Thats brilliant. Yours is the best sieve on YT. I already bought some similar planks and mesh today, but you had the recipe to make it all work. Many thanks Jeff.
I like your concept, i figured I could make the bottom sieve long enough so I could get another wheel barrel underneath to catch the compost. Thank you for sharing,
Thanks Rusty. I've had someone mention that and it makes sense if your goal is to catch the soil for sure. I was focused on cleaning the rock but in any case a wider frame would definitely allow you to catch soil as you want. Good luck!
I made this for $12 and some old lumber and it works great. I can move the sifter with one hand its so easy. I love that the wheel guides are on the inner side because it keeps more dirt out of the wheel path. This is a BIG improvement over the ones with boards on the outside of the sifter box. Highly recommend. Thanks!!
This is exactly what I was looking for. I need to clean white rocks in my backyard. They've been overcome with weeds. I'm going to start this project tomorrow. Thanks Jeff!!!
Thank you for making your video. Browsed several videos on making a rock/dirt sifter and will take one idea from all that I've seen to apply to yours. your landscaping project is exactly what I'm doing. Was getting in good shape by lifting the basket full of rocks and dirt and shaking it out. But it eventually wore me out. Will be making this today Again thanks
Love it Jeff! Looked at many ideas and your's seemed to be the best. I'm buying the casters this morning and will use old lumber I have to make the rest. Thanks for the great video!!
Great setup! I have some river rock completely mixed with dirt that I want to use in landscaping and I had to use my hand and small shovel to rub it through sieve. This will be so much easier!
Hi Jeff, I made my first sifter according to your instructions. I only made a few addition for example . Added 4 26 inch legs. reinforced a little more then your piece. Point however is thank you for showing your construction .It made it very easy for me to make one as well. Very much appreciated !! I know its not like your building the Empire State Building ,but it does give you some confidence by the time your finished. !!!!!!!!!! Thank you again!
just wanted you to know, I built this in about an hour and a half today and it works like a charm, the only change I would make is make the carriage longer so I could fit a wheel barrow under the sifter (between the sawhorses) for the falling dirt. As it is I put my flat dolly and a garbage can under it so I do collect most of the dirt for transport somewhere else. Thanks!
From one Jeff to another: I thought to make something like this (maybe minus the wheels) to do the exact same thing, so this is a very useful video...concise & to the point as well ! Thx :)
Jeff, Best sifter design I have seen so far. I'm going to use your design to build myself one since your video demonstrates it works great and easy to build and $cheap$. Thanks!
You raise a good point and I tried a non rolling angled version prior to this model which worked great for really dry dirt with no clods but when the soil was a little moist, many of the dirt clods remained with the rocks. When I added the rollers, I found the back and forth movement broke up most of the clods and kept the rocks cleaner. I agree, it does mean a little more work but I felt it was worth the end result. Thanks for the comment.
AWESOME!!! I have found using a hose and colander works really well-our silt just blows away when dry. This is perfect to just rinsing it all on through and giving her a shake-thanks!
I really love this idea. I'm cleaning out all of the rock that is in my backyard, as the majority of it has sunk under the soil due to water erosion. I'll be going to Home Depot to pick up what I need to make one of these for my home. It will also be good for seiving mulch. I'm not sure if you thought of it, but you could put another wheelbarrow/cart under the sieve to carry away the clean soil.
Brilliant! And as I watched you shake the sifter it occurred to me that I can put some dry cow dung in with the rocks to help crumble them up. I spend way too much time hand-crumbling them and it's always a chore even when I soak it over night. I'll have to experiment with that. Also, I'll be thinking of an easy and practical way to change the sizes of the screens to try my luck at separating worms from vermicompost. Thanks for sharing!
I had to dig a 40 foot trench to lay some 4 inch drainage pipe. The soil is so rocky it's brutal. After picking out the rocks the size of grapefruits, I'm left with a bunch of rocks about golf ball size. I'd like to get them out to use the dirst to help fill back in the tench. This video helps a lot. Guess I'll be hitting the hardware store.
Hey Jeff, not trying to take your idea away ,but i had the same thing in mind....the only difference would have been making a track so that the wheels stay in place and instead of stapling the mesh I would have nailed a strip of wood on each side to keep the mesh in place. i am glad i saw your video. Did not like all the other suggestions.....i. e. using a rep. saw or some kind of frankenstein concoction. Thanks !!!!
mundl kalli, thanks for the comment. The firing strips definitely keep the wheels in place (side to side) so it stays in place very well. I thought about the side mesh pieces and have seen others use metal strips as well but I found it really was not needed. Thanks again and good luck!!
I have a sieve about that size that I was using by hand, literally shacking it bent over, very back breaking, I built a large one that is slopped, it works a lot better but still a lot of work, I might customise my original smaller one like this and see it it works for me, I mainly sieve compost.
Hey RJC, I started out doing the manual shake. It really should be called the "Shake & Back Break". Hope this helps you out. The better you align the furring strips underneath, the better it will keep the wheel tracks clean from the compost. Thanks!
Hi Looks like a good idea Have a load to do .Was going to build a cement mixer version but expensive and time consuming and a one off use. This looks just the job Thanks
I think you nailed it. If you did this day after day as part of your job etc, the power rolling type might be a good option but for individual projects this has been the perfect option. Thanks!
Hi and thanks for the comment. The firing strips keep the wheels tracking so the sieve cannot fall out of the tracks and if installed at the right height it will help keep dirt from getting on the tracks also.
That's a great design but I just have one question and like a quarter of a million the other viewers in this world would like to know. What is your dimensions on the top box with the gauge wire for the unit
Hi!! The top box is a simple 2x3 foot box that I made with old 2x6 lumber. I used 1/2" wire screen found in the fencing section of Home Depot, but you can also use 1/4" screen if your dealing with smaller rock sizes. The wire screen comes in a roll that is 2x5 feet so it works out well. Not sure of the actual gauge of wire used, but there is only one choice in Home depot so should be easy to find. Thanks for the comment and question!!
Hi, I used spare wood I had so the box with the screen is made of 2x6. The base is made of 2x6 on bottom and 2x4 where the wheels roll and 1x3 fir strips as wheel guides. I believe this could also be made with just 2x4's and fir strips but the box would just be a bit shallower. Thanks for asking.
Mine is 45"' but another post suggested making is a little longer if you desire to put a wheelbarrow under the sieve to catch the dirt. I was more focused on getting clean rock. Hope this helps and thanks for the question!!
@@jeffkusman2179 thank you for replying Jeff. Out of all the sifters I've seen this is the one I want a copy. I have a huge Rock garden that needs to be cleaned out. After 20 years too much debris has fallen in between the cracks creating compost and weeds. The only reason it lasted twenty years was because when I first did it I put plastic down as a barrier. Thanks again
You bet Russell. This will be perfect. I had 1 1/2'" rock so the 1/2" screen was great but if someone has smaller sized rock Home Depot sells a smaller screen also!!
www.homedepot.com/p/Everbilt-2-in-Soft-Rubber-Rigid-Caster-with-90-lbs-Load-Rating-49481/203661068 I think these are the current wheels at HD. The price was less when I made the unit originally.
@@jeffkusman2179 Thank you so much. I am going to build it a little lighter. I am 69 years old and need to be able to use it once I make it. Thanks again.
I am designing a lower to the ground one. Keeping the higher end only 2.5' from ground level,, tobsave on having to lift each shovel load up so high, because that's the part that Kills me aching, the repetitive lifting part, I am carrying too much belly blubber, my poor back. Thx for the info and inspiration.
Wow, so sorry you feel so put out by my simple homemade item. I hope your day gets better. Maybe you could paste a link to one of the cheap quality units you are referring to so others can benefit. I have not come across any that have the size, rolling or ease I've experienced using this. Thanks again.
Nice job Jeff! Simple easy efficient and inexpensive! I like it!
Thats brilliant. Yours is the best sieve on YT. I already bought some similar planks and mesh today, but you had the recipe to make it all work. Many thanks Jeff.
I like your concept, i figured I could make the bottom sieve long enough so I could get another wheel barrel underneath to catch the compost. Thank you for sharing,
Thanks Rusty. I've had someone mention that and it makes sense if your goal is to catch the soil for sure. I was focused on cleaning the rock but in any case a wider frame would definitely allow you to catch soil as you want. Good luck!
I made this for $12 and some old lumber and it works great. I can move the sifter with one hand its so easy. I love that the wheel guides are on the inner side because it keeps more dirt out of the wheel path. This is a BIG improvement over the ones with boards on the outside of the sifter box. Highly recommend. Thanks!!
You can buy one brand new for less than that...... you had some old metal mesh lying around.........what a dump
This is exactly what I was looking for. I need to clean white rocks in my backyard. They've been overcome with weeds. I'm going to start this project tomorrow. Thanks Jeff!!!
Thank you for making your video. Browsed several videos on making a rock/dirt sifter and will take one idea from all that I've seen to apply to yours. your landscaping project is exactly what I'm doing. Was getting in good shape by lifting the basket full of rocks and dirt and shaking it out. But it eventually wore me out. Will be making this today
Again thanks
Love it Jeff! Looked at many ideas and your's seemed to be the best. I'm buying the casters this morning and will use old lumber I have to make the rest. Thanks for the great video!!
Great setup! I have some river rock completely mixed with dirt that I want to use in landscaping and I had to use my hand and small shovel to rub it through sieve. This will be so much easier!
Hi Jeff, I made my first sifter according to your instructions. I only made a few addition for example . Added 4 26 inch legs. reinforced a little more then your piece. Point however is thank you for showing your construction .It made it very easy for me to make one as well. Very much appreciated !! I know its not like your building the Empire State Building ,but it does give you some confidence by the time your finished. !!!!!!!!!! Thank you again!
just wanted you to know, I built this in about an hour and a half today and it works like a charm, the only change I would make is make the carriage longer so I could fit a wheel barrow under the sifter (between the sawhorses) for the falling dirt. As it is I put my flat dolly and a garbage can under it so I do collect most of the dirt for transport somewhere else. Thanks!
Awesome. You forged the path sir.
I love the wheels on this one. It's the first one I've seen done like this. I really like it.
Jeff! Thanks very much. I needed something like this and your approach worked great. Wish I could show pictures of how much I was able to get done.
Thank you Jeff, you just made my day, for tomorrows work. Great video
From one Jeff to another: I thought to make something like this (maybe minus the wheels) to do the exact same thing, so this is a very useful video...concise & to the point as well ! Thx :)
WOW great build. I will be making one of these but I will put the frame straight on the wheelbarrow. Thank you so much for this . God bless
Jeff, Best sifter design I have seen so far. I'm going to use your design to build myself one since your video demonstrates it works great and easy to build and $cheap$. Thanks!
better to tilt the box so gravity does most the work for you. No emptying the box which gets heavy fast if your sifting rocks.
You raise a good point and I tried a non rolling angled version prior to this model which worked great for really dry dirt with no clods but when the soil was a little moist, many of the dirt clods remained with the rocks. When I added the rollers, I found the back and forth movement broke up most of the clods and kept the rocks cleaner. I agree, it does mean a little more work but I felt it was worth the end result. Thanks for the comment.
I hear you. It rained last night here so I may be in for a long day.
Excellent! Thank you, I happen to have all those parts in the garage collecting dust.
AWESOME!!! I have found using a hose and colander works really well-our silt just blows away when dry. This is perfect to just rinsing it all on through and giving her a shake-thanks!
I really love this idea. I'm cleaning out all of the rock that is in my backyard, as the majority of it has sunk under the soil due to water erosion. I'll be going to Home Depot to pick up what I need to make one of these for my home. It will also be good for seiving mulch.
I'm not sure if you thought of it, but you could put another wheelbarrow/cart under the sieve to carry away the clean soil.
This is exactly what I needed! I need to do this on my own and on the cheep, build in a hour and go!!
Brilliant! And as I watched you shake the sifter it occurred to me that I can put some dry cow dung in with the rocks to help crumble them up. I spend way too much time hand-crumbling them and it's always a chore even when I soak it over night. I'll have to experiment with that.
Also, I'll be thinking of an easy and practical way to change the sizes of the screens to try my luck at separating worms from vermicompost.
Thanks for sharing!
I built this today and it's awesome! Thank you so much!
Thanks Jarett!! I used mine this week and it still rocks after almost 5 years, even stored outside!!
Best idea I have seen so far. Minimalist and doesn't required power, except human power.
Why not tilt it so gravity does the work for you? No emptying or shaking the box.
Like it. I made one, just like yours, with quarter-inch woven stainless hardware cloth. Boy it's good!
Great idea, thank you. I picked up the casters today and I'm building this into the potting table I'm building for my girlfriend.
Excellent!! Sounds like it will work great.
Great design. Instead of wheels I rolled my screen over a large dowel or PVC pipe because I had limIted access to materials.
The point here, is you were inspired, and mad something that would work within your budget. Congratulations🎉🎉🎉
Very ingenious. Great job. Thanks for sharing.
What a great device! Wish I could make such a great item but I'm dangerous with power tools. Honestly,no joke! Thanks for sharing!
Great design and follow through. Think this will serve my need perfectly.👍🏽
Genius! I need to build this now!
Love it. Thanks. Need to make one and this is simple and will do the work. Nice@!
Brilliant idea! Will try it out 👍👍
thank you for the nice video and brillant idea , keep going good luck
That was simply simply simply simply... simple
Very clever!!
if you could have one end designed to be a slope for tipping that would be perfect
Thanx! I will build the same next week :))
I had to dig a 40 foot trench to lay some 4 inch drainage pipe. The soil is so rocky it's brutal. After picking out the rocks the size of grapefruits, I'm left with a bunch of rocks about golf ball size. I'd like to get them out to use the dirst to help fill back in the tench. This video helps a lot. Guess I'll be hitting the hardware store.
good luck and hope the project went well. sounds like a bunch of work!!
thanks for the idea im gonna make one
Personally like this design, wheel/stops and low cost.. This will be added to the arsenal
Great idea with the wheels
It's called hardware cloth. The wheel was a good idea, very good.
Thanks for the terminology and comments!
Well done 👍
Brilliant, thank you.
Awesome! Thanks!
great solution
I love it!
Nice job.
Great idea !
Perfect!
Hey Jeff, not trying to take your idea away ,but i had the same thing in mind....the only difference would have been making a track so that the wheels stay in place and instead of stapling the mesh I would have nailed a strip of wood on each side to keep the mesh in place. i am glad i saw your video. Did not like all the other suggestions.....i. e. using a rep. saw or some kind of frankenstein concoction. Thanks !!!!
mundl kalli, thanks for the comment. The firing strips definitely keep the wheels in place (side to side) so it stays in place very well. I thought about the side mesh pieces and have seen others use metal strips as well but I found it really was not needed. Thanks again and good luck!!
Any way you can list the measurements for everything? I’m not too savvy with these man things but I really need to sift my gravel
Brilliant!!!
I have a sieve about that size that I was using by hand, literally shacking it bent over, very back breaking, I built a large one that is slopped, it works a lot better but still a lot of work, I might customise my original smaller one like this and see it it works for me, I mainly sieve compost.
Hey RJC, I started out doing the manual shake. It really should be called the "Shake & Back Break". Hope this helps you out. The better you align the furring strips underneath, the better it will keep the wheel tracks clean from the compost. Thanks!
What is it about freshly sieved organic material that makes me salivate.
Great Idea!
Or use a wire shelf. It's rigid so it doesn't need 2x4's. Just bend the edges up to make a box.
Hi Jay, interesting idea. What type of wire shelf are you thinking? Like something you buy at Home Depot or something you make from some type of wire?
Hi Looks like a good idea Have a load to do .Was going to build a cement mixer version but expensive and time consuming and a one off use. This looks just the job Thanks
I think you nailed it. If you did this day after day as part of your job etc, the power rolling type might be a good option but for individual projects this has been the perfect option. Thanks!
I've got saw horses; why didn't I think of that? wheels? great idea. How about some kind of a track? I suppose dirt can go inside of them.
Hi and thanks for the comment. The firing strips keep the wheels tracking so the sieve cannot fall out of the tracks and if installed at the right height it will help keep dirt from getting on the tracks also.
Genius
Nice!
Some guys are using saws all to work it back and forth
Yeah, seen those. They look like they work but I was going for low money and didn't own one at the time.
That's a great design but I just have one question and like a quarter of a million the other viewers in this world would like to know. What is your dimensions on the top box with the gauge wire for the unit
Hi!! The top box is a simple 2x3 foot box that I made with old 2x6 lumber. I used 1/2" wire screen found in the fencing section of Home Depot, but you can also use 1/4" screen if your dealing with smaller rock sizes. The wire screen comes in a roll that is 2x5 feet so it works out well. Not sure of the actual gauge of wire used, but there is only one choice in Home depot so should be easy to find. Thanks for the comment and question!!
what kind of wood did you use for the top part? I know it is 2 feet X 3 ft. but are 1 by six boards?
Hi, I used spare wood I had so the box with the screen is made of 2x6. The base is made of 2x6 on bottom and 2x4 where the wheels roll and 1x3 fir strips as wheel guides. I believe this could also be made with just 2x4's and fir strips but the box would just be a bit shallower. Thanks for asking.
@@jeffkusman2179 Thank you
Can you tell me how long the 2x4 runners are under the sifter box that the wheel sit on? Thanks
Mine is 45"' but another post suggested making is a little longer if you desire to put a wheelbarrow under the sieve to catch the dirt. I was more focused on getting clean rock. Hope this helps and thanks for the question!!
@@jeffkusman2179 thank you for replying Jeff. Out of all the sifters I've seen this is the one I want a copy. I have a huge Rock garden that needs to be cleaned out. After 20 years too much debris has fallen in between the cracks creating compost and weeds. The only reason it lasted twenty years was because when I first did it I put plastic down as a barrier. Thanks again
You bet Russell. This will be perfect. I had 1 1/2'" rock so the 1/2" screen was great but if someone has smaller sized rock Home Depot sells a smaller screen also!!
@@jeffkusman2179 my rock is also 1 1/2" It's called carnation pink. So the 1/2" mesh I know will work perfect. Thanks again
I would love to know what kind of wheels these are.
www.homedepot.com/p/Everbilt-2-in-Soft-Rubber-Rigid-Caster-with-90-lbs-Load-Rating-49481/203661068 I think these are the current wheels at HD. The price was less when I made the unit originally.
@@jeffkusman2179 Thank you so much. I am going to build it a little lighter. I am 69 years old and need to be able to use it once I make it. Thanks again.
What kind of wheels and where do you buy them please?
The wheels are at Home Depot. They have a few options but these I believe are 1.5 inch straight rollers. Best of luck and thanks for the question!
Thank you very much, Great "Contraption"😉
I am designing a lower to the ground one. Keeping the higher end only 2.5' from ground level,, tobsave on having to lift each shovel load up so high, because that's the part that Kills me aching, the repetitive lifting part, I am carrying too much belly blubber, my poor back.
Thx for the info and inspiration.
Add some stops for the wheel, otherwise great job
Need one but am 80 years old and can't make one. How much to make one for me and ship to San Mateo, California?
Hi, I'd be happy to put something together for you. Email me at j9640k@msn.com and we can work out getting you fixed up. Jeff
nice guy!
Take a breath!
I'll have to work on my core diaphragm and air control, lol!!
They cost peanuts, why bother with this cheap nasty homemade crap
Wow, so sorry you feel so put out by my simple homemade item. I hope your day gets better. Maybe you could paste a link to one of the cheap quality units you are referring to so others can benefit. I have not come across any that have the size, rolling or ease I've experienced using this. Thanks again.
Too long of a video.
Hardly! This is very informative and concise compared to so many others. If you have trouble keeping your attention then check out Study Technology.