Thanks for taking the time to make this, very helpful. I am a pro and come to CZcams all the time just to be sure. You can gently pry the packs off without the need for alcohol or dental floss. I use a flat wide steel tool very common for phone repairs. Very important not to pierce the battery, so don't use any pointed or sharp things.
Thank you for the detailed video, It helps a lot. I recommend everyone who needs to replace their battery watch this first and watch it when you are doing so!
Thank you for showing me how to replace my old model A1425 MacBook Pro's battery! It took me about two hours and I did not have any problems starting it back up.
I did it. I replaced the battery. It was pretty easy to do thanks to your video. I used WD 40 to release the adhesive on the original battery pak with a slow & steady pressure lifting on the battery. WD40 doesn't evaporate like the alcohol does but you should cover the circuit board area with a paper towel to keep the WD over-spray off of it. You can clean the WD up with paper towel and lighter fluid. In fact you could use just the lighter fluid to release the adhesive too. Your call. I took a few pictures during the disassembly to aid in reassembly but it really isn't all that hard and my Macbook is running like new. Thanks again
Thanks for your well recorded and informative video. I have the same computer and the battery has become very weak. It dies at about 30%. So replacing my Macbook's battery is high on my list of things to do. I too see no need to replace an otherwise terrific computer just cuz the battery is old and tired. Thanks again.
I want to try this but I am concerned about the final part of charging and discharging. I see many conflicting ideas on this. some you need to do it and some say its not good to do it. Also, exactly how do you do it. Thanks
Great video ! Two additional advices after replacing my own battery on this A1425 model : 1. Using dental floss might not always work as it is likely to snap. In my experience, it was easier forcing an old credit card underneath the battery's blocks to loosen them. 2. Be very careful using only a minute quantity of solvant. Using more than a few drops means risking to dip your motherboard ! Fortunately, even if you do, it evaporates pretty fast.
Hi. I replace my battery but unfortunately my Mac in not recognizing the new one. When i go in to the about this mac, system report its seams the battery is not installed.. The mac works fine. Any ideas?
When you attach the plug to the board there's a locator pin that needs to be in position. I found myself trying to screw the button headed screw in, but it wouldn't bite the thread and it was because the locator pin wasn't sitting right. He does mention it, but only very briefly. If you are still having this problem, maybe that is why?
Thanks for taking the time to make this, very helpful. I am a pro and come to CZcams all the time just to be sure. You can gently pry the packs off without the need for alcohol or dental floss. I use a flat wide steel tool very common for phone repairs. Very important not to pierce the battery, so don't use any pointed or sharp things.
That was very helpful. I've successfully replaced the batteries in my MacBook Pro. Thank you!
Thank you for the detailed video, It helps a lot. I recommend everyone who needs to replace their battery watch this first and watch it when you are doing so!
Thank you for showing me how to replace my old model A1425 MacBook Pro's battery! It took me about two hours and I did not have any problems starting it back up.
I did it. I replaced the battery. It was pretty easy to do thanks to your video. I used WD 40 to release the adhesive on the original battery pak with a slow & steady pressure lifting on the battery. WD40 doesn't evaporate like the alcohol does but you should cover the circuit board area with a paper towel to keep the WD over-spray off of it. You can clean the WD up with paper towel and lighter fluid. In fact you could use just the lighter fluid to release the adhesive too. Your call.
I took a few pictures during the disassembly to aid in reassembly but it really isn't all that hard and my Macbook is running like new. Thanks again
Great video! Used it to replace my battery that was much needed after a decade!
Great video friend. I didn’t realize that the 2012 on up retinas were much more tedious than my old 2011. Great job!
Thanks to your video, I was able to install the new battery from Puredick. Yes, that's a real brand. Anyway, thanks so much for your help!
No, Amazon spelled it wrong. It's Puerdick.
@@albarhorst366 lol cool. I didn't know that.
Have you problems with Puerdick battery? Warranty?
Thanks for your well recorded and informative video. I have the same computer and the battery has become very weak. It dies at about 30%. So replacing my Macbook's battery is high on my list of things to do. I too see no need to replace an otherwise terrific computer just cuz the battery is old and tired. Thanks again.
Just want to say thanks thanks for your well recorded video step by step video. It worked great for me! Thanks again!!!
thank you for the Video, I replaced battery for my MacBook Pro today.
Excellent video, thank you.
Plastic push-bike tyre (tire) levers are great for prising the batteries out instead of dental floss.
Thank you very much for doing this video; was able to follow it very easily.
Really helpful - thank you. I have the same MacBook and will be replacing the battery soon.
Thanks man! This video really saved me!
Thanks for the video just installed a new battery.
hey dude, thanks for the video, please post the link to the battery, I need to buy it too
Thank you! Just replaced my battery and charging it now. Hope it worked.
Thank you for the vid!!!
whether the a1437 series can be used for the a1425 series
Thanks, your video was very helpful!
I want to try this but I am concerned about the final part of charging and discharging. I see many conflicting ideas on this. some you need to do it and some say its not good to do it. Also, exactly how do you do it. Thanks
Took off the battery cover and it’s all corroded . Is there any way to fix ?
Great video ! Two additional advices after replacing my own battery on this A1425 model :
1. Using dental floss might not always work as it is likely to snap. In my experience, it was easier forcing an old credit card underneath the battery's blocks to loosen them.
2. Be very careful using only a minute quantity of solvant. Using more than a few drops means risking to dip your motherboard ! Fortunately, even if you do, it evaporates pretty fast.
Thanks.
Thank you so much! I did it with your help and it works )
my macbook pro A1425 often starts with black screen. it only opens well on some occasion but most often not. what could be the problem.
Do you have the link where you get the battery from?
very helpful
Hello, thanks for the video. Can please tell if the RAM is replaceable in this model? My laptop is stuck in the 3 beeps mode.
whats the seller for your battery?
Hello. Any suggestions 🤔...where I can get the replacement battery (good quality)?
Hey i have a problem with my headphones TT-HB22 can you help me?
Beautiful tutorial. Have only done removal so far. All the tips, timing and flow, really good man 🤌🏻
Hi. I replace my battery but unfortunately my Mac in not recognizing the new one. When i go in to the about this mac, system report its seams the battery is not installed.. The mac works fine. Any ideas?
When you attach the plug to the board there's a locator pin that needs to be in position. I found myself trying to screw the button headed screw in, but it wouldn't bite the thread and it was because the locator pin wasn't sitting right. He does mention it, but only very briefly. If you are still having this problem, maybe that is why?
Go to 14.50 in the video for the bit I am talking about.
👍🏽 thanks!
please get new rubber pads😭