come by and see your work.
Doamne ajuta și sănătate.
What finish do use on the frames before applying the paper? Thanks
Very nice and beautiful video Adrian" One question: where did you buy the rollers. Thank you.
Thank you! From Germany (rollers are Japanese though), look for Shoji Bau
well done. I was hoping to see the doors open and close at the end though ;)
Thanks! I know, I was in doubt to postpone this vid so when I return there to make better pics. It was late when I installed them, barely no light for pics and videos. The final pictures are heavily edited so I can show the final project😀
Lovely work, as always. May I ask, where did you source the rollers from?
Thanks! Look for Shoji Bau germany
Самый аккуратный мастер 👍👍👍🇹🇷
Thank you!
Faină treaba Adrian! Felicitări. Am observat un cnc în filmare, pare ceva de care as fi și eu interesat (ieftin și bun) mi-ai putea da niște detalii despre el?
Mersi! E un Shapeoko 2 vechi, nu se mai face. Nu stiu ce se mai gaseste acum la aceeasi bani si specs, nu m am mai documentat deloc
Hey, neat job! I made some sliding shoji panels myself but I made some mistakes and they are not sliding neatly so I will need some kind of rollers myself. Did you find yours locally?
Thanks! No, i germany, look for Shoji bau
Meserie 👍😎
hi adrian how are you ? i'm starting to study by myself wood working and i love your channel what can buy as a starter kit for begginers like me ?
i live in a apartment so i can't use machinery btw
Subarashiiii sesuai ne
Nice video 👍 Btw, is that Record Power BM16 morticer ? How do you like it so far, worth the money?
Thanks! Yes, that one! Very well made, works great. I haven't yet invested in quality chisels, those here are the crapy chinese ones that came with the machine, but they did their job for 2-3 projects I made so far.
The only con are the depths screws with the levers, are worse, they brake. But that's not a big deal, can be diy something better
@@AdrianPreda great, tnx a lot fot the answer and keep up the good work! Looking forward to new videos!
Frumos!
De unde ai luat masina de slefuit cu valt?
Mersi! De la igm tools cehia
Finally!!!. Frumos rezultat. Îți amenajezi casa in stil japonez, sau e un client?
Mersi! Client :) Voiam pt mine sa fac doua pt ferestre, si sa le fac clip, mai traditional, scule de mana dar n-am apucat asa ca le am postat pe astea
@@AdrianPreda Se cunoaște ca îți place și lucrezi din suflet. Doar așa poți face ceea ce faci tu. Cum de nu mai ești așa activ pe CZcams?
Mersi! In ultimul an nu prea am avut timp de filmat, a venit un bebe si ceva treaba cu comenzi
Is European Oak just White Oak?
No, quercus robur vs quercus alba, two different oaks.
✌🏼👍🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼
Its been too long man! Welcome, cause I was tired of watching stupid woodworking projects.
It kills me that you didn't open and close the doors at the end...
Couldn’t film that, it was so dark for the camera. I barely made and heavy edited the final pictures
@@AdrianPreda :) Beautiful work regardless.
salut, de unde tiai cumparat masina de facut mortise and tenon ? f fain videoul!
Mersi! Din Austria, nu mai stiu numele, ceva lung, am cautat cu translate in toate limbile in Eu pana am gasit o aici. A fost cam scumpa 450 + 150 transport dar aveam nevoie de ea. De altfel exact pe asta am vazut o si pe shop expert la noi