Mini B install Spektrum RC Firma Brushless Motor/ESC 2-in-1 Combo (6000Kv)

Sdílet
Vložit
  • čas přidán 15. 04. 2023
  • Spektrum RC Firma Brushless Motor/ESC 2-in-1 Combo (6000Kv) for Mini T/N
    Parts Installed Links:
    Spektrum RC Firma Brushless Motor/ESC 2-in-1 Combo (6000Kv)
    www.amainhobbies.com/spektrum...
    175RC Mini T/B High Load Motor Screws (Orange) (2)
    www.amainhobbies.com/175rc-mi...

Komentáře • 18

  • @runwithmikerc1047
    @runwithmikerc1047 Před 10 měsíci +2

    Good Video man! Doing the 2 in 1 makes everything look clean!

  • @speckledjim_
    @speckledjim_ Před 8 měsíci

    Ive just set up the spektrum 2in1 system in my mini b, its good bit im getting a lot of jittery interferance, mainly throttle input

  • @davidseychell
    @davidseychell Před 9 měsíci

    great car and great video bro super helpfull

  • @skyhawk21
    @skyhawk21 Před 4 měsíci

    Does it still spin smoothly or does it grind and lock up like something isn’t right?

  • @zatoichi-pw6ek
    @zatoichi-pw6ek Před rokem +1

    Good video. Is this car the one that you are running in your other video "woodland park", and how does the motor run and what do you think of it now that some time has passed? would you still buy the same one? thanks, have a good day.

    • @txak47
      @txak47  Před 11 měsíci

      I like the motor it is just enough power. If you are running on a corse, you will not be able to use the full power. It never gets hot. It is great at this price point.

  • @davidseychell
    @davidseychell Před 9 měsíci

    hi
    this motor
    run on 3s???

  • @runwithmikerc1047
    @runwithmikerc1047 Před 10 měsíci

    Question...where did you get that tray you are working with the RC?

    • @txak47
      @txak47  Před 10 měsíci +1

      I got the tray from Harbor Freight.
      www.harborfreight.com/search?q=silicone%20tray

  • @mkultra6228
    @mkultra6228 Před 11 měsíci

    Make a how to program for different modes tutorial please

  • @keithtappe6505
    @keithtappe6505 Před rokem +1

    What receiver are you using with this motor?

    • @txak47
      @txak47  Před 11 měsíci

      Sorry for the late response. This is a link to the radio and receiver I use.
      ATA HOBBY Radiolink RC4GS V3(V2 Upgrade) 5 Channel RC Radio Transmitter and 2Pcs R6FG Receiver with Gyro 2.4ghz 400M Remote Controller Kit for Car/Boat/Crawler/Tank/Drifting/Buggy with Lanyard a.co/d/g6lVjRz

    • @txak47
      @txak47  Před 11 měsíci

      This is the rechargeable battery for the radio.
      7.4V 2800mah 20C Lipo Battery Li-Polymer 2S for Radiolink RC3S RC4GS RC6GS Transmitter Reomote Controller a.co/d/4s3umIM

  • @nathanedmiston6659
    @nathanedmiston6659 Před 11 měsíci

    The motor heats up and makes the loctite not wor anyways

    • @txak47
      @txak47  Před 10 měsíci

      When running on dirt tracks, I had the screws back out after a long race. Wearing down the gears prematurely. I started to use the Pink Loc tite, and it fixed my problem . Sometimes, I would use Blue Loc tite in a pinch. If your motor is getting that hot, you might have your car over geared. I found that I can under gear and turn my ecs up a little to take stress off of the motor. A over loaded or slower moving motor runs hotter in my limited experience.

  • @ProTexTV
    @ProTexTV Před rokem

    I'm in Grand Prairie. Where do you run your car at?

    • @txak47
      @txak47  Před rokem

      I travel a lot, but when I'm in Texas, and I want to race a Mini, I like to go to GoldStar in Arlington and North Central Texas RC in Alvarado.

    • @txak47
      @txak47  Před rokem

      There are a lot of good mini groups on Facebook.