BASIC C-NOTCH. HOW TO DO IT YOURSELF.
Vložit
- čas přidán 5. 10. 2019
- In this video I do a c-notch on the shoebox project. This can be performed on many cars and trucks.
Instagram @puddinsfabshop
SUBSCRIBE SUBSCRIBE SUBSCRIBE!
#cnotch #howto #puddinsfabshop - Auta a dopravní prostředky
I'm spending my weekend watching all your old videos, and this is the one where you 1st used the phrase "sitting on your ass won't finish your project" 💪
That’s awesome, I had no clue which it was lol
The birth of the catch phrase!!!!
Its 2024 now. Watching this and getting a giggle out of "Baby-Face" Puddin'. 🤣
I'm diggin those whitewall tires with the steelies, can't go wrong with those.
Sure can’t!
Love going back and seeing the early videos. All goodin’s
Love all the videos. I stumbled upon your channel some time ago. I’m getting caught up on all the previous videos now.
I use a magnet with a bolt through it to hold plates like that. Gives me a little control. I enjoy your channel. You use a lot of old techniques i learned from my dad in his fab shop growing up. I worked in his shop after highschool. He taught me a lot of the styles and techniques you use. Great channel .
More beautiful work . My first air saw was one from HF and I was really glad they let me return it .
Thank you! I’m glad they let you return it.
Always amazed by the cleanliness of your shop! Thanks for another awesome video! Keep up the good work.
Thank you sir! I feel like it’s dirty most of the time!
Been keeping this video in my back pocket for a while now for when I needed it.
Looks like I'll be purchasing a chunk of pipe soon lol. Great work and vid.
The throw back music is smooth
You made that look as easy as rollin bales down a hill..Nice job
Great work
Thank you for your videos. I got a 53 Ford Mainline and your videos have been helping me out
That’s great! Thanks for watching!
Watched again was going to buy a kit but your way saves me heaps
Great content, very informative, all the best
Nice to learn and be entertained
Great video! 👊👍
Damn pudding your so clean cut ✂️ back in the day & intro in the beginning is kool 👏 alot has changed
Nice little tutorial
Love your channel
Top "notch" work!
Good one! 😂
Another great video 👍 great job on the C notch.
Thanks for watching as always!
Watchn reruns coz i cant get enough pudn vids ur to cool for school my bro
yes, i knew I would come across the closing line "sittin on your ass" at some point watching the old ones while waiting for new content. Awesome!!!
Nice job Puddin
Another great fab job. Keep up the good work.
Thanks!!
Nice work there Puddin
Good job! some really nice welding there Puddin Thanks
Thanks man!
Nice notch job
Great work....I'm using 3" block so going to try to get away without a notch. If I do , I'll be checking this video again! Keep up the great videos
Thank you sir as always
Looks Great!
Thank you sir!
Another great video!!!!
Thanks mark!
I always like first, then i comment, however, enough said. Forget about it. ❤
very kool thanks for sharing
Thanks for watching!
Awesome work as always man!
Thanks David 👊🏻
very nice
Thanks homie 👊🏻👊🏻👊🏻
Cool c channel
Awesome work as always
Thanks man!
Recently got into the mini truck scene and am now getting into this.. Not really used to removing material in such a way. I come from the xj world, we add steel to those.. lol
From some one that has done alot of these in this way what is the long term structural integrity? I plan on using my truck as it was intended from time to time, and cutting into a frame, especially one with leaf springs just gives me the heeby jeebies..
Hey Buddy. Just wanted you to know I'd love to hang out with you for a day. Cuz buddy you crack me up. Maybe not a whole day but at least meet you. Been watching a lot of your older videos to kind of see where you came from. Really enjoy your videos keep them coming. Oh yeah just ordered one of your sitting on your ass won't get your project done t-shirts. And it's got me motivated to work on my 64 galaxie 2-door. So thanks for that.
great work as always
Thank you!
This is badassery
Looks Good.
Thanks Carl !
This is the first of Puddin's videos with the best closing line on CZcams: "Sittin' on your ass, won't finish your project!"
Quick question. Did you bottom out the suspension to check that the notch is in the correct spot? The leaves straighten out during compression moving the axle back slightly. I know your leaves look pretty flat to begin with but it will move back some. I am about to notch my 56 Merc the same way.
Here ya go
Awesome work man. I have a 53 custom line that I want to c notch. This is exactly what I wanna do. I ordered some pre-fabed notches from gambino kustoms in San Jose CA but they are huge. I’m thinking it’s a whole different approach at c notching. This way looks easier and more affective? Not sure. Love the videos man. Keep them comin. Thanks 💪
Ya if you’re not doing air ride there’s not really a need for a big step notch.
that beardless Puddin'!! haha
Rewatch it better second time😁😊👍
Nice work 👍
Thanks!
Nice
👊🏻👊🏻👊🏻
Damn, clean faced PUDDIN lol :)
Cool channel.. thanks
Thanks for watching!!!
Nice work! Just stumbled onto your video and immediately Subscribed! Maybe i can get motivated
to work on my shoebox!
I’m glad you made it here! Thanks for subscribing!
Nice job, I know that rusty feeling all too well lol.
It’s part of it lol have to stay practicing
I have 51’ shoebox, I have a 6” notch to install... this same method applies?
More good work bro
Thanks man!
Hope things are 👍 great
Thanks for the video man!
Thanks for watching!
@@PuddinsFabShop Yes Sir- Nice looking weld you have there too-
👊🏻👊🏻👊🏻
There it is again... Doing something looked on CZcams and there you are
🤩🤩🤩🤩🤩
What size pipe you use on travelall for c.notch
Will this work closer to the middle? Am building a V8 Ford ranger, and thinking of C notching for transfer case , any ideas?
👏
Nice Work. Ive watched all of your shoebox videos so far. What other Mods are planned for the car? Chop? shaved door handles? peaked hood?
No chop, shaved, dropped Buick trim, custom wheel wells, drenched Tailights, and shaved deck lid as far as I know
You certainly didn’t seem out of practice to me! Great welds, great work! If I could weld like you I would feel great! BTW do you know the name of the color on those wheels? I LOVE that color! Will that be the body color of the car? Keep up the good work!
Thank you! I do not know the exact color but yes it will be the color of the body! I am a fan as well of the color
👍
I just watch it again ! I liked better the second time ! Why ! Mine turned out as good !!
Heck ya!
👍👍from this guy
👊🏻👊🏻👊🏻👊🏻
Id be interested in one of your c-notch kits.
I wish I had a kit.
how much would it cost on average to c notch a 06 colorado ?
Great why buy when you can make 👍my 53 ford bread van ill try and do the same thks
Heck ya! 👊🏻👊🏻
Really surprised those box panels didn’t end up with speed holes lol
Nice work mate
Thank you!
@@PuddinsFabShop your welcome mate been following for a bit on this build I like how it's coming. Not sure mate if you have checked up my channel but please feel free to
I will do that! Thanks for following along.
@@PuddinsFabShop your very welcome mate I love all cars and love watching what you do as that where I'm hoping to go over here in Bundaberg Qld Australia when I finish my first build as my second build is going to be a full custom where I'll be doing my metal work and stuff to.
🤙🤙🤙🤙
👊🏻👊🏻👊🏻
This episode of puddin’s fab shop brought to you by dollar shave club. Haha, strange seeing you mustacheless.
It didn’t last long lol I’m growing something back, not sure what yet
@@PuddinsFabShop No more Baby-Face Puddin'! Haha!!!
My girls didn’t like it lol
what happened to thee 'stache?
Out of curiosity....what cameras do you use to record your episodes?
I have one Go Pro Hero 7. It’s not great for audio.
What saw is that? Appreciate the vid bro!
*and blade
Shit where's puddin?....Idk I'd be watching matt damon making some C notches.
Hahahahaha
Hay this video is the first time you said setting on your ass won't finish you project lol lol
whose this guy thats not our puddin he has a stash and beard
Just my 2 cents, but if you would have filled the hole on the outside of the frame before you welded in the c-notch, it would have made a weld that completely went around the perimeter of the pipe... I just don't like the look of the weld with a gap. No hatin' bro; love your videos and the nice quality work you do!! : ^ )
Valid point! You would think after doing 12,000 frames I would of thought of that lol maybe on the next one!
@@PuddinsFabShopnevous about doing this .no confendence for mineself
Who is that baby face kid?
😂😂
Almost didn't recognize you clean shaven, and wearing glasses.
😂😂😂
This is badassery
👍