Keep up the great work CoralVue! Former Neptune Apex user & SCMAS member here. Got tired of the poor build quality of the Apex & subsystems & am going Hydros for my 600 gal build - just in time! Build this at a price point where you can deliver a QUALITY product with consistent results. Reefers will complain & moan, but we care most about quality & LONG term cost of ownership - which includes maintaining the safety of our corals & fish health! Thank you for what you do for us!
Sounds like a sensational product, love that it is stand alone, love the isolation of wet side and dry side and absolutely love the second input. Can't wait to hear more!
Sounds good, I get the idea behind the proprietary reagents but your reasoning that if we cannot find a reagent then we cant test is the same issue if we cant find your reagent. At least with ReefBot you can get a different brand (one of dozens) and just change the dropdown to the different brand and you are testing. I am still going to try the Maven but might want to work on some better marketing pitches other than "I may not be able to get a reagent therefore we have to use proprietary reagents".
@geekdomo Precisely. I’d personally much prefer to pay more upfront for the unit and be able to use different reagents..(rather than the same business model as printers. ) But hopefully someone can still hack the formula and offer cheaper reagents if the do go proprietary.
@@Val_Halla777 The days of inkjet cartridges are dead. You can get an Epson Eco Tank printer that comes with 8 bottles of ink (2 sets of color). These printers can use ANY ink you want to dump in them. Depending on the ink quality its the same output. Spending $35 on a set of cartridges that last a few hundred prints vs $15 on 4 bottles of ink you put in when it gets low is a no brainer. Consumers are tired of the Gillette model and want choice. I totally understand why they want to lock in a certain quality control to the testing. What would 1000% sell me on this is if they could at least offer alternative reagents or the ability to put in a lot number of the reagent and it would adapt. They are a small company and that would probably be too much effort, however the community could.
Wish more information was given. What is the precision of this of testing? How often can it test? How exactly does it work more technically? How far can it be from the tank? Ps: great job, very excited for this. And always great job David!
WOW this is such a cool product! I didn't think it was even possible to make it so easy and user-friendly 🤯 Thank you CoralVue 🤩 So many products in a short time, congratulations for all the hard work! So excited to get my hands on this, it will pair so well with the X10 😁
i’m heading to RAP california this year for the first time in many years of this hobby. your booth will be one of my stops. i’ve never owned automation or testers
I have a small LFS and I use automation a lot....this hydros stuff is definitely peaking my interest but im so deep into the other ecosystems it feels like a major task to replace ....however I think I'll have to still attempt setting one up on a system to try it all out... I am impressed Carlos.....you been definitely scrubbing forums to learn what ppl want ....cant wait to see how it works.
I'm looking forward to seeing real-world experiences of people with the Maven! It definitely looks like an amazing tester based on your description. I will be considering it for my upcoming 50g build. Keep up the good work!
Really excited about The Maven coming up as part of the Hydros Control System. I'm slowly moving out from other brands of automated testing units. And I know that you guys will deliver something robust and reliable as the others Hydros Units for the collective. I know this was a "bird eye view" of what it's going on "cooking", backstage at Coralvue, so many questions came to mind. But I know that you guys make them yourself as well, during the developing brain storming and testing. Can't wait to hear more information about it, like controlling and adjusting dosing as needed and all the possibilities and precision that we can rely on. Today is a great day to be in this hobby, kudos for everyone at Coralvue 🤘😎🤘🍻🍻🍻🍻💪💪
Being able to use it on 2 tanks has sold me. I know you're not ready to discuss pricing but I'm not interested in how much it costs per test vs the actual unit.
Background knowledge of the 'other player's' devices...... Stand-alone operation....... All in one (core 5 elements) testing.... Small form factor...... Ease of use/maintenance..... Hopefully competitively priced and good support..... This checks all the boxes for me and will be used in tandem with my Trident. I can get past the 'proprietary reagents' as all companies can run into supply chain issues as we all should know by now.
Product sounds amazing, can't wait for the how to videos, when used in conjunction with the dosers do I have to manually adjust the amounts dosed based on the test results? Or will it adjust automatically?
Beyond excited for this release! This will be the first smart tester I buy. Some questions I have. How long does each test take? Does the length of the dosing tube lines need to be a certain length, ex. most testers require a 6ft line. You said it has one stepper motor that does not need to be calibrated!?!? Thanks! Keep up the good work
I am very excited about this new product but also let down that price and delivery date are not available. I hope it does not take nearly as long to reach the market as Kraken did from announcement to ship date. I also whist you would share a photo of the full setup including the reagents and tubes.
I apologize that the podcast did not provide all the necessary details during its initial release. The Kraken will be exhibited at the CoralVue booth in RAP Orlando. As the unit is undergoing rigorous testing, the release date is currently unknown. We will keep you posted as soon as it becomes available to the public.
What’s the display look like? He said it’s WiFi available so can the test results be seen off an app? And/or is it showing on the screen with a history ? Cost of reagents How long does it take to test all the tests from start to finish
Heck yeah! like others I am excited about this one too. you guys got some nice products coming down the line. couple questions: how close is close for the 2nd tank. we talking less than 5 feet or more than 10? how much room to the regents take up? where does the wast water go? will the regents be plentiful? are they ( regents) sold single or in groups?
@@clintwarren1187 I think “with no problem” is a bit of a leap. The cuvette in the trident gets super dirty with buildup and it seems like people complain about bad test results when recalibration isn’t completed regularly. The cuvette stays at least semi-moist between tests in the trident so it seems like that would lead to a slower build up compared to air drying the liquid out and leaving anything that could build up behind after every test. I suppose we’ll see though. Definitely interested in the maven, but I do have my concerns.
I understand the not in deep information, as this is only a teaser. But the video is just hard to watch! For a product that a lot of reefers are waiting for, you guys wasted the opportunity to make it great! This should have been a super easy video to make as we do want the product, but the format used is just hard to digest; talking about everything and nothing all at ones is just hard. You guys need a new format and/or host...or stick to what you have but keep it in the normal schedule podcast/talks, not a introductory/launch teaser.
A common issue with Hydros videos. Most of the time it’s just rambling, stalling, etc. Overall, the controller is nice but the format and host just turns a 5min video into an hour. They’re generally all painful and this one is in the running for one of the worst. Horrendous formatting and topic coverage. Something needs to change or many of us will never watch another Hydros video.
What does the Interface look like? All That is mentioned is a "APP". Is there going to be a web interface for old people like me that cant read a damn cell phone?
If its good has you's are saying and its easy reliable and not tooooo expensive then its gonna be a massive seller the reagents bit sounds well dodgy lol
Also.. with the amount of tech being used of the prism, measuring through plastic and glass layers.. so much that can go wrong that I think that’s why they are covering their ass not giving dates or price.. but then again yeah they should’ve not bothered announcing it..
I'm sorry to hear that you have been experiencing issues with your X10 alkalinity tests. To resolve this problem, please contact our support team at Support@coralvue.com. It is important to note that the X10 alkalinity test should give results similar to that of a Salifert test. Also, please be aware that ICP testing does not include alkalinity measurement as it is not an element. Therefore, the alkalinity test is performed separately outside of the ICP machine.
Guys, you jumped the gun, why do this big unveiling video when it isn't being unveiled? I know you're excited about this product, but you need to wait on an unveiling. You really have no idea on price? That's disingenuous, or else you wouldn't have bothered building something like this. This came off as just puffing of the chest, "look at what we're gonna do, at some point, no idea when, and we have no idea what the price will be..."
Slim on the info. Way too much back patting and fluff. The one guy talking over the other one was absolutely annoying as well. Slow down and stop repeating the same thing over and over or trying to jump on the other guys sentences.
Keep up the great work CoralVue! Former Neptune Apex user & SCMAS member here. Got tired of the poor build quality of the Apex & subsystems & am going Hydros for my 600 gal build - just in time!
Build this at a price point where you can deliver a QUALITY product with consistent results. Reefers will complain & moan, but we care most about quality & LONG term cost of ownership - which includes maintaining the safety of our corals & fish health!
Thank you for what you do for us!
Sounds like a sensational product, love that it is stand alone, love the isolation of wet side and dry side and absolutely love the second input. Can't wait to hear more!
hopefully you can review it!
Sounds good, I get the idea behind the proprietary reagents but your reasoning that if we cannot find a reagent then we cant test is the same issue if we cant find your reagent. At least with ReefBot you can get a different brand (one of dozens) and just change the dropdown to the different brand and you are testing. I am still going to try the Maven but might want to work on some better marketing pitches other than "I may not be able to get a reagent therefore we have to use proprietary reagents".
The ReefBot sucks. I’ve had the ReefBot lab for awhile and I do nothing but fix it. I’m getting this as soon as I can.
@geekdomo
Precisely.
I’d personally much prefer to pay more upfront for the unit and be able to use different reagents..(rather than the same business model as printers. )
But hopefully someone can still hack the formula and offer cheaper reagents if the do go proprietary.
@@Val_Halla777 The days of inkjet cartridges are dead. You can get an Epson Eco Tank printer that comes with 8 bottles of ink (2 sets of color). These printers can use ANY ink you want to dump in them. Depending on the ink quality its the same output. Spending $35 on a set of cartridges that last a few hundred prints vs $15 on 4 bottles of ink you put in when it gets low is a no brainer.
Consumers are tired of the Gillette model and want choice. I totally understand why they want to lock in a certain quality control to the testing. What would 1000% sell me on this is if they could at least offer alternative reagents or the ability to put in a lot number of the reagent and it would adapt.
They are a small company and that would probably be too much effort, however the community could.
I want it now and I love the look . Main reason I will wait for this device is I don’t have to buy two different device to have automatic tester
Wish more information was given. What is the precision of this of testing? How often can it test? How exactly does it work more technically? How far can it be from the tank?
Ps: great job, very excited for this.
And always great job David!
yes - solid questions!!
WOW this is such a cool product! I didn't think it was even possible to make it so easy and user-friendly 🤯 Thank you CoralVue 🤩 So many products in a short time, congratulations for all the hard work! So excited to get my hands on this, it will pair so well with the X10 😁
i’m heading to RAP california this year for the first time in many years of this hobby. your booth will be one of my stops. i’ve never owned automation or testers
Stop by the CoralVue booth at this year's RAP Cali. We would be happy to show you around the HYDROS universe.
I have a small LFS and I use automation a lot....this hydros stuff is definitely peaking my interest but im so deep into the other ecosystems it feels like a major task to replace ....however I think I'll have to still attempt setting one up on a system to try it all out... I am impressed Carlos.....you been definitely scrubbing forums to learn what ppl want ....cant wait to see how it works.
I'm looking forward to seeing real-world experiences of people with the Maven! It definitely looks like an amazing tester based on your description. I will be considering it for my upcoming 50g build. Keep up the good work!
Really excited about The Maven coming up as part of the Hydros Control System. I'm slowly moving out from other brands of automated testing units. And I know that you guys will deliver something robust and reliable as the others Hydros Units for the collective. I know this was a "bird eye view" of what it's going on "cooking", backstage at Coralvue, so many questions came to mind. But I know that you guys make them yourself as well, during the developing brain storming and testing. Can't wait to hear more information about it, like controlling and adjusting dosing as needed and all the possibilities and precision that we can rely on. Today is a great day to be in this hobby, kudos for everyone at Coralvue 🤘😎🤘🍻🍻🍻🍻💪💪
Being able to use it on 2 tanks has sold me. I know you're not ready to discuss pricing but I'm not interested in how much it costs per test vs the actual unit.
Same here, I'd like something to test a few more systems but the ability to test 2 is awesome.
Background knowledge of the 'other player's' devices...... Stand-alone operation....... All in one (core 5 elements) testing.... Small form factor...... Ease of use/maintenance..... Hopefully competitively priced and good support..... This checks all the boxes for me and will be used in tandem with my Trident. I can get past the 'proprietary reagents' as all companies can run into supply chain issues as we all should know by now.
Totally depends on the price of the reagents to be able to tell if that is a good move for coral vue or for the customer.
This is what we have all been waiting for. Thank you CoralVue!!
Nice can't wait to see the approach taken with this device.
Product sounds amazing, can't wait for the how to videos, when used in conjunction with the dosers do I have to manually adjust the amounts dosed based on the test results? Or will it adjust automatically?
Beyond excited for this release! This will be the first smart tester I buy. Some questions I have.
How long does each test take?
Does the length of the dosing tube lines need to be a certain length, ex. most testers require a 6ft line.
You said it has one stepper motor that does not need to be calibrated!?!?
Thanks! Keep up the good work
Such an amazing product and great size
Ph! That’s the absolute only thing I wish was also on this. But I’m still happy! I’ll buy a ph monitor as well from you guys to.
I’m very interested in this tester ;
Can you disclose if the hydros system has a public API that can be used for pulling data direct from the device ?
The Aqua-Arium, LLC would love to Beta test a Maven at our store!
I am very excited about this new product but also let down that price and delivery date are not available. I hope it does not take nearly as long to reach the market as Kraken did from announcement to ship date. I also whist you would share a photo of the full setup including the reagents and tubes.
I apologize that the podcast did not provide all the necessary details during its initial release. The Kraken will be exhibited at the CoralVue booth in RAP Orlando. As the unit is undergoing rigorous testing, the release date is currently unknown. We will keep you posted as soon as it becomes available to the public.
Hey boys !!! Loving the podcast
I’m agree with you Carlos
Awesome just in time
I’m new to the hobby and I'm excited about this 😆
Only in the fourth quarter?? Come onn release sooner please
When's the release date
What’s the display look like? He said it’s WiFi available so can the test results be seen off an app? And/or is it showing on the screen with a history ?
Cost of reagents
How long does it take to test all the tests from start to finish
Hi I love that is stand alone. But if I acquire the "Launch" can I connect Maven after?
Yes, most definitely you can add onto the Maven with any of the other HYDROS devices to form what we call a Collective.
Heck yeah! like others I am excited about this one too. you guys got some nice products coming down the line.
couple questions:
how close is close for the 2nd tank. we talking less than 5 feet or more than 10?
how much room to the regents take up?
where does the wast water go?
will the regents be plentiful?
are they ( regents) sold single or in groups?
Can’t wait
Hope you guy in la. are all ok
I like hydros but the x10 as an alk tester hasn’t worked
Bring it!!!
🤩🤩🤩
10:50 is my reason why I’m going into the Hydros world. Love my GHL but they are tripping with the IonD
Wonderful
Looking forward for this. Also hope I’ll be able to figure out a way to get this in Sri Lanka.
I understand this is new but how does the automated testing work with the Maven??
The clear housing will scratch throwing off the laser
Why not add a ph port so we can measure literally everything we need with one device?
I’m interested in this product but in this video who is interviewing who but basically it’s the Trident NP vs The Maven
Alkalinity it’s the master
Tell me where to send CC info. I don't need or want instructions. Just bill my CC and ship it.
Realest date???
I'd be happy to be a beta tester!
Is there any datasheet?
Is not enough information on the product itself.
More information will be released as the product gets closer to distribution
Do $699 guys. I see that as a worthwhile price point.
Sorry joined late but was price discussed?
The price of the Maven was not discussed and is not currently available.
No concern about salt residue being leftover in the cuvée without a RODI flush?
Trident does it with no problem just using tank water. Having an air purge should help even more.
@@clintwarren1187 I think “with no problem” is a bit of a leap. The cuvette in the trident gets super dirty with buildup and it seems like people complain about bad test results when recalibration isn’t completed regularly. The cuvette stays at least semi-moist between tests in the trident so it seems like that would lead to a slower build up compared to air drying the liquid out and leaving anything that could build up behind after every test. I suppose we’ll see though. Definitely interested in the maven, but I do have my concerns.
@coralvue when will they hit shelves? Maven, Launch
There is currently no official release date for Maven, and unfortunately, it will not be released simultaneously with the Launch.
Noice 👍🏽
I understand the not in deep information, as this is only a teaser. But the video is just hard to watch! For a product that a lot of reefers are waiting for, you guys wasted the opportunity to make it great! This should have been a super easy video to make as we do want the product, but the format used is just hard to digest; talking about everything and nothing all at ones is just hard. You guys need a new format and/or host...or stick to what you have but keep it in the normal schedule podcast/talks, not a introductory/launch teaser.
A common issue with Hydros videos. Most of the time it’s just rambling, stalling, etc. Overall, the controller is nice but the format and host just turns a 5min video into an hour. They’re generally all painful and this one is in the running for one of the worst. Horrendous formatting and topic coverage. Something needs to change or many of us will never watch another Hydros video.
@@MRey-qe4by 100% right, all CoralVue videos are the same weird format. This is specially painful as the Maven is long wanted.
What does the Interface look like? All That is mentioned is a "APP". Is there going to be a web interface for old people like me that cant read a damn cell phone?
The interface will look like the current HYDROS app which is also available for a computer desktop.
If its good has you's are saying and its easy reliable and not tooooo expensive then its gonna be a massive seller the reagents bit sounds well dodgy lol
I’m a huge hydros fan, but with all due respect - don’t announce a product without a release date and a price. This is sales 101.
Right, that just means it's got alot of testing and bugs to work out left to be done before its ready if u ask me
Ask Ledger lol announced Stax almost a year and half ago.. it was supposed to be 3 months out when announced and STILL nowhere to be seen..
Also.. with the amount of tech being used of the prism, measuring through plastic and glass layers.. so much that can go wrong that I think that’s why they are covering their ass not giving dates or price.. but then again yeah they should’ve not bothered announcing it..
Video games do this all the time
So do movies
Where is everyone
Shut up and take my money!!!!
The x10 alk testing has been so unreliable. The device reads so different from salifert Hanna and icp
I'm sorry to hear that you have been experiencing issues with your X10 alkalinity tests. To resolve this problem, please contact our support team at Support@coralvue.com. It is important to note that the X10 alkalinity test should give results similar to that of a Salifert test. Also, please be aware that ICP testing does not include alkalinity measurement as it is not an element. Therefore, the alkalinity test is performed separately outside of the ICP machine.
The guy owns the company but skippy over on the left won’t let him talk. Worst interview ever. Guess I’ll wait to see legit reviews.
Guys, you jumped the gun, why do this big unveiling video when it isn't being unveiled? I know you're excited about this product, but you need to wait on an unveiling. You really have no idea on price? That's disingenuous, or else you wouldn't have bothered building something like this. This came off as just puffing of the chest, "look at what we're gonna do, at some point, no idea when, and we have no idea what the price will be..."
It's all great if you can program things. I cannot.
That's the advantage of the HYDROS app is its ease of setup/programming. There is no coding involved.
Waste of time. No meaningful data given.
Slim on the info. Way too much back patting and fluff. The one guy talking over the other one was absolutely annoying as well. Slow down and stop repeating the same thing over and over or trying to jump on the other guys sentences.