2019 Ram Big Problems After Disconnecting The Battery
Vložit
- čas přidán 7. 10. 2019
- So during the last video shoot I disconnected the battery on the 2019 Ram Rebel as part of the Mopar led bed light installation video and well after reconnecting the negative terminal the truck had defaulted to a setting that deleted the heated seats and steering wheel also deleted the back up camera and worse yet the A/c wouldn't work, I thought for sure my truck had to go to the dealer but I solved the problem and I let you know the whole story in this video, oh yeah we burn some rubber at the end. Enjoy.
Follow Me @
Instagram / hammerdown_. .
Facebook
/ hammerdown-m. .
For all your beard product needs check out
1740beardbalm.com/
and use promo code Hammerdown for a 15% discount
Send Stickers for the trailer tool box to PO Box 68 Mohnton PA 19540
Westy @ Westy's Speed Shop
Check Him out @
/ westysspeeds. .
Instagram Spacemountainsupercars
Check out Todd @ TSE's auto accesories
/ tses-v. .
Check out my Sponsors
vortechsuperchargers.com/
www.coldairinductions.com
www.diodedynamics.com/
www.p3gauges.com/
www.novistretch.com/
www.americanauthority.com/
6ledesigns.com/
www.tirestickers.com
zl1addons.com/
www.gopowersports.com/
www.jmschip.com/pedalmax/
www.borla.com/ - Auta a dopravní prostředky
Get to the point. Good gracious. 11.5 min video just to say let it sit it will reset itself. FFS.
Adam Dye you will watch it all oh yes you will watch lol
Exactly 🤣😂😅
Really it fixes its self?
The sirius over the air up date completly screwed up my screen works sometimes the goes black.
The radio acts like its possesed by a 5 year old, and it locks me out while it has connect to bluetooth?
Try it it will not connect or let you do anything.
Mine is a 2018 Sport with a nice inteior leather, nav.
All the good stuff but you hardly get to use camera or anything else to do with screen
I have contacted u conbect a dozen times.
Im sorry there are no updates to down load.
But sirius they want you to suscribe to this mess.
Lmao 😂 when this happens your aggregated already and like wtf just say it lol 😂
SMH 🤦
Just experienced this same issue on my 2020 Ram 1500 Limited when I disconnected my negative terminal. Just like everyone else, I was freaking out. Would have never guess letting the vehicle sit over night would have corrected the issue. It works. Thanks for the posting the information. Even after 1 1/2 years it is still very beneficial.
Yep I freaked out too this is here to sooth the agony and bring comfort
So you let it sit overnight disconnected
?
@@thewaxdoinks6489 he left the battery hooked up over night and it corrected itself
Thanks for posting this video! I just disconnected my battery this evening and it had all of the same issues you described and I was beginning to worry I would have to go to the dealer to get this fixed. This video gave me some piece of mind!
Good info, but damn bro get to the point!
Great video. I just experienced this and honestly thought I would have to spend thousands of dollars in repairing this issue. Could not believe a simple turn it off, let it be over night and problem solve. Awesome
I had the same issue with a 2019 RAM 1500. When I contacted Uconnect customer service, they mention that it is normal and that it takes 3 - 5 ignition cycles or a specific amount of time for the Uconnect to use the cellular radio to obtain the update needed to get the truck settings back. FYI for future viewers.
Stephen Brown exact same dam thing they told me they told me that I should take it in for service haven’t yet.
This literally just happened to me and I was freaking out ..... great to know though
thanks.
Happened as i was trying to troubleshoot Android auto bug and i was freaking out. This video pops up in my search for Android Auto fixes like a sign from the car gods. 2 ignition cycles fixed it. .... and my AA issue is fixed to
The longest video ever to figure out I just need to let my truck sit lol
Thanks. Same thing happened to me. It updated over night. All the settings and controls came back. You shaved off a lot of anxiety for me. Lol
Get to the point.
YES!!!
Just found your channel a few episodes ago - love the content your doing. I’m very close to getting my Rebel which will be very similar to yours. Same colour and most options. Your giving me a whole lot to think about!!! Keep that hammer down!!
awesome glad to have you I personally love the rebel all the manufacturers have their issues but the Ram is a solid truck
Hammerdown Motorsports agreed! I have spent a bit of time looking around and always found myself right back at the rebel - would love to hear your exhaust in person for a true sound..I’m very far away! Not sure it would be for me - May have to take it a step below the Attack...but who knows!! Keep it up and thanks!
Just did an intake on mine same thing happened I was freaking out. Good thing I saw your video. Thanks
Marselo Escobedo you bet
Thank you for this video. Just installed a Mopar air intake on my 2020 Longhorn this July 3rd 2021 and lost everything you described in your video. Called the dealership and had an appointment set for the 12th. Took to looking up the problem on CZcams and your video was the first video to click on. Watched it, left my truck sit for an 1 1/2 to cut grass. Came back to to back the truck up to was and wax, and everything came back. Was relieved but didn’t worry after seeing your video. Thanks for the info you provided and have a great holiday weekend.
very glad to help happy 4th
Thanks for posting but I can’t be the only one who was like dude just say what to do 😂
Just happened with my 2020 ram. Everything fixed except surround view camera. Says unavailable. Worked before the battery swap just fine. Been sitting for a couple days and drove it around a bit. Any ideas?
So I just did a cold air intake on my 2019 Ram Rebel as well and I was freaking out till I saw your video! Hopefully it’s all back to normal in the morning 🙏🏽 thanks for this. I always enjoy your content 👌🏽 got a Rebel because of your videos 😏
You will be fine thank you for watching I appreciate it
Thanks for the video. Have a business trip tomorrow and was freaking out. And yeah, the heat is crazy hot!
Glad to hear that it all worked out for you.
Thanks for sharing 👍🏻
Thank you so much for posting this video. I installed a K&N intake this morning. Disconnected the batter as per the instructions, and when I fired it back up.... Nada. All my options were gone. I'll let it sit today and hope all of my controls come back. Thanks!
Did the controls/settings/options come back eventually?
@@089Screech they did. After letting it sit. After the consoles came back, Android auto didn't work right away but came back the following start.
Did all your options come back after all ? And how long did it take ? This is happened to me just now
@@jafetfranco6171 Everything came back really pretty quick. Just needed to reconnect to UConnect.
I’m going to let it sit until tomorrow and hope it comes to normal, thank you !!
It’s a helpful video from 8-9 minutes. I appreciate the knowledge non the less.
Damn , my 2022 Laramie reverses camera guide lines don’t move when you move the steering wheel!!! Wonder if that’s normal or if I didn’t get the right package. Or it’s broke
Yep Tru .. Everytime u disconnect the battery for more than 10mins the system will reset. Let it set overnight will resolve the issue.
Happen to me all the time. 2019 Rebel . Nice video. Thanks
Hey bro. Love your ram vids. Just had this problem after installing a PedalMax. Thanks for the info!
gr8 vids---- I have had this problem on a couple of different costumers units. In both times the battery had ran down a bit before the ground cable { and I emphasize ground} was removed. When work was done the ground hooked up and all seemed OK. Next day the customer came back complaining some of the BCM controlled items were not working. We disconnected the ground and charged the battery to full 12volts , load tested it and reinstalled the ground . Started the vehicle , let it run for a half hour or so and everything was good. We believe to make sure the battery is fully charged before hooking the ground
I just got battery replaced in my 2015 and all seems ok except the AC.
It started off hot to warm then eventually cool but not cold....it was frigid before the replacement but not now...so I hope the over night setting as you said fixes itself...ty.
BTW, beautiful Ram you got there...good luck with it
Some vehicles have to have a 9 volt battery hooked up so you don't lose that information. Keep us updated.
Good to know it will fix itself. I was about to disconnect the battery to try and reset the ecu cuz I was having issues after installing FyreFly LED interior lights. I ended up uninstalling them and bought some Diode Dynamics and have not had problems ever since. I've read some horror story where someone disconnected the battery and activated the theft alarm and locked them out from using the vehicle!
crazy I've never had this happen on any car I've owned so thought I would share super scary at first
@@HammerdownMotorsportsUSA Thanks for the video! It's hard to find any kind of info on these trucks right now.
LOL, I just found your video - because the same thing happened to me recently! I went out to drive my truck and heard a click and a speaker pop and ... nothing. Battery was so dead that the electronics stopped about 1 minute later. No door locks, no power running boards, nothing on the dash. Dead. Jumped it after connecting to my wife's car and waiting 5-10 minutes, got it to the dealer: bad battery. Went to leave, no backup camera, no heated/cooled seat controls, like WTF? They used a wireless remote connection to reset the system, but it's good to know that you can just wait it out and it'll fix - thanks! That's an extra bit of "peace of mind". Drive safe & stay healthy!
"HammerDown"im going to install a "Gang Switch"to my ram.i know i have to disconnect the "Neg"battery.so when i reattach it how long should i let the truck sit?..like a couple of hours like you suggest?
don earl it usually takes an hour or so but you can still drive it in the meantime if need be it just won’t that the back up camera or sat radio or heated cooled seats enablers on the display
I have a '17 ram and replaced the radio with a newer version. All you have to do is turn on the key and let the radio start up and then shut the key off for 10 to 20 minutes and they usually will reset to all your options. there is also a key combo you can you when is gets messed up that does a factory reset and then turn it on, then back off for 10 to 20 minutes and it will reload your options. scared me the first time but did some research and it seem to be how they are set up.
If you swap the battery with the trucking running would it stop this from happening?
Just changed the batteries in my 2018 Chrysler Pacifica, same exact thing, I was freaking out, thanks for the pease of mind, I’ll go check on it in a few hours.
I have the exact same issue after an unfortunate dead battery due to a radio being left on....Just jump started it and discovered all these things---are GONE. I did a number of shutdowns and restarts and still nothing....I'm currently letting it sit for a few hours to see if they all come back :-( Will update....
{UPDATE- 1 hour later....) After leaving the truck sit for exactly 1 hour and 15 minutes.....I started her up- and BOOM!- EVERYTHING is back, settings included- just how I had them!
Thanks so much for posting this Steve! I am absolutely delighted not to have to go to the dealership on this!!!!! :-)
Hey how's it going just watched your video as you were numbering things off that we're gone I was agreeing as you went along I have disconnected my battery a couple times for electrical safety and each time you lose XM you lose camera if the heat works it won't get real hot it'll just be kind of warm AC I didn't try because it was a cool night camera as well all the same things you lost but anytime you have to do it don't worry about it it all comes back say overnight I don't know exactly how long it takes to come back but overnight does it just fine so don't let it scare you the next time thumbs up on the builds can't wait to see the rock lights in full effect
Thanks for the info, worried that I had messed things up when disconnecting battery.
Just got the same problem right now! Thank you for the video!
Had the same thing happen and same fix. Have had another issue where Sirius presents stopped working for about 45 days then all of a sudden returned. Never did take to dealership. Other times disconnected battery no problems on restart. Who knows. Glad all is back to normal.
This video helped out a lot ! Thanks!
I had just jumped start my truck. And when I did that the truck started the light and all came on, but my screen just stayed pitched black. Tried the on botton on the volume and nothing and the screen off bottong and nothing. I turned off the ignition open the door to reset everything start up the truck again and the screen still off. The ac manually works and all the bottons around but nothing on the screen wi come on. Any suggestions? I hope you reply back. Thanks
Wouldn’t have had that problem if you would have bought an 80s Corolla or Celica like uncle Scottie told you to
Lol
2dthoughts 😂🤣😂🤣😂🤣
so true
I mean he isnt wrong
Underrated comment 👏
All I have to say is thank you for making this video. I can finally breathe now.
Dealer changed my steering wheel today and disconnected the battery. Told me to wait 2 hours, nope. Glad I found this video. We shall see tomorrow
Did it fix itself?
Did you disconnect the battery to install your JMS pedalmax on this truck or the one from the other video? I'm asking because I'm planning on getting one for my 2019 Ram 1500 Laramie. I'm thinking the directions says to disconnect the battery; and I'm just wondering if I should anticipate this issue. Please let me know.
Big Sam Rothstein it does say to disconnect it but at my own risk I didn’t and I personally had no issues installing the pedal max on either truck
It does say to disconnect it in the instructions I at my own risk did not on either truck and didn’t have any issues
Tech always goes wrong in cars it seems. Good to see it’s fixing itself though
Happened to my Rebel twice. I had to disconnect the battery and leave it disconnected overnight. Then hook up it back the next morning. Luckily that fixed it both times. I’ve noticed if you disconnect the battery and it sparks when you hook it back up you will have issues with the screen and settings.
I think all FCA vehicles do this. My chargers uconnect screen was blue and had a Chrysler boot screen after I disconnected and reconnected my battery.
I have a 2500 with rambox what kind of tonneau cover do you have?
its a truxedo
Same thing happened to me on my 2020 Rebel after I installed my K&N. The apps eventually come back after the truck sits.
Just had it happen on my 2021 warlock
Omg you’re right!!! I had same exact thing.. I watched your video and just ran out and tried it and yes!!’ All back to normal.
AS I was I saying every thing on my truck works but when I took the truck to get a smog check it was rejected because when the dealer replaced the defective battery they did not reset the computer. called the dealer they said I could drive the truck about 30 miles at 60mph four times and it would rest it self or pay them $175.00 to hook it up to there computer and they could wind the miles on it that way. SO I drove the truck. then had it tested rejected again.the guy at the test booth said need to run the truck 50 to55mph consistently. do you know any outer way???? or if this going to work. There battery went bad and I have a life time warranty you would think they would had made it right. Help if you can warning for outers.TRUCK IS 2017 HIMMI 5.7 WITH 15,000 i'm 73 when i was 50 I could though 90 lp begs of concrete in the back of a truck now maybe a 5 lp beg or I would be in jail for kicking some ones A## by now. 'Just a little hummer '
Yes unfortunately when you replace the battery the short term memory of the truck that sets the monitors in the computer saying they are within specification gets erased, it takes a few drive cycles like going up to operating temp and cooling down overnight and some highway driving to reset everything if you go to autozone or if you get yourself a cheap code reader it will show you when the monitors are set on mine they stop flashing on the display but if you drive it for a few days you should have them all set for smog, and it shouldn't fail just come up untestable and they should retest it for free as part of your initial cost.
Thank You vary much. love watching your videos
I had the same problem just today! The apps are gone and will be reinstalled via overhead satellite, as long as truck is parked out in the open! Hopefully all of mine will return by morning.
Keep that hammerdown!
😂 exact same thing happen to me when I disconnected my battery. I was WTF. Most of the apps was gone. I had to go to dodge for them to reset it infotainment system.
MR. CEO dam did they tell you anything?
I just lost my apps as of today for removing my battery also on my ram and I’ll wait and see when they come back thanks for the video so much!
They will no worries
Thank you for letting us know what to do !!
I had the same issue once I had discontinued the battery and it did the exact same thing I ended up going onto the Uconnect website and had them send a reset signal for radio did it that night got up the next morning it all all good to go.
Just went through this.... Then I found your video... Thanks for this video....
Absolutely
Thank you for the info update that helped
Thank you I changed my big horn battery today and within 5 min all my stuff was restored. I think I fixed it by playing with the gps
Tell your dealership the pin out instructions with the OEM bed lights are incorrect. However turning the hazard lights on will make them work 😂
Had my battery drain at minus 30 celcius and after restart everything but my sunroof worked. A week later and daily starts sunroof and shade still not working.
May need a reboot
My Ram Limited is doing the same thing.
Crossing my fingers and hoping it fixes itself.
My dealership wanted to charge $85 to flash my bed lights, so I just put a switch in for about $5
the only thing is I want them to come on when I open the tailgate so I guess it will be 85 bucks for me
Hammerdown Motorsports yeah, guess so. mine definitely don’t do that
@@2dthoughts Try adding a switch like the one that old vehicles had under the hood for the light. It goes on a neg i believe it should work when u drp the tailgate. Goodluck 👍🏽
My Ram did the same thing. Gotta give the computers time to reboot. Within an hour after leaving it alone everything came back. UConnect is known to do this
What about putting a battery tender on the battery cables before you disconnect it?
TheGreekAV8R you can buy a tool that has a small battery in it to retain a small amount of voltage while it’s disconnected I’d probably more so use that since a tender isn’t a battery
@@HammerdownMotorsportsUSA interesting. i used my battery tender/maintainer when swapping out the battery in my wife's sienna. clipped it on the cables before i disconnected the battery and didnt lose any presets in the radio.
Thank you!!! You gained a new follower
It just happened to me how did you fix the ac or did it fix by itself???
It still does it but doesn’t affect operation so I left it I avoid the dealership like the plague
My 3500 radio is locked after swapping out batteries. It's asking for an anti theft code. I'll have to contact the dealer because it's day 3 and it hasn't fixed itself
I've always changed my own batteries in my vehicles, but now I'm not sure I want to do this on my '17 Ram. I know I'll freak out if stuff isn't working after I hook it up. I'd hate to take it to a dealer and pay $200 or more for a battery, plus another $80 to have them install it. Good video. What type of camera are you using? Very clear video.
Sad this is still an issue… glad I found this video just installed air intake on my 2021 warlock and siriusxm and backup cam gone like how is this an issue still half way through 2021…
I know right I’ve never had a vehicle other than this one do that
@@HammerdownMotorsportsUSA thanks for the quick reply legit got this truck two days ago and I’m here shutting myself I pray sitting overnight does it
@@jayce2299 yeah I did the same thing when it happened to me but now I just expect it when I disconnect the battery
@@HammerdownMotorsportsUSA just checked and all back thank you for this saved me so much BS! lol
This happened to me as well. I keep losing the entire screen. It just goes black. Usually comes back on after driving it and letting it sit. It did not this last time. Disco'ed negative terminal for 10 minutes and after reconnect half of my stuff was gone as you describe. I didn't wait and took it to the dealer. They were able to somehow reset it. I find it interesting that the service manager didn't know the data eventually comes back after time. How do you not know this? My screen has gone black again and I have disco'ed the neg terminal again. Waiting to see if everything comes back... Supposedly I'm getting a new radio. There is also another update coming at some point to fix my screen issue but who the hell knows. Very aggravated with this screen. Its about the 6th or 7th time its done it since I bought it 5 weeks ago. 2020 Limited
Thanks for the video btw
Hey man, when you installed your throttle performance for the 2019 ram and you disconnected your negative battery port, did your back up camera and satellite radio not work for a while?
Yup I made a vid on that too freaked me out lol but it’s normal
@@HammerdownMotorsportsUSA is that video or is that another video on your channel?/what’s it called? And thank you for telling me I’m not crazy haha it happened and was like 😳 Dafack!
@@victorpaletta7918 lol yeah its 2019 Ram big problems after disconnecting the battery
@@HammerdownMotorsportsUSA thanks man! Just watched it
Gonna let the truck sit over night and hopefully it all goes back to normal in the morning
@@victorpaletta7918 absolutely it will be fine the first time took longer on mine like overnight but the second time was like 2 hours
Just ran into the same problem with disconnecting the battery, hopefully it comes back!
It will you will be fine
Do you have to leave it disconnected over night or do you reconnect it and then it sit?
@michaelwhite7210 sorry buddy just saw this.. reconnect it and drive it like normal it will eventually come back mine took a day or so.
Disconnected my batter to put on the sport roll bar and exact thing happened to me. I played with the screen for a bit and within 10 minutes all functions came back. Heart stopped for 10 minutes tho
Isaiah Hall I know the feeling 100 percent
The back up camera is federally mandated to work. I would file a complaint on it with the NTHSB. It sounds like there is a software issue that they need to fix on it.
It is NOT Federally mandated to "work", only to be equipped with. If the camera does not work, no law is broken.
My fuel gauge on my 2014 Ram 1500 would read erratically. It was at 8k miles. I traded out of it in 2015. Silverado gives me zero issues.
Just put an intake on my hellcat and exactly the same issues happened to me. I freaked out for a minute.
Funny disconnecting the battery , worked well for me , my 2014 ram one morning used the command start only one beep from the truck , went inside says command start disabled , normally start to enable it I turned the key and one click is all I heard , thought it was the starter , but disconnecting the battery for a day , reconnected it today started right up ? must have killed something that was disabling the starting of the vehicle ? If we have to worry about removing the battery from the truck think we are in trouble .
discovered that the wireless module and the keyfob get disoriented some how , removing the battery cable fixes and resets' it , I am one happy dude now and learned something .
happen to me today. would you say after 10 hours its back to normal?
Anny Payano yeah it should be
Anny payano Did it come back to normal? This just happened to me ! And overthinking here
Mine did that too, i was at the dealer though and they flashed it.
that's good to know,but did you ever try to zip tie the positive n negative cables together for 10-15 min
I did not that just bleeds down all power in the ecus this system just needs to reboot everything and it takes longer than one would expect
thanks for the heads-up
this is a problem I am dealing with now, I'm getting banging sound when the truck shift gears from 1st all the way to 7th. I beleave its the slip yoke as it slides into the transfer case.the dealership say there nothing wrong. but I'm going to remove the drivshaft and grease the spline of the yoke
I just put a new intake in my charger and this is what exactly happened to me. My ac wouldn’t work. Backup camera wouldn’t work and my SRT dashboard and modes wouldn’t work and scared the crap out of me
Enough to give you heart failure!! Glad it all worked out in the end. :)
I got a urge the urge for more Cowbell I mean Rock Lights!
Appreciate the video brotha, I am currently in a bad frame of mind because I had to replace my battery on my 19 ram, and the check engine light went away after 2 cycles, but my uconnect constantly reboots, the backup camera works but that’s it, I have zero functionality it’s been 48h now. I took it to the dealership and they told me that they could not hard reset and I need a new $1200 head unit. The guy kept implying I did something wrong during the swap. I did not, I’m a handy guy and I was very careful. Please help I’m dying here bud
Joel Peguero I did a reboot with my tazer it helped with some of the issues but it needing a head unit seems a bit off the first time I had mine disconnected it came back the next day and not it only takes an hour or so I’m a little baffled at what yours is doing but can always disconnect it again and see if it irons itself out
Hammerdown Motorsports big thanks man, I just realized they took the connectors off again at the dealership today so I’m just going to be patient and hope my case is just like all the others.
Steve, Need help Thursday i had Ram dealership add my Magnaflow catback system. no problems after driving after 100 miles . On Friday i decided to Install myself the Hellwig 7883 Rear sway Bar. Then I installed the New Mopar Ram Air flow cold air intake. I Disconnected the battery both Pos and Neg. the only electrical connection was the Maf sensor which plugs into the new exhaust. hook everything back up. First think no cameras at all blue screen for all.i then drove about 3 miles multi message on my dash. rear Stabilize. traction control off cruise off and both front and rear sensor off, and Anti locks brakes outs.. When you shut down the truck everything goes back to normal when starting up again. My sat radio was yesterday working. this morning no sat radio keeps searching , no other indication then drove it about 3 mil everything happen over again. so i was think weird but maybe it was the Hellwig rear sway bar so i put the oem back on. The only reason i was thinking about this is because this is the first indicator i get rear stab. and anti lock brakes. so nothing has change still the same warnings .
hmmm yeah that is odd, a sway bar should not affect anything, I think more so it was disconnecting the battery if it is still doing it I would disconnect the negative terminal then wait about 10 to 15 minutes then reconnect it and let the truck sit overnight this will give it time to reboot everything if it is still acting up you may need the dealer to manually reboot it I was able to do this myself with the z automotive tazer DT I have equipped on my truck, hope this helps
Thanks I will try that
@@HammerdownMotorsportsUSA 2019 Ram 1500 Limited. I discounnect my battery for installing th eMopar Cold air Intake as per the Instruction . Reconnected everything started truck no cameras. drove down the rad for 5 mins and then all of the sudden. Anti-brake, Cruise control, fwd/rear warning alerts, 4 wheel drive, All of these are indicated on my instrument cluster. after driving for 2 hours and i got home disconnect Neg. let it set for 30 Mins and tried it again. all lights off camera is back but after 30 min all the instrument cautions came back. stop at auto zone and use the basic scan tool no codes found. I saw some scan tool does a battery reset. could this fix my problem.
@@atlasraptor9322 I’m not too sure I know the reboot on my DT Tazer will reset the computer that worked for me but if it was all back and then went away I’d be looking for a possible loose connection
@@HammerdownMotorsportsUSA Got my Ram at the dealership it was the rh Rear wheel Speed sensor that cause the issue. just happens to failed at that time. Or could it have been removing the Neg. cable sent millivolts to short out the speed sensor who knows. As far as the 12in screen that just reload it for me everything see normal now. Thanks to all who comment to help
Is happening to me now. I just replaced my battery and my camera gone from my screen and doesn’t work when you put reverse
Thanks for the video. I will let my rest for tonight
@@maykelllerena9209 yep it will all come back
Ram's need a few hours to reset their Apps. Its frustrating however it all comes back. What freaks me out is not having my cameras. Without them its really difficult to park.
😲 WOW, a two minute video turned into over 11minutes ? It's like company computer generated answering machine, press 1 for _ press 2 for _ etc. Thanks for eventually getting to the point.
I wonder if that is forecasting the future. 😬 Hope they don't try to give you the runaround if you have to get warranty coverage 😕
I doubt they will I know the service writer there
I had a similar problem with a Charger R/T 392 Scatpack. Battery was disconnected and I started seeing just Chrysler on my screen instead of the bee. Took it to the dealership to have them look at it but it had corrected itself. They said after a couple starts it would rediscover itself. It was a strange problem but very minor in the end.
I removed the battery twice. Once the computer finishes rebooting all the radio and xm options work.
I just did this bed light install and upon reconnecting the battery my truck has gone absolutely nuts. It won’t start and it can’t release the brake so I can’t even get it towed
use the fob to push the start button physically it should start
Wow I didn’t fully plug one of the ECU connectors in ! That will definitely screw up your ride lol everything is back to normal
Changing a dead battery on RAM will be a 3-4 labour job at the dealership, to get everything to boot up again. Lol
yeah I just would let it sit for an hour or so and back to normal it goes
Ty you just gave me pace lol
Use an obd2 memory saver to keep the vehicle memory alive.
Thanks.
Me too!!!!!!! Man I was freaking out in the exact same shoes as you! Just made my first payment and then this shit happen! I am hoping that your right let me let it sit over night and first dam thing in the morning ima try it out.
Ricky Martinez it will be fine mine does it every time I disconnect it but yeah it freaked me out for sure
Hammerdown Motorsports thanks man! Yea I was installing an amp and man I was freaking out shitting bricks lol
@@rex44rm I take it that it all ended up fixing itself?
I hate them heart attack moments!
What exhaust???
That was the bola Atak now I have AWE
There are a large number of modules (HMI’s, etc) that need to initialize on startup and a battery pull is a hard start. Just takes time on these ones. Long computer reboot. Nice truck!